I always buy ink on ebay and have always been happy and get good results. I take many pictures at our church and often time make prints for different families. I take all the babtism pictures and make prints for them. I can not tell the difference with the so called cheap ink and the manufactures....I just put in an order today on ebay for 18 cartriges of in for canon 6220 for 17.80.. my canon printer holds 6 and 1 cartridge at target is about 17.00 dollars....I have been buying cheap ink for about 5 or 6 years and I had 1 defective cartridge that was leaking I through away.......

Thanks to all of you that have tried to help me....when I discover what my problem is I will reveal it to you..this web site is very helpful and much appreciated,thank you all again....cp

Jerry.....I am 1/2 pressing and shooting in all the modes but I dont have any viewfindder info appearing in the middle from about 11 to 17 on the chart is nothing

Correct is the answer Jerry...but I have no hashmarks appearing thru the view finder....even after go back to default.

Jerry, I just tried the 2 green dots and held the af and +- for more than 2 seconds with no change...Jerry at the bottom of my camera in the back I have an info button that when pushed reveals to me exactly what I used to see thru my viewfinder.

forgive my ignorance Jerry

forgive my ignorance Jerry

Bob I have no hash marks appearing at all

Jerry I am not sure what you mean by the command dial but it sounds like maybe thats what I am asking. Please give me your ideas..

Thanks for your help Bob I tried all of your sugestions with no results... their has to be something in the manual to go to , to restore this feature

Thanks Cheryl for your reply....You might be right but I think I lost + - feature through the viewfinder experimenting and I was hoping someone would tell me how to reset....(I have tried the "reset" on the camera with no results)

I really dont need the + - adjustment in the Aor S mode because the AF will adjust for me.....my question applies only to the manual mode.......I used to have this feature through the viewfinder but I did something inadvertently as I was experimenting with the variious settings and I dont know how to undo what I did to regain this feature....

Thanks for your help Mike but let me reframe the question..I used to be able toset my camera on manual mode and with my eye at the viewfinder focusing my subject be able to go to the command dial change my exposure up or down as I was looking thru the view finder....I am not able to get the focus info(+or-) to appear in my viewfinder as it once was so to find out what to set my lens at I have to take a test shot or put camera on af to get areading.....

several months ago I was able to look in the view finder and see how to adjust my exposure on the plus or minus. this was particularly useful in the manual mode for me.....Now I am unable to access it. I know I changed something in my experimenting but nothing I do seems to restore my view finder info....I would appreciate any help on this ,thanks to all for your help.....ps....I know about the info button on back side of camera, it works ok......I used to have the same info thru the view finder.

Thank you David T. and Wahawk for your help! for 13.95 I think that will be my next move....This UHH site is a great resource for all of us....