As much as I like the B&W's more, you're doing a fine job with these. BTW, I hope you kept the B&W's for yourself. :)
As much as I like the B&W's more, you're doing a fine job with these.
Great shots. Yes NOT keeping Back Button Focus pressed will do that. Glad you figured it out.
jerryc41 wrote:
Did you ever try to buy a replacement gas cap for a lawnmower? It ain't easy. A squirrel must have stolen the gas cap off my Craftsman mower over the winter, and no one locally has a replacement. Craftsman lists the part, but it's not available. Amazon has about dozen different gas caps for mowers. Really?! Is it necessary to have so many different designs for a gas cap? I'll keep looking, and then I'll make something. Maybe I'll have to buy a new mower.
If Apple starts making lawnmowers, I bet they won't sell parts - just new mowers. "Well, you know, for the cost of the part, plus certified installation, you'd be better off buying a new Apple iMower." 🤣
Did you ever try to buy a replacement gas cap for ... (
show quote)
A piece of 4 mil plastic a rubber band.
If the mains are cast iron (not the 4" main) I'm talking the 2" which dumps into the 4", that your 1.5" sink drain is draining into. Nickles to dimes if it is in fact cast, the opening (ID) is probably down to 1" if your lucky. Cast over time rusts and begins to scale, yes just like our arteries with plaque. I had one down to about 1/2" (the cast not my arteries) before replacing everything to PVC you could try what I did, ( Being a GC for 40+ yrs it wasn't a big deal being on a roof) was to buy time before the change over, up on the roof there should be a 4" vent (depending on the age of the house). Grab a few pieces of 18'-20' (whatever it is) metal pieces of electrical conduit, from above feed one down the vent, as you go Use Gorilla tape to connect the next, depending on the height of you house, two , maybe 3 is all you'll need, Scrape off the scaling as you go down. Worked for me till I was able to have it all replaced. Good luck Jerry, keep smiling to reduce stress.
Do you use a post presets?
The Shadows on her mid section in #1 make her look even more trim at first glance... not that that's a bad thing. A fine shot.
Most bigger cards like the Nvidia RTX cards come with supports
Don't spray upwards with high pressure, you can unlock the panels. I was a General Contractor for more than 40 years and have fixed my share of siding FUPA's due to pressure washing. Get up high or hire someone (that doesn't spray up) and spray down the was siding was designed to ward off water.
Leaves room for the imagination for sure.