Posts for: thomasm650
Dec 20, 2023 16:59:45 #
I just went through a similar experience with my Canon Speedlight strobes.
Some flash triggers do not work with all speedlights_ that is the case with Godox radio triggers and Canon. I'm figuring you have already confirmed compatibility.
Even though your picture is blurry, I do not see any icon showing an antenna_ somewhat similar to this: "!". That indicates a radio signal. Review that setup again. On the flash trigger, review if Group A is "ON". A lightning icon will indicate.
That is just a quick take on what I can make out on the screens. Once a clearer picture of the button functions on each device is posted, I may be able to walk you through more steps.
Some flash triggers do not work with all speedlights_ that is the case with Godox radio triggers and Canon. I'm figuring you have already confirmed compatibility.
Even though your picture is blurry, I do not see any icon showing an antenna_ somewhat similar to this: "!". That indicates a radio signal. Review that setup again. On the flash trigger, review if Group A is "ON". A lightning icon will indicate.
That is just a quick take on what I can make out on the screens. Once a clearer picture of the button functions on each device is posted, I may be able to walk you through more steps.
Sep 15, 2023 18:27:31 #
Rather than just hitting the button "DENOISE", you may wish to manually move the sliders below that button to see if it improves the photo to meet your expectations. I do it quite often, and it takes only a few seconds. Using the button can test your patience if you are doing it to every photo.
Jul 26, 2023 19:22:58 #
I know how aggravating having settings change when unintended. My answer is based on using an R5 but Canon's menu set up fairly standard across their models.
Go to menu> yellow tab with wrench icon> scroll until "Touch Control" (mine is in tab 4). There should be a choice to "disable".
Additionally, if you wish to use touch control, but don't want your settings to change, you should be able to "lock" settings. Mine has a small button on top of the body labeled "lock". Pushing the button also "unlocks" settings.
Download the manual to verify operations. Good luck.
Go to menu> yellow tab with wrench icon> scroll until "Touch Control" (mine is in tab 4). There should be a choice to "disable".
Additionally, if you wish to use touch control, but don't want your settings to change, you should be able to "lock" settings. Mine has a small button on top of the body labeled "lock". Pushing the button also "unlocks" settings.
Download the manual to verify operations. Good luck.
Jun 7, 2023 13:41:09 #
Good to hear you finally were able to update the firmware. A suggestion in the future is to make sure your mode dial is in "P", and you have removed the lens. That is what Canon's procedure states on their instructions for preparing the camera.
May 12, 2023 13:47:46 #
Odd, if I'm not interested then why am I here?
Aug 16, 2021 20:34:31 #
i went to a wedding recently and noticed one of the camera crew was frequently shooting into the sun. Her lens shade was attached to the lens, but was reversed, and not over the glass element. When I questioned her about the potential for flare, she replied, "I like flare."
Mar 17, 2019 18:26:34 #
Without reading every comment to see if this has already been answered, but B&H sent me email 3/14, that they WILL start collecting Calif sales tax. I believe this was required due to state legislation in 2018.
Mar 17, 2019 18:26:07 #
Jan 4, 2019 19:45:00 #
jerryc41 wrote:
They ran new wire from the pump to the underground wire that goes to the house.
You got some good answers to ask the installers. One more: Sounds like there was a splice_ are the wires proper gauge for pump electrical current draw, especially at start-up? Have them check for voltage drop from power source to pump wire termination. Following: I like a good mystery.
Dec 5, 2018 13:26:08 #
This point of view is from Yerba Buena Island, the half-way point of the Bay Bridge, seen here in the foreground. This area is more commonly know as Treasure Island which is actually a man-made structure that abuts Yerba Buena on the north side. For those not familiar, the seasonal beacon atop the Transamerica Pyramid can be seen in in one of the photos. The Embarcadero Center is outlined, along with the illuminated top of the tallest building currently in San Francisco, the Saleforce Tower.
10 sec f16 ISO 800 65mm (EF 28-70 f2.8II)
13 sec @ f16 ISO 1600 57mm (EF 28-70 f2.8II)
Jan 25, 2018 12:41:00 #
This shot was taken at one of my favorite places in San Francisco. The waves were being driven by an incoming storm, and the foreground is the lagoon and ruins of the former Sutro Baths. I was lucky to get a shot without any people present, as it can become over run with sightseers and others, who dare walk the breakwater wall that separates the ocean from the lagoon at high tide. BW coversion in LR. Particulars: Canon 5D IV; 24-20/2.8L lens at 34mm; ISO 200; 1/125@f/11.
Jan 6, 2018 11:54:39 #
Anyone have/had this feeling?
I'm not much help, but since you asked: Yes! I've had it with cars, boats, motorcycles, skis, tools, girlfriends, and... camera(s) and accessories... and the beat goes on...
I'm not much help, but since you asked: Yes! I've had it with cars, boats, motorcycles, skis, tools, girlfriends, and... camera(s) and accessories... and the beat goes on...
Dec 27, 2017 12:43:29 #
Hank Radt wrote:
I am an inveterate manual reader. Which I did when... (show quote)
Looks like you're in for some more fun learning Lightroom, Photoshop, On1, etc. No manuals either.
Dec 27, 2017 12:38:13 #
Looks like you're in for some more fun learning Lightroom, Photoshop, On1, etc. No manuals either.
Jul 3, 2017 11:23:42 #
jaymatt wrote:
Nice red, white, and blue shot--I like it!
Thanks. I was trying to be subtle.