Try Hugin. I assume that it is still free.
Living in Ontario with family in Nova Scotia, I have been to Quebec and the Maritimes many times. There are so many great places to photograph. I have found, though, that many spots are off the beaten track where few tourists travel. If you have the time, you might want to try areas where you think might be interesting even though not advertised.
That was it. I have now corrected it. Still don't know how I got this problem. I must have somehow pushed the button without realizing it.
Thank you for your help.
I have a Nikon D7200. I have one slot set for NEF (RAW) and the other for jpg.
About 3 days ago, I started to have a problem with both Raw and jpg.
The shots are either under exposed, over exposed, or correctly exposed. I have the camera set on burst and the different exposures can occur even within the burst shots.
Assuming that I somehow did something to account for this without realizing it or even knowing what I did, I set the camera to factory default. The problem still exists.
Any ideas or suggestions?
Thanks, Dale
RC screen. I tried the router P/W. Even my internet provider helper checked to make sure that the P/W was correct. It was. I have since contacted DJI and waiting for a response. I'm beginning to wonder it the RC might be faulty. :-(
Well, I bit the bullet and bought the DJI Mini 3 Pro RC drone. The batteries in the drone and the RC are all charged and installed.
I turned on both and I got a start-up requirement on the RC. Simple at first.
When it came time to enter a password, I had problems (attached photo). I tried passwords from the past and present for my internet router as well as my phone. I even tried the 12341234 default. None worked.
I'm 76 with a form of dementia. What one would think would be simple to do is not the case for me. I cannot adequately describe the level of frustration that I am experiencing.
I would greatly appreciate help from anyone who can help me step by step whether it's with the phone, the RC, or both.
Thank you in advance!
I am 76 with early dementia.
That being said, would a drone be difficult to learn to use? I am looking at a DJI Mini 3 Pro. I don't trust sales people as they want a sale, so I am asking those who really know - users.
I keep my external HD plugged in. My wife says that doing so will damage it. I say that it won't. Who's correct?
I would if I could. All of our roads are closed. I live in Ontario on the east side of Lake Huron in the traditional snow belt.
Alafoto wrote:
I have the same printer. Not sure what all you've tried, but the back opens and you may see the jammed paper from there.
Well, none of the other suggestions have worked and I was really hoping that yours would. Short story: it didn't. :-(
Tried that. The paper is not in the printer far enough to see it inside. :-(
The paper got jammed. I can't pull it out. It won't feed. When I open the printer, I can't see the paper to pull it out from there. Any suggestions? The printer is a Canon MG 3620.