I'm very happy this worked out for you. I have two backups of all my images, each backup on a different system.
--Bob
AzPicLady wrote:
Last week, I decided to print out an image that I took last November. It is posted to my website, so I can order prints from them, but I wanted to do it myself. So I went to the folder where it resides, and lo and behold, I couldn't open the folder! LR said the file was "not available" and when I tried to link it, it refused. Windows said the folder had been "corrupted." I was heartsick!
After some thought time, it occurred to me that a) the image(s) might still be on a memory card, since I don't reformat them very often, and b) I try to make it a habit to download images to two different places - one in a folder of images from that camera, and the other folder named for the place. I tried the memory cards to no avail. Since my camera downloads reside on different hard drives, I started trying the hard drives and finally went to one of my back-up drives. There they were!!!!! I don't back-up folders as often as I should, but this time I did and my images were saved. I couldn't get LR to reconnect them, so I had to do that work over again. But that's OK. I have my images! Yeah.
A word to the wise: Always have images in more than one place!!!!!
Last week, I decided to print out an image that I ... (
show quote)
And please...check that your pictures are properly downloaded to your primary and backup drives!!!
I have 2 x 2Tb external drives, 1 x 1Tb SSD (pictures only), and 1 x 6Tb network attached drive.
My download session is to all of them before I format the card. Of course, the weakness here is that all the drives are in my house...
[quote=Cwilson341]I've learned that lesson a couple of times! When setting up a new computer, my husband accidently wiped one of my drive that was all photos. He was devastated but Carbonite saved the day and I got them all back. It tooks a bit of time but was well worth it.
I now keep backups on different drives as well.[/iquote]
I did the same, except, not having read the fine print, I learned afterwards that Carbonite doesn't automatically backup any videos, although they can be manually backed up. Lost all the videos on that drive, but I did have some of them on another drive.
AzPicLady wrote:
Last week, I decided to print out an image that I took last November. It is posted to my website, so I can order prints from them, but I wanted to do it myself. So I went to the folder where it resides, and lo and behold, I couldn't open the folder! LR said the file was "not available" and when I tried to link it, it refused. Windows said the folder had been "corrupted." I was heartsick!
After some thought time, it occurred to me that a) the image(s) might still be on a memory card, since I don't reformat them very often, and b) I try to make it a habit to download images to two different places - one in a folder of images from that camera, and the other folder named for the place. I tried the memory cards to no avail. Since my camera downloads reside on different hard drives, I started trying the hard drives and finally went to one of my back-up drives. There they were!!!!! I don't back-up folders as often as I should, but this time I did and my images were saved. I couldn't get LR to reconnect them, so I had to do that work over again. But that's OK. I have my images! Yeah.
A word to the wise: Always have images in more than one place!!!!!
Last week, I decided to print out an image that I ... (
show quote)
I save NO images on my OS Harddrive, they are all saved on 3 external drives that are only turned on when I am working on the images.
cameraf4 wrote:
I love happy endings. Glad that things worked out for you. Lesson Learned.
And relearned, and relearned, and relearned. . . .
rmalarz wrote:
I'm very happy this worked out for you. I have two backups of all my images, each backup on a different system.
--Bob
If I didn't have so many images, I'd like to go to the 2 backups on everything. Unfortunately, my office s already chock full of hard drives, and it would take twice that many to do it even again. I know that having 1 back-up offsite is a good thing. Unfortunately I don't have anywhere to put another set.
george19 wrote:
And please...check that your pictures are properly downloaded to your primary and backup drives!!!
I have 2 x 2Tb external drives, 1 x 1Tb SSD (pictures only), and 1 x 6Tb network attached drive.
My download session is to all of them before I format the card. Of course, the weakness here is that all the drives are in my house...
That's one trick I've never pulled. In fact, my cards still have pictures on them from trips two years ago!
[quote=HRPufnstuf]
Cwilson341 wrote:
I've learned that lesson a couple of times! When setting up a new computer, my husband accidently wiped one of my drive that was all photos. He was devastated but Carbonite saved the day and I got them all back. It tooks a bit of time but was well worth it.
I now keep backups on different drives as well.[/iquote]
I did the same, except, not having read the fine print, I learned afterwards that Carbonite doesn't automatically backup any videos, although they can be manually backed up. Lost all the videos on that drive, but I did have some of them on another drive.
I've learned that lesson a couple of times! When ... (
show quote)
Sorry about your videos. I thought I had lost everything in a burglary when they stole my computers AND my hard drives. But I did get my hard drives back. So what I ended up losing were my slides that hadn't been scanned yet. Nothing is totally safe!
Manglesphoto wrote:
I save NO images on my OS Harddrive, they are all saved on 3 external drives that are only turned on when I am working on the images.
I had a long conversation with my computer guru last night. The new hard drive I purchased to be yet another backup doesn't work properly. So I'm afraid I'll have to take it back. He's wanting me to put in enough internal memory to hold all my pictures. I'm not sure I really want to do that! But he says that the reason my computer quits on me is because I have too many externals plugged in.
AzPicLady wrote:
Last week, I decided to print out an image that I took last November. It is posted to my website, so I can order prints from them, but I wanted to do it myself. So I went to the folder where it resides, and lo and behold, I couldn't open the folder! LR said the file was "not available" and when I tried to link it, it refused. Windows said the folder had been "corrupted." I was heartsick!
After some thought time, it occurred to me that a) the image(s) might still be on a memory card, since I don't reformat them very often, and b) I try to make it a habit to download images to two different places - one in a folder of images from that camera, and the other folder named for the place. I tried the memory cards to no avail. Since my camera downloads reside on different hard drives, I started trying the hard drives and finally went to one of my back-up drives. There they were!!!!! I don't back-up folders as often as I should, but this time I did and my images were saved. I couldn't get LR to reconnect them, so I had to do that work over again. But that's OK. I have my images! Yeah.
A word to the wise: Always have images in more than one place!!!!!
Last week, I decided to print out an image that I ... (
show quote)
I just Love a story with a Happy Ending!
The next round is on you!
Smile,
JimmyT Sends
Bravo Zulu
My backups have backups that have backups.
AzPicLady wrote:
Last week, I decided to print out an image that I took last November. It is posted to my website, so I can order prints from them, but I wanted to do it myself. So I went to the folder where it resides, and lo and behold, I couldn't open the folder! LR said the file was "not available" and when I tried to link it, it refused. Windows said the folder had been "corrupted." I was heartsick!
After some thought time, it occurred to me that a) the image(s) might still be on a memory card, since I don't reformat them very often, and b) I try to make it a habit to download images to two different places - one in a folder of images from that camera, and the other folder named for the place. I tried the memory cards to no avail. Since my camera downloads reside on different hard drives, I started trying the hard drives and finally went to one of my back-up drives. There they were!!!!! I don't back-up folders as often as I should, but this time I did and my images were saved. I couldn't get LR to reconnect them, so I had to do that work over again. But that's OK. I have my images! Yeah.
A word to the wise: Always have images in more than one place!!!!!
Last week, I decided to print out an image that I ... (
show quote)
Jimmy T wrote:
I just Love a story with a Happy Ending!
The next round is on you!
Smile,
JimmyT Sends
Bravo Zulu
My smile was pretty big when I found those images! It hasn't always happened that way.
AzPicLady wrote:
I had a long conversation with my computer guru last night. The new hard drive I purchased to be yet another backup doesn't work properly. So I'm afraid I'll have to take it back. He's wanting me to put in enough internal memory to hold all my pictures. I'm not sure I really want to do that! But he says that the reason my computer quits on me is because I have too many externals plugged in.
As a means of confirming the guru's recommendation, do the following:
While holding down the CTRL and ALT tabs hit delete to open your "Task Manager".
When the "Task Manager" opens click on "Performance".
Now open everything that you normally have open when you are processing pics, backing up files, etc.
Now load a large Raw file into a heavy RAM user like Topaz Sharpen AI and "Save".
While your computer is chugging along bring the "Task Manager" back up (ALT/TAB should do it) and observe first hand if the Processor, RAM, is the problem.
Computer folks, please chime in as I want to know if I am wrong or how I may improve.
It's an Old Dog/New Tricks thing. I love to learn practical things.
Best wishes, and . .
Smile,
JimmyT Sends
Jimmy T wrote:
As a means of confirming the guru's recommendation, do the following:
While holding down the CTRL and ALT tabs hit delete to open your "Task Manager".
When the "Task Manager" opens click on "Performance".
Now open everything that you normally have open when you are processing pics, backing up files, etc.
Now load a large Raw file into a heavy RAM user like Topaz Sharpen AI and "Save".
While your computer is chugging along bring the "Task Manager" back up (ALT/TAB should do it) and observe first hand if the Processor, RAM, is the problem.
Computer folks, please chime in as I want to know if I am wrong or how I may improve.
It's an Old Dog/New Tricks thing. I love to learn practical things.
Best wishes, and . .
Smile,
JimmyT Sends
As a means of confirming the guru's recommendation... (
show quote)
When I had this computer built, I told them I wanted 32G of RAM. The guy said 'no one needs more than 16 ever." I should have stuck to my guns, I think and insisted on the 32!!
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.