An Ounce Of Prevention.....
I have as SD card reader built into my computer. Yesterday, I took the card out of my camera, inserted it in the slot on the computer, and dowloaded the photos to my computer. As I was inserting the card back into the camera, somehow, I noticed that the card appeared to be separating into two halves. Sure enough, I checked it, and it was separating. I don't know when it started separating, but I was thinking, it would be a shame to go out on a photo shoot, take photos all day long, and find out the card was defective. Now, yes, I have dual card slots, and I can code the second card slot as backup, but, still, I will, every time I remove the card from my camera, give it a careful visual inspection before reinserting it into the camera.
Since you are going to toss the card (I assume) now would be a good time to see just how the cards are constructed. I suspect the chip is mounted to the side with the contacts, but going ahead and splitting the halves would resolve that question. Of course, photos are expected.
I wouldn't think the card would be bad-I would just glue the case back together and try it out.
Thoughts?
SD cards are light duty compared to CF and other newer designs. Every device has a realistic working life so you’re especially smart to check SD’s on a regular basis. Another good reason for dual card slots as some nay-sayers have commented on recently. The good thing is they’re the cheapest on the market.
I try to take the cards out of camera as little as possible. I use Nikons file transfer program and a cable. Still it's good to check the card from time to time.
starlifter wrote:
I try to take the cards out of camera as little as possible. I use Nikons file transfer program and a cable. Still it's good to check the card from time to time.
I fear the cable transfer will causes a bad connector on the camera body. I take my chances with the cards. I have had one split or crack more than once so a card should always be inspected and be removed/replaced with care.
Gene51
Loc: Yonkers, NY, now in LSD (LowerSlowerDelaware)
jradose wrote:
I have as SD card reader built into my computer. Yesterday, I took the card out of my camera, inserted it in the slot on the computer, and dowloaded the photos to my computer. As I was inserting the card back into the camera, somehow, I noticed that the card appeared to be separating into two halves. Sure enough, I checked it, and it was separating. I don't know when it started separating, but I was thinking, it would be a shame to go out on a photo shoot, take photos all day long, and find out the card was defective. Now, yes, I have dual card slots, and I can code the second card slot as backup, but, still, I will, every time I remove the card from my camera, give it a careful visual inspection before reinserting it into the camera.
I have as SD card reader built into my computer. Y... (
show quote)
I had a pair of Sandisk cards do the same thing. The best part is they have a lifetime warranty. So I contacted Sandisk, they asked for pictures, and 3 days later I had a pair of brand new cards.
ejones0310 wrote:
Since you are going to toss the card (I assume) now would be a good time to see just how the cards are constructed. I suspect the chip is mounted to the side with the contacts, but going ahead and splitting the halves would resolve that question. Of course, photos are expected.
The IC(s) and connector wires are probably potted in a dollop of black epoxy.
DirtFarmer
Loc: Escaped from the NYC area, back to MA
starlifter wrote:
I try to take the cards out of camera as little as possible. I use Nikons file transfer program and a cable. Still it's good to check the card from time to time.
So you are wearing out the cable connection rather than the card connection.
Which one is cheaper to replace?
DirtFarmer wrote:
So you are wearing out the cable connection rather than the card connection.
Which one is cheaper to replace?
I'd rather go with using the card.
I've not had one separate in over 10 years.
When I pried an adapter apart to see what was inside, I really had to work at it to do so and not destroy the case!
That’s what I think, in which case the case coming apart isn’t an issue. A drop of glue on the edges and it should be right as rain. But, if he is going to pitch the card, we might as well find out for sure.
ejones0310 wrote:
That’s what I think, in which case the case coming apart isn’t an issue. A drop of glue on the edges and it should be right as rain. But, if he is going to pitch the card, we might as well find out for sure.
Don't know if I'd glue it.
Some <non-plastic> glues will dry out and flake off over time.
Some plastics do not let glues stick to them well.
I'd retire the card and open it.
(After it has been unloaded.)
I should not have said glue. Cement or epoxy should do the trick. Just be sure to not over do it and to make sure it’s dry and any excess trimmed off before inserting.
If you are that desperate to save a few bucks, take a low-wattage soldering iron and spot weld the edge of the card farthest from the contacts.
Use a sharp pocket knife (remember those?) and trim off the flash.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.