Bullethole, There is another thread on UHH that mentioned Scotch Mounting Adhesive. It is available in three widths 11"x50", 16"x50 & 24"x50. I purchased the 16"x50 and it really works well. I only have been using for 6 month , but photos have not released from mounting board. I would highly recommend it!!! Thanks to whoever recommended it! See link below:

https://www.bhphotovideo.com/c/search?Ntt=Scotch%20mounting%20Adhesive&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search=

I am interested in the Tamron 10-24. Can u give more info, like age and condition.

I took photos of a motorcycle @ f22 and the reflections from the chrome had the star effect similar to this. You may want to check meta data again for aperture settings. I agree with zigipha, 6.9 is an unusual aperture setting.

Had the same problem! I feel your pain and frustration! Printed some B&W prints and printer would only print in B&W. I checked all sertiings over and over and found a check box in printer setup that stated for "black and white photo prints" I unchecked it and been printing color ever since. It's hard to find. From printer setup menu select "print Settings" then the 5th line down there is a double up/down arrow that reveals about 10 options. Select "Quality & Media" You will see the check box near the bottom of the page!

My Sony A77 & A99 shut off VR when bulb is selected, but bulb not used on all tripod shots!

Very sharp lens! Manual focus, which is not a problem since it focuses from inches to infinity. You focus on nearest subject distance and forget it. It is also for APS-C sensor. I use it on my Sony A77 which has focus peaking feature that helps when manual focusing. Would highly recommend. I shot a covered bridge that was 120 feet long standing on replacement bridge about 60 feet away and include a view of 10 ft extra on each end. Had to hold camera level as it would show bridge bowed if not level. Had my legs against guard rail and leaned forward and it included posts rail was mounted to. I think field of view is 167 degrees, but can get feet in photo if u don't lean body forward.

Upgraded late 2013 MacBook Pro with no problems. I use PS CS6, Lightroom 5, ON1, Aviria, and NIK Plugins. No problems! If it's showing up in software upgrades, then it is compatable. It will just show software is up to date and will not show Sierra update if not!

Kerelowe, I needed to upgrade my PC and after hearing testimonials from the UHH group about how Mac's were great for photo editing I purchased a 13" MacBook Pro late 2013 from Best Buy when they were upgrading models and got it for $1199 in the fall of 2014. It has a 2.4GHz Intel Core I5 processor, 256 flash drive 8gb memory. I run PS CS6, LR5, ON1, and Aurora HDR 2017 and all the NIK plug-in's and rarely every see the little processing wheel. I process some video from my DJI drone and edit using iMovie and that works well also, but rendering takes some time. I wasn't sure I would like the MacBook, so I purchased low $ model. Would never go back to PC! I connect to a 27" ASUS monitor when I am at home and use a 7 port USB 3.0 Hub to connect my 2 printers, Scanner, Wacom Tablet, and 2 portable drives for backup purposed and have a AirPort 2gb that backs up my MacBook daily. I also calibrated MacBook and 27" Asus monitor with Datacolor 5 and everything looks same on both monitors. I like the 13" for light weight and portability. The I7 processor and 16gb model would probably render videos faster, but at a cost of nearly $2500. Currently happy with performance with this model and no plans to upgrade as long as it continues to work as well as it does. I have also upgraded to mac OS Sierra. Upgrade went well and operates great on new OS.

Thanks! Nice Mill, would like to visit and take some photos. Really like composition of your shots!!!

All shots are very nice! I would also like to know the location of the mill. Would U happen to know the mile marker it is close to?

No problems with my MacBook Pro!

Mainoak - I just downloaded Topaz Remask Prime from the app Apple App Store. I did a 30 day trial of the Topaz Remask and liked, but the $69.99 price was a little much for my infrequent use. The Remask Prime works just like the trial version,but is a stand alone app. It does not work as a plug-in. This web link to Topaz explains the difference in the two apps. At $9.99 it is reasonable for infrequent use.https://support.topazlabs.com/hc/en-us/articles/218443017-What-s-the-Difference-Between-the-App-Store-Version-and-the-Topaz-Store-Version-

Yes, they are refueling for their return home from the winter migration. Thanks for looking

All Photos shot in Raw slightly cropped, sharpened and processed in ACR.

Tamron 150-600 420mm 35mm equiv ISO 400 1/500 f13

(Download)

Tamron 150-600 630mm 35mm equiv ISO 400 1/500 f14

(Download)

Tamron 150-600 900mm 35mm equiv ISO 400 1/500 f11

(Download)

Sony A77II Tamron 150-600 900mm 35mm equiv ISO 400 1/500 f11

(Download)

Sony A77II Tamron 150-600 900mm 35mm equiv ISO 400 1/500 f11

(Download)

Taken at my feeder last week