Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Posts for: Malco
Page: 1 2 3 4 next>>
Aug 26, 2020 12:00:56   #
bleirer wrote:
Hi All,

I will give you the big reveal about which lens is which after I get a few comments, but the gist of it is I shot the same flower using 3 different lenses all at 100mm and set to f8 1/100. The ISO was a little different because the sun came in and out a little. It is not a perfect apples to apple test because I adjusted each shot in post to get the best look to my eye, rather than doing everything exactly identically. I did turn on lens correction in lightroom for each lens.

Two of the lenses are already 'keepers' and the 3rd one I am trying out. I chose 100mm because it was the only focal length all 3 lenses had in common.

I am interested in image quality, particularly sharpness. If you could rank them from best to worst I would appreciate the feedback.
Hi All, br br I will give you the big reveal abou... (show quote)


I vote for #2
Go to
Aug 23, 2020 21:41:09   #
dickparkans wrote:
Traffic signals are vertical? Not everyplace. El Mirage, AZ and I think Texas are sideways. I'm color blind (red-green) and sometimes it is a problem. I have almost been run over by a train. All my socks are white. And most of my pants are black. I used to be an electrician before I was a photographer (for 30+ years). I learned a long time ago, if I am not sure, just ask someone.


The green light is always larger than the red light.
Go to
Aug 23, 2020 13:30:51   #
PhotoPhred wrote:
Very clever and funny. But seriously. I have something called a strap wrench, a rubber strap that is attached to the handle at one end and the loose end fits into a slot on the handle. You can adjust it to size. It also is handy to open jar lids. It resembles an oil filter wrench. Lastly, I learned a trick years ago when trying to attach a fine thread object, turn it backwards until you hear or feel a click, then rotate the object in the proper direction, in this case a lens filter. I have never had a filter get cross threaded using this technique.
Very clever and funny. But seriously. I have some... (show quote)


The problem with a strap wrench or any other kind of wrench is that holding the filter from outside of the ring distorts the ring causing the ring to become egg shaped making it more difficult to turn. The best way to remove a stuck filter is to lay the lens flat on a rubber sheet on a flat table and twist the lens CCW.
Go to
Aug 22, 2020 22:56:59   #
Scruples wrote:
This effect is called keystoning because it resembles a keystone. It is caused by parallax. Simply the lens’ first element is on a angle to a perpendicular surface. That is why buildings look as if they are falling backwards.
To correct this phenomenon, you need a Tilt-Shift lens. It will bend the image path to correct for parallax. Because Of the mechanism this lens tends to be a little more expensive than a lens of comparable focal length. I recommend renting this lens first. Playing with the lens and it’s mechanism does take some time. Using a tripod for camera and lens is a must. You will have to “jigger” the mechanism to get the effect you seek. Be Patient! It does take some time. Since I shoot Canon, I use a Rokinon 24mm Tilt Shift. It does very nicely for tall buildings in New York City and elsewhere. So I’m not sure what would work for your Nikon. I have gotten nice results with this lens for photographing model trains and street scenes. However, it is not good for macro photos of flowers or insects.

Happy Shooting!
This effect is called keystoning because it resemb... (show quote)


I do real estate photography, I use the Canon 17,t/s lens for inside and the 24 t/s for the outside shots when necessary. Neither of these lenses are auto-focus, but I don't the building is going to move anytime soon.
Go to
Aug 22, 2020 22:49:40   #
Cubanphoto wrote:
In my line of work where we rely on "visual management," I have changed the usage of the color green with blue. There are different levels of color blindness, the most prevalent, as I was told, has problem with green. If have not noticed stop lights always have red stop and green at the bottom. The color blinded can see a light but not the color green.
Google has a chart that show what a color blind person can see. I learned all of this through va co-worker who is color blind.


I am color blind, I can see the red lights fine, but the green light blends in with the street lights at night. So if I don't see any red lights I just keep going. It's a funny thing when my wife does the laundry, she has a problem separating navy blue from black socks. To me they look totally different like night and day.
Go to
Aug 22, 2020 22:40:55   #
PhotogHobbyist wrote:
I've always believed in the sledgehammer mechanic's creed, "If it doesn't work the first time get a bigger hammer." In this case substitute pipe wrench for hammer.


In the old days we called that an Italian speed wrench.
Go to
Aug 12, 2020 11:18:46   #
mg1962 wrote:
Auto ISO is for the new photographer. Imagine throwing in a roll of film and being stuck with one particular ISO for 24 or 36 shots?



That's worked fine for me for 50 yrs.
Go to
Aug 12, 2020 11:16:42   #
Steve Carlson wrote:
90% of the time I shot in manual with auto ISO. I always take a test shot of subject, look at histogram and make adjustments with aperture and shutter speed. Yesterday in LR I was making adjustments to a photograph I stood in the middle of a cloudy day and noticed ISO was went to 2500. Seems really high. Should I do more in manual ISO?


On some cameras you can limit the ISO on automatic. You didn't say what camera you are using.
Go to
Jul 18, 2020 11:45:28   #
rjrbigdog wrote:
white, black or grey. want to use in post processing. and any recommendations on what to buy and where? thanks


Studio Grey, you can throw any color gel on a background light and that will be the color of the background.
Go to
Jun 22, 2020 21:45:47   #
CHG_CANON wrote:
So you're saying the EOS 5DIV isn't a professional camera at 30MP? Or the Nikon D850 at 45MP?

The white paper for the EOS 1DXIII explained (paraphrased) that the 20MP ish size is intended for uncropped images to be used in 2-page magazine-sized prints. Of course that camera can be used for larger work and cropped as needed, but to assume the technical characteristics of only the $6000 models are the sole definition of 'professional' is a misunderstanding of the camera market.


I an not familiar with the 5D4, I have a 5D3 as a backup, it is a nice camera, but definitely not a professional camera. I an not familiar with the Nikon cameras.
Go to
Jun 22, 2020 19:50:47   #
PHRubin wrote:
Crop by 1.6 and you throw away 61% if the pixels! NOT the same!


Don't want to get into a pixel war, but most of the professional digital cameras have less pixels than consumer cameras and there are many reasons for that. One being too many pixels crowded together actually degrade the image. Pixel count is a selling point 40 mega pixels is not always better than 20. that all depends on the size of the chip
Go to
Jun 22, 2020 16:40:28   #
CHG_CANON wrote:
You're going to give up the 'reach' of the 1.6 crop factor. If you haven't handled a FF body yet, consider renting for along weekend / week and make sure this is the better direction than maybe the 90D mentioned earlier.


There is no "reach" involved all you have to do is crop the 5DMk4 to i.6 and you will have the same image. Just remember you can always get closer by cropping, but can never get further away.
Go to
May 13, 2020 12:46:46   #
Try studio gray paper, you can through a light with a gel and make it any color you want.
Go to
May 12, 2020 09:19:15   #
I am a Real Estate Broker in North and South Carolina. I do my own photography. I use a Canon 1DX Mk2 full frame and for indoor shots I use Canon TS-E 17mm f/4L for outside I use a Canon TS-E 24mm f/35L all shots are on a tripod and use available light. I also bring along a 16-35 f/2.8L and my 24-70 f/2.8L.
In every room I always use a target for color balance. Everything is shot in raw and processed in LR
Go to
Mar 10, 2020 08:46:49   #
David in Dallas wrote:
I avoid the problem by not directly importing from the SD chip into LR. I copy them into a file on my computer first and import them from there. I have full control that way.


+1
Go to
Page: 1 2 3 4 next>>
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.