BobHartung wrote:
Yes! Once I clarified the HDMI port, I pulled the trigger. In the past, I always tried to "right-size" my purchases, but this time I said "What the H%^&", you only live once. I purchased the biggest Ultra processor with 128 GB ram and 8 TB SSD. Coupled with my pair of 42 TB RAID arrays connected by fiber optic cable it should really run rings around my 2013 Mac Pro. I looked Thursday and deliver would have been the middle of April. I waited until Friday and now the delivery time will be the end of May into the first two weeks of June. This suggest to me that they are selling like hotcakes.
So this release coupled with the announced cessation of offering a 27" iMac except in the Pro version would push a lot of people toward this decision. My thoughts only.
Yes! Once I clarified the HDMI port, I pulled the... (
show quote)
I am sure your new computer will prove to be mind-blowingly fast and capable! That specification will effortlessly edit 8K video for major motion pictures, according to one review I read.
Even though you said you wanted HDMI, for photo editing, I strongly encourage you to connect your monitors via Thunderbolt (USB-C) or DisplayPort connections, if available on the monitor. Thunderbolt 4 on the Mac incorporates BOTH DisplayPort and HDMI, plus USB4, including data, Ethernet, and just about any other signal you want to use. Thunderbolt is why Apple can get away with a sealed box... It connects anything at up to 40Gbps (or the maximum speed of what you connect). Thunderbolt 4 and USB4 are the same standard, essentially. They use the USB-C connector.
One bit of caution: When buying cables, consider the future. Buy ThunderBolt 4 cables. They work with ANY devices that use USB-C connectors, at the MAXIMUM SPEED of those devices. If you connect a USB-C cable for a 5 Gbps device to a Thunderbolt 3 or 4 drive, and connect the other end to the Mac Studio, you will get no more than 5 Gbps from your fast Thunderbolt drive. THE CABLES MATTER. Don't confuse them. When you buy a device, label the cable, "For use with... ONLY."
My son found this out the hard way by connecting an external drive using a cheap USB-A to USB-C adapter plug. The drive crawled. When we switched to a fast USB-C (10Gbps) cable, the drive ran twice as fast.
It is worth downloading Blackmagic Disk Speed Test if you use external drives of any kind. It will keep your system honest. With all that "horsepower" in the Mac Studio, you don't want to bottleneck it with the wrong cable, hub, dongle, or adapter.
I have options for how I connect outboard devices, so I found the best ones by testing each drive connected each way. My Samsung T7 drive got a lot faster when I bought a new cable for it. It had been limited by the cheap USB cable it came with! I also found that connecting it to my USB-C hub cost me 10% write speed and 20% read speed, compared to plugging it directly into Thunderbolt 3 on my MacBook Air, using a USB C-to-C 10 Gbps cable.
My monitor has a USB-C connection that charges my M1 MacBook Air. It also connects a 2-port hub on the back of the monitor, but that hub is S L O W. It's fine for keyboards and mice, but too slow for drive access. It gives me only five percent of the speed my T7 drive can run!
So test that connection...