Looks like it will make a lot of screws Frank!
Don
How many screws can you buy for the cost plus repairs for that sucker?
Manglesphoto wrote:
A tool I really needed to make small screws
Okay something I probably won't use very often, but the price was right. My son-in-law bought it for $100 to keep it out of the scrap pile and didn't really have a place for it, he knew I was looking for a
lathe with quick change and ask if I had room for it. It is a little bigger (okay a lot) than what I was looking for but it will do especially for making those special 5-40 machine screws I need
First order of business : Clean it up its been sitting for years and not well protected from the weather however it is not all rusty, just dirty and gummy.
Second: Rewire the motor hopefully for 220v
Third: Repair or make a lock for the Backgear Lever.
OH Crap I need to move my Thermometer.
A tool I really needed to make small screws img ... (
show quote)
Looks like a lucky find at a great price.
ImageCreator wrote:
How many screws can you buy for the cost plus repairs for that sucker?
I'll make you a deal, You find a 5-40 and I'll do the math and let you know
So far my cost is zero, and will remain that way.
BTW I was joking about the screw.
Thorny Devil wrote:
Looks like a lucky find at a great price.
My son-in-law found, bought, delivered and put in my shop. I'm getting it cleaned up, right no you can stand next to without getting greasy.
I found the problem with the back gear after cleaning the gears of grease and metal chips (which were not the problem) The flat belt had been fasten together with bolts and nuts, the nuts were on the outside of the belt and they hit the back gear shaft knocking it out of gear, so making a new belt with proper fasteners is in the works, belt material N/C alligator lacing $3.00.
I am almost anal on machine functions working even if they will never used
, drives my S-i-L crazy
Manglesphoto wrote:
My son-in-law found, bought, delivered and put in my shop. I'm getting it cleaned up, right no you can stand next to without getting greasy.
I found the problem with the back gear after cleaning the gears of grease and metal chips (which were not the problem) The flat belt had been fasten together with bolts and nuts, the nuts were on the outside of the belt and they hit the back gear shaft knocking it out of gear, so making a new belt with proper fasteners is in the works, belt material N/C alligator lacing $3.00.
I am almost anal on machine functions working even if they will never used
, drives my S-i-L crazy
My son-in-law found, bought, delivered and put in ... (
show quote)
Just picturing running a belt joined with nuts and bolts makes me shudder just thinking about the damage to the pulleys not to mention hitting other exposed parts.
Looks like a worthwhile project - have fun Frank!
I have a few 5-40 1" socket head cap screws, black oxide and stainless.
Can spare a few.
Manglesphoto wrote:
A tool I really needed to make small screws
Okay something I probably won't use very often, but the price was right. My son-in-law bought it for $100 to keep it out of the scrap pile and didn't really have a place for it, he knew I was looking for a
lathe with quick change and ask if I had room for it. It is a little bigger (okay a lot) than what I was looking for but it will do especially for making those special 5-40 machine screws I need
First order of business : Clean it up its been sitting for years and not well protected from the weather however it is not all rusty, just dirty and gummy.
Second: Rewire the motor hopefully for 220v
Third: Repair or make a lock for the Backgear Lever.
OH Crap I need to move my Thermometer.
A tool I really needed to make small screws img ... (
show quote)
The lathe looks well used. On the other hand, the bright red oil can looks marvelous.
Quit a lathe...I have a lot of tools, but no lathe...
Chuck
Manglesphoto wrote:
A tool I really needed to make small screws
Okay something I probably won't use very often, but the price was right. My son-in-law bought it for $100 to keep it out of the scrap pile and didn't really have a place for it, he knew I was looking for a
lathe with quick change and ask if I had room for it. It is a little bigger (okay a lot) than what I was looking for but it will do especially for making those special 5-40 machine screws I need
First order of business : Clean it up its been sitting for years and not well protected from the weather however it is not all rusty, just dirty and gummy.
Second: Rewire the motor hopefully for 220v
Third: Repair or make a lock for the Backgear Lever.
OH Crap I need to move my Thermometer.
A tool I really needed to make small screws img ... (
show quote)
Good score for a hundred bucks. Looks like a 8 inch direct thread 4 jaw chuck. An old overhead belt powered job. Please post the mfg. name, could be a South Bend. Would love to help you re-build but live in Oregon. I have a 18 by 80 inch Clausing Colchester I do gun and photo accessory work on. It looks like an 14 inch swing on yours, nice size. Why don't you just by 5-40 screws from Mcmaster Carr or someplace else? Oh...that (access) door on the left front is for stashing your 5th of whiskey, I think you might be able to fit a half gal of red mtn. there too in an emergency.
Thorny Devil wrote:
Just picturing running a belt joined with nuts and bolts makes me shudder just thinking about the damage to the pulleys not to mention hitting other exposed parts.
A lot of those old lathe belts were actually held together with heavy stapples back in the day. I got to help make some break cylinder parts for a friend's car back in the 1960s in a very old but fully functional shop in Etna Calif.
All the machinery in this shop was driven by belts running from arbors along the roof. You had to change speeds with a two by four piece of wood while the lathe was put in neutral as these arbors ran continuously. This shop was just like it was in the late 1800s and I had no camera with me to photograph it. We broke down at The Forks of the Salmon and had to be towed to Etna. At least the guy that owned the place was cool enough to let me use his shop when I told him I was a tool maker. He was a little reluctant at first...cause I had hair down to my hips back then.
Wow !!! Quite a machine. Looks pretty big for just making 5-40 machine screws, but just think about the possibilities it offers.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.