I usually don't comment, but I have to say I feel this young lady is the most beautiful young lady I have ever seen, of all the photos you have posted. To me she has the most perfect body and her form is great. Thank you for sharing this photo and all the photos you have.

I had bought an old 4x5 Speed Graphic camera. When I bought it, it was really said the shape it was in. So I tore it all apart, bought a new bellows form China. I removed all brass and cleaned and polished it, sprayed it to stop tarnish. I replaced all brass screws. I removed the leather covering the body as it was turning green and some of the screws were in bad shape. I cleaned the wooden box, which turned out to be solid mahogany. The box, under the leather was beautiful. so I left the leather off. Now my question: Can someone tell me how to set the focal plane shutter? I could not find the tool to do so, so I made a new one from brass. I have not found any written docs on how to do this, that is why I am asking for and all suggestions. Thank you all for your time and consideration ahead of time.

My older monitor is going bad and I am looking into now monitor for photo editing. Hopefully I will not have to change out the video card [ Nvidia GeForce GTX 1.050Ti ]? I am running Win.10 Intel Core i7 6700K CPU @4.00 GHz, 16Gig Ram. 64-bit OS x64 Processor. Any suggestions/ Thank you in advance.

RobertP, I have the same printer, I have been using after market, 3rd party ink for years. I refill my cartridges but I never let them go dry. Also the ink company I use is Precision Colors @ www.Precisioncolors.com. I will make one other suggestion, Mr. Rodriguez says Do not use an old YELLOW cartridge. Buy a new empty one and start from scratch, but keep the old cartridge and remove the chip and place it on the new cartridge. If any of the other cartridges look dry, pith them, it is more work to clean them than it is worth, but first remove and mark each chip so you know which cartridge it goes with. You will need a chip gismo to reset the chips or they will not work. The re set gismo is very cheap, I think about $10.00? I have mine for years. The printer is a good printer and if you refill your cartridges it is even better. Good luck.

RobertP, If you want to now anything about the Canon Pro 100 printer, go to Jose Rodriguez Photo Printing Techie on you tube. If he can't answer your questions no one can.

jerryc41, I can tell you I don't have to repeat what others say, because I saw one hover over the Naval Base, in Philadelphia Pa, many years ago. The search lights went on and the sirens went off, which called my attention. I saw a craft go straight up and stop dead, no light, no sound. Then it took off on an angle in a split second it was out of sight. There was no mention on the news that night or the next day or ever. I know what I saw and I believe we are not the only life forms in this universe. My grand father told me he saw one land and a being get out. He was a very religious and honest man and would not say he saw something he did not.

Air Walter, next time you get a call about funeral expenses, pick it up and ask why they are calling. Then when they tell you, you tell them they are too late, this is an automated answering machine from my coffin, I am already dead. I bet they will not call back!

If you get there when you can go swimming, the pool by the hotel is filled with spring water and it is ice col and crystal clear, enjoy!

I am in the process of restoring this camera. I would like to ask for a bit of help. Does any one know where nI could purchase the "T" shape tool called "tension lock nut wrench [ # 28442 ]. If someone would be willing to rent it to me I would very grateful, otherwise I will have to try and make one? When I am finished I will post a few photos. It has been over a year, since I started, a lot of work, but I have a roll film back and film and I really want to take it take a few photos.

Thank you in advance for any help or suggestions.

Just beautiful!! I have tried many times to get shots like these, just beautiful, Thank you for sharing.

I really like this shot. I like the composition and the fact it is B&W. I also think the models are beautiful, they seem to be having a good time!
Thank you for the post, hope to see more of your work.

Great captures!!! I also shoot with the R5 and love it. Would you tell me if you were using the new RF 600mm lens and what was your aperture settings was?? Thank you, again great captures, and bird as well as any wild life photography you need patients.

I have the Canon Pro-100 and I think it is a great printer for the price. I would do [ 1 ] nozzle clean then check the head alignment. It the nozzles are clogged, take the ink cartridges out, remove the head and take a clean cloth that is used for cleaning your glasses, make it wet with distilled water. Then place the print head on the cloth and let it set for a few hours. You may have to do this more than once to get the ink in the nozzles to liquefy. Put the head back in and run a nozzle alignment again. Also be aware that the Yellow ink is the most problematic. I have two sets of cartridges and I refill them. If you do refill, never let the cartridges go totally empty. The yellow cartridge, I suggest to purchase a new one, do NOT use the one that is in the printer now. One more point, the act of cleaning the nozzles put ink into a reservoir with a piece of sponge and a sensor. Ones the ink in this reservoir trips the sensor you are DONE. There is only one known way to reset the sensor, but you have to contact a Russian gentleman for the information. Good luck, but do not do any more nozzle cleaning than you have to, just print a small photo every two days, on plain paper.

I think the shot is very well done. It does not and should not matter if the model is a Trans girl. We are all humans and should be treated as such. If you had not told us the model is a trans girl, I would never known and would never care. I think your model is is very attractive and if she would ever come the Harrisburg PA area I would liker to meet her and photograph her. Excellent job by the photographer and model, thanks for sharing.

Thank you very much. The shots were great, they really took me back!!!