I was just wondering how people use their camera with dual card slots. Now I understand for paid jobs you would use one for backup (option #2), but for just shooting around, e.g., vacation, parties, general shooting, etc. What configuration do you use:

1. Auto switch (when one card gets full switches to next card)
2. Record to multiple cards
3. Only record to the selected card

Yes, keep it on.

I use FoCal 2 software to micro adjust my lenses, and this software applies the adjustment to the camera body. I also have the Tamron Tap-In console, which allows you to apply the adjustments to directly to the lens. To do this with FoCal you would record the micro adjust value set in the camera and then clear that value out. Next, you would just enter that value into the console.

1. I found if you have multiple camera bodies then it's best to apply the adjustment to the camera body. If you have just one camera I would apply the adjustment to the lens.

2. Yes, I feel that all lenses should be micro adjusted. Yes, the dock is only for sigma lens.

I use FoCal 2 software to micro adjust my lenses, and this software applies the adjustment to the camera body. I also have the Tamron Tap-In console, which allows you to apply the adjustments to directly to the lens. To do this with FoCal you would record the micro adjust value set in the camera and then clear that value out. Next, you would just enter that value into the console.

1. I found if you have multiple camera bodies then it's best to apply the adjustment to the camera body. If you have just one camera I would apply the adjustment to the lens.

2. Yes, I feel that all lenses should be micro adjusted. Yes, the dock is only for sigma lens.

I think the bottom line now is, can one still get Windows 10 for free and will an old Windows 7 computer run it????

You can revert back to the previous version Lightroom until DXO has a fix. Bring up Adobe Creative Cloud, select Lightroom Classic CC (click on down arrow, select "Other Verison". Since they will fix the problem for "PhotoLab, that means that those of us still using OpticsPro 11 will be forced to update. Dawn!!!!

Thanks! I will give that a try.

I will and thanks!

I think one question should be is how to use the software? I have both the Tap-in and FoCal software. My problem is that FoCal (I think) will not generate/create data points shown in the Tap-in console software.

Hi, for some reason my select dial has become hard to rotate. Yes, it still works, but it's very hard to move. Now I have never dropped this flash so I don't know why it's doing this and how to fix it. I'm hoping I don't have to send it into canon for repair.

Amazon!!!!!

Thank You!

There has been no update on the operating system for updates since 2015.

Hi, can these devices firmware be updated using a Windows 10 computer? I remember when I first got these units you could only use Windows 7 to update the firmware.

THX

If you are only want to carry either an Ipad or Android device along with your camera take a look at this:

https://www.amazon.com/RAVPower-Wireless-Portable-Companion-Streamer/dp/B016ZWS9ZE/ref=cm_cr_arp_d_product_sims?ie=UTF8

Yes, you will still need a portable hard drive, but the RavPower will power the drive and download your pictures the drive.