Camera Neck Strap
Jun 21, 2019 08:13:54 #
Jun 21, 2019 08:41:58 #
I have this strap and really like it. It does have a safety strap that’s not shown so in the event the main fastener gets bumped and opened the camera will not fall on the ground. This has never happened to me though. As for the large mounting bracket I don’t like. It just adds weight and I don’t understand why it’s shaped like it is or as large as it is.
I do like the product but if I were to buy another I would purchase one that others have mentioned that screws directing into the tripod mount.
I do like the product but if I were to buy another I would purchase one that others have mentioned that screws directing into the tripod mount.
Jun 21, 2019 08:58:46 #
Check out Peak Design straps. (peakdesign.com) They can be used as neck straps or easily adjusted to across the chest shoulder straps. They also use a Arca connector for the strap that fits into the tripod mount, but allows the use of a tripod without moving anything. I have used them for years on all of my cameras with no problems, even with a heavy Canon 1ds iii and an attached Canon 100-400 zoom.
Jun 21, 2019 09:07:03 #
Jun 21, 2019 09:22:45 #
woodworkerman wrote:
On some occasions I like to have 2 cameras when I ... (show quote)
I got a double harness made by the same company. It looks and works fine but I'd rather use two separare shoulder straps that I made instead.
Jun 21, 2019 09:45:55 #
juan_uy
Loc: Uruguay
Flattop57 wrote:
I have this strap and really like it. It does have... (show quote)
You could buy just the piece that you need.
Something like this:
https://www.amazon.com/BlackRapid-020728-Breathe-FR-5-FastenR/dp/B01LFSFQCM/
Probably way cheaper similar options if you look around.
Jun 21, 2019 09:58:24 #
I guess I'm the weird guy here. I quit using a camera strap about 10 years ago.
I got a Think Tank sling bag. It has a strap that goes around my shoulder (OK, so I do use a strap after all). The bag goes on my back like a backpack but the strap can slide around so the bag is placed on your belly with the top up so you can get at what's inside. Closing the flap on the bag you can rest your elbows on it for support.
I carry 2 FX bodies, one with a 24-70 and the other with a 70-200 (or sometimes a 200-500). The camera I'm using at the moment gets carried in my right hand. If I need both hands for something I can bend my elbow and place the lens in there and press the camera against my body. I should note that I do not do street photography, most of what I do is private events and meetings. If I want to switch bodies I just slide the bag around front and take the next one out and place the current one in.
In all the years I have been doing that I have never dropped the camera. Most events are 6-12 hours.
I got a Think Tank sling bag. It has a strap that goes around my shoulder (OK, so I do use a strap after all). The bag goes on my back like a backpack but the strap can slide around so the bag is placed on your belly with the top up so you can get at what's inside. Closing the flap on the bag you can rest your elbows on it for support.
I carry 2 FX bodies, one with a 24-70 and the other with a 70-200 (or sometimes a 200-500). The camera I'm using at the moment gets carried in my right hand. If I need both hands for something I can bend my elbow and place the lens in there and press the camera against my body. I should note that I do not do street photography, most of what I do is private events and meetings. If I want to switch bodies I just slide the bag around front and take the next one out and place the current one in.
In all the years I have been doing that I have never dropped the camera. Most events are 6-12 hours.
Jun 21, 2019 10:05:04 #
AndyT wrote:
Being familiar with that type of clip hook, one accidental upward brush or catch on something it it spreads wide open dumpi g your camera 3 feet south. I wouldn't feel safe with it at all.
There is a strap that comes with it that fits through the regular strap slots. Yes so glad I always use the strap in addition to the plate because it saved my camera from hitting the floor a few times when the screw thing on the plate came loose.
Jun 21, 2019 10:21:38 #
AndyT wrote:
Being familiar with that type of clip hook, one accidental upward brush or catch on something it it spreads wide open dumpi g your camera 3 feet south. I wouldn't feel safe with it at all.
I agree. That particular clip/latch, is very vulnerable to accidentally being unlatched while in use.
Jun 21, 2019 10:36:44 #
Kiron Kid wrote:
I agree. That particular clip/latch, is very vulnerable to accidentally being unlatched while in use.
Didn't notice the Pelican hook which was first shown by the original post. I do not like those type for holding a camera at all!!!
Shown later on are the straps with the cabinarre (sp?) style attachment, those are much better. Those also have a screw cover that prevents it from opening accidentally.
Check to make sure the 1/4x20tpi is snug. They can become loose after a long day especially with the bracket they use on that model.
Jun 21, 2019 10:41:57 #
peterg
Loc: Santa Rosa, CA
I use two kinds of straps/attachments since I also use a tripod with an Arca-Swiss compatible clamp:
1. Peak Design belt clips. https://www.peakdesign.com/collections/clips/
2. Black Rapid and FPGear Fusion Plate. https://fpgear.com/collections/fusion-plates. These plates come in different lengths and colors.
1. Peak Design belt clips. https://www.peakdesign.com/collections/clips/
2. Black Rapid and FPGear Fusion Plate. https://fpgear.com/collections/fusion-plates. These plates come in different lengths and colors.
Jun 21, 2019 11:16:34 #
nadelewitz
Loc: Ithaca NY
Numerous folks have pointed out on UHH that camera tripod sockets are not meant or recommended for carrying the hanging, swinging weight of a camera. Unscrewing itself, pulling out the threaded insert, are two terrible possibilities.
Use a strap that attaches to the strap lugs on the body.
Use a strap that attaches to the strap lugs on the body.
Jun 21, 2019 11:22:29 #
Bazbo
Loc: Lisboa, Portugal
woodworkerman wrote:
On some occasions I like to have 2 cameras when I ... (show quote)
I have used the Black Rapid slings for years and a quite happy with hem. BR also makes a two camera sling (it more like a harness) that I use when I need two camera bodies handy.
Jun 21, 2019 11:24:45 #
peterg
Loc: Santa Rosa, CA
nadelewitz wrote:
Numerous folks have pointed out on UHH that camera tripod sockets are not meant or recommended for carrying the hanging, swinging weight of a camera. Unscrewing itself, pulling out the threaded insert, are two terrible possibilities. Use a strap that attaches to the strap lugs on the body.
Often discussed. Depends on camera/lens. Personally, I nor any of my photographer friends have ever had this problem. Like all equipment, one should regularly check all gear.
Jun 21, 2019 11:27:20 #
woodworkerman wrote:
On some occasions I like to have 2 cameras when I ... (show quote)
IMHO anything that connects by a single point of failure is begging for trouble.
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.