I have one for crosscuts and one for miter cuts. I have a large Grizzley contractor style table saw that is very hard to get the table top parallel with the blade. I’m close but not exact. My sleds do better than I can do with my cheap miter gauge.
Walkabout08 wrote:
Worth the time to build one. Be sure to square the fence using the so called 5 cut method. You’ll be happy you did.
Right. Building one will give me an excuse to work in the garage for a while. That 5-cut method is interesting.
gvarner wrote:
I have one for crosscuts and one for miter cuts. I have a large Grizzley contractor style table saw that is very hard to get the table top parallel with the blade. I’m close but not exact. My sleds do better than I can do with my cheap miter gauge.
A lot of the online builders have the SawStop table saw. If they weren't so expensive (and if I was younger), I'd get one. I still have all ten fingers, but I almost removed a thumb with a Dremel.
Burtzy
Loc: Bronx N.Y. & Simi Valley, CA
Do you have any snow-covered hills down which to ride your table saw?
MrMophoto
Loc: Rhode Island "The biggest little"
I taught woodworking and cabinet making in a public high school for ten years. We had two table saws, 16" and 10", I built sleds for both, best thing I ever did. Not only did it increase students precision, but it eliminated all kickbacks associated with crosscutting. I installed a riving knife to eliminate kickbacks when rip cutting. I didn't have an accident on either table saw for years
Burtzy wrote:
Do you have any snow-covered hills down which to ride your table saw?
My driveway slopes down, and when I see the UPS truck coming up the street, I spray water on it. Always good for a laugh in the winter.
Speaking of a table saw, isn't that what you would use to saw a table. A comic from yesterday made me think of that - "General Store."
Jerry, why don't you build two of them so you'll be fixed for the next 100 years.
ecblackiii wrote:
Jerry, why don't you build two of them so you'll be fixed for the next 100 years.
100 years? Do you think I'm going to be in any shape to make another sled in 100 years? I should make three now.
bonjac
Loc: Santa Ynez, CA 93460
Walkabout08 wrote:
Worth the time to build one. Be sure to square the fence using the so called 5 cut method. You’ll be happy you did.
I hate to butt in here, but what is the 5 cut method? Where could I find it described?
Thanks Jack
joecichjr
Loc: Chicago S. Suburbs, Illinois, USA
jerryc41 wrote:
I'm wondering if I should go to the trouble of building a sled for my table saw. I've gotten by without a sled for fifty years. I've been watching a lot of Jonathan Katz-Moses on YouTube, and he recently posted plans for a very fancy do-everything sled. I can see it costing me near $100 for the lumber and hardware. There are probably dozens of others shown online and in books I have, but do I need one. I'm sure my life would be easier with one, but...
This will require some thought.
https://www.katzmoseswoodworking.com/new-products/katz-moses-multi-table-saw-sled-free-plansI'm wondering if I should go to the trouble of bui... (
show quote)
It it were me, I would build a lawn mower for my table saw so I could just sit around more...
Definitely YES. A sled was the first table saw gadget I made, nearly 30 years ago. I use it more then any other. Probably less than $10 in scrap material. Just make sure base is solid and everything is square. And you have the slot covered where saw blade exits the sled.
Go for the sled Jerry, it’ll give you something to do now and it’ll be fun to use in the summer.
Even with a Beesmeyer 50” fence on my saw I still find uses for a sled. I love making home made jigs and fixtures. Especially when they work well.
Remember he who dies with the most toys wins! (I don’t know what you win, but you win)
Ron
fecraly wrote:
Definitely YES. A sled was the first table saw gadget I made, nearly 30 years ago. I use it more then any other. Probably less than $10 in scrap material. Just make sure base is solid and everything is square. And you have the slot covered where saw blade exits the sled.
Yep!! This!
I built mine about 20 years ago. At the same time I built several other gadgets that I used so little I gave them away. I got a lot of my ideas looking at the Rockler catalogs I used to get.
ab7rn
Loc: Portland, Oregon
jerryc41 wrote:
I'm wondering if I should go to the trouble of building a sled for my table saw. I've gotten by without a sled for fifty years. I've been watching a lot of Jonathan Katz-Moses on YouTube, and he recently posted plans for a very fancy do-everything sled. I can see it costing me near $100 for the lumber and hardware. There are probably dozens of others shown online and in books I have, but do I need one. I'm sure my life would be easier with one, but...
This will require some thought.
https://www.katzmoseswoodworking.com/new-products/katz-moses-multi-table-saw-sled-free-plansI'm wondering if I should go to the trouble of bui... (
show quote)
I have found tjhat a sled makes cutting small parts much saefer.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.