Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Posts for: waegwan
Page: <<prev 1 ... 201 202 203 204 205 206 207 208 next>>
Dec 24, 2014 06:07:08   #
JimH123 wrote:
Be aware that SSDs use Flash memory and this memory is often rated at 10 years of retention. A flash memory uses a charge or lack of charge on a floating gate to determine a one or zero, or the case today, multi level cells use a specific value of charge to determine one of several states the cell can be at.

This charge will bleed away over a long period of time leaving the files unusable. Thus an SSD while a good choice for a main drive replacement is not so good of choice for long term storage.
Be aware that SSDs use Flash memory and this memor... (show quote)


That is good to know. I never considered keeping anything on a hard drive for 10 years but still good to know. Thanks.
Go to
Dec 23, 2014 08:55:26   #
Gene51 wrote:
How about the correct camera histogram?

The OP would be best advised to post a sample image, unprocessed raw - converted straight to jpg - to save a lot of second (and probably incorrect) guessing.


For sure a sample or two would be a big help in trying to help.
Go to
Dec 23, 2014 08:19:29   #
ArtzDarkroom wrote:
I will be purchasing a 70D body, in a few weeks. Do you have any suggestions for my first, primary lens?


Canon 18-200
Go to
Dec 23, 2014 08:16:51   #
Capture48 wrote:
I'm a little confused, first you said you were getting a good Histogram in camera, but the next sentence you say the LR histogram is overexposed. What are you calling good in camera? Even distribution, pushed to the right etc. A picture is worth a thousand words here.

BTW - TTL and the metering mode combination are probably going to be an issue. What metering mode are you using.


I agree, it sounds like a metering mode issue in the camera settings and maybe the wide angle panel on the light is needed.
Go to
Dec 23, 2014 08:01:16   #
Klsing wrote:
Hello everyone. I was wondering what everyone uses for photo storage that you are comfortable with?

Always concerned with losing files on a computer.

Thanks.


Just to ditto some other posts, I use a solid state hard drive back-up, the best stuff also goes on DVD and can be stored off-site at my office, some stuff can go on the cloud for off-site backup. If you have film, consider getting it digitized and store either the film or the digital copies off-site.
Go to
Dec 23, 2014 07:42:12   #
Peterff wrote:
Yes. A lot.


Cool! I'll check it out. :)
Go to
Dec 23, 2014 05:36:44   #
Brian45 wrote:
I have both the Diane Koers and the Ken McMahon books but prefer Ken's (X6) and use it with Paintshop X7.
http://www.amazon.com/PaintShop-Pro-Photographers-Ken-McMahon/dp/041574525X


Cool! I'll check it out. I jumped from x3 to x7 so I'm not sure what all was covered incrementally in between. It is good to know that x6 is still helpful with x7.
Go to
Dec 22, 2014 23:44:06   #
Cdouthitt wrote:
This is where a camera with focus peaking comes in handy. I thought canon had a firmware hack to replicate this feature (magic lantern?).

EDIT:
Yep it does. It might be a little advanced, but none the less, here is the link

http://www.magiclantern.fm


I thought Magic Lantern was just to give video to 50D. Is there more to it?
Go to
Dec 22, 2014 07:36:30   #
houdel wrote:
Can anyone direct me to good guide for Corel Paintshop Pro X7 Ultimate? I just snagged a copy from B&H on sale for $39.99 (sale ends today) and I want to get up to speed ASAP.

I had Adobe Photoshop version 4 or 5 back in the mid/late 90s, then a little later Corel Paintshop Pro X3, then most recently Photoshop Elements v9 but I never did a good job of mastering any. PSE 9 won't open the NEF RAW files for my Nikon D610 so I had to upgrade and couldn't decide between PSE 13 or Paintshop Pro X7 until I saw the sale at B&H. The new Corel Paintshop Pro X7 has a number of features I am interested in and the $50 savings was too good to pass up!
Can anyone direct me to good guide for Corel Paint... (show quote)


I pre-ordered this on Amazon. It hasn't shipped yet so I don't know if it is any good or not.

http://www.amazon.com/gp/product/1305506065/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

in case the link doesn't work the book name is:
Picture Yourself Learning Corel PaintShop Pro X7
Go to
Dec 22, 2014 07:29:16   #
Tom DePuy wrote:
I'm looking for a tripod to use with macro photography...price seems to be right for my budget...under $200.....but don't know if this is what I would need for macro....I'm open to suggestions...
Thanks Tom
http://www.bhphotovideo.com/c/product/843714-REG/Vanguard_ABEO_323AB_Abeo_283AB_Tripod_With.html


Looks like a nice rig for the money. For macro work on a budget the Dolica line might be good; they have a reversible center column as well as legs that go nearly flat. The Vanguard may have the reversible center column as well but I didn't see it in the write up.
Go to
Dec 21, 2014 09:19:49   #
I sometimes get in a situation where I am sitting about halfway back in an auditorium and my Canon 430ex II is a little weak. If I use wireless triggers and put the flash on a stand near the stage and use manual settings on the camera what is the rule of thumb for aperture settings. The flash's guide number is 141. I tried using the guide number formula from flash to stage but it was too bright and I tried it from camera to stage and it was too dark. I experimented and found the right settings somewhere in between that worked well. I was just wondering if there is a general rule for this to narrow down the experiments the next time.
Go to
Dec 21, 2014 05:56:05   #
GoofyNewfie wrote:
I miss some of the equipment from the old days!
The feel, the sound....how deliberate and thoughtful you had to be using them.
I catch myself getting lazy sometimes with a seemingly limitless image capacity.
Can't justify or afford a digital medium format camera.:cry:


I miss it too. I have three enlargers that I hold on to telling myself someday I have a place to set them up again. ;)
Go to
Dec 21, 2014 05:52:02   #
GoofyNewfie wrote:
Yep- the 80mm on the Rollei, Yashica and Mamiya twin lens medium format cameras (6x6 cm), was about equal to using a 35mm lens on the 7D. It really depends on the look you're after.
I miss my Mamiya C-330. For portraits with that camera I usually had a 135 or 180 on it. The 180mm on the Mamiya would be about the equivalent of a 105 on a full-frame camera.


Yup you're right about the 80mm on 6x6. I totally spaced that out; it has been a long time since I played with them. I still have one Yashica but I lost my 635 but I still have the 35mm kit for it somewhere. My bother had a Mamiya C330. That was a nice camera.
Go to
Dec 20, 2014 19:03:25   #
jgreco wrote:
I see that fixed lenses are different on a crop sensor camera. I was looking for a portrait lens and see that 85mm is it. My question is: would a 50mm on a crop sensor be about 65mm and an 85 be a 100mm. Or a better question is: what is a good lens for portrait on a 50D Canon crop sensor camera? I'm confused?


The 50D and 7D are 1.6 crop sensors. The 50mm will give you 80mm equivalent on either camera. 1.6X50=80, 1.6X85=136 etc. Years ago some of the most coveted portrait cameras were Rollei and Yashica TLR with fixed 80mm lens. A good 50mm f 1.4 on a 50D or 7D should work fine for portraits.
Go to
Dec 18, 2014 06:36:01   #
Gene51 wrote:
One of my students has one - its not particularly stable with long focal lengths - you might find this when you use your lens at 200mm (320mm effective focal length). For shorter focal length shots it should be fine. The camera and lens is not particularly heavy at just slightly over 3 lbs. But if you've read any of my postings on tripods, I've provided links that refute using load capacity as a criteria in selecting tripods. Better to use your own experience with a particular tripod, or purchase from a company that states performance in terms of focal length. Longer focal lengths require heftier tripods, and vice versa, regardless of weight.
One of my students has one - its not particularly ... (show quote)


Thanks Gene, this is some of the kind of info I was looking for. I fully understand the the difference between weight capacity and stability.
Go to
Page: <<prev 1 ... 201 202 203 204 205 206 207 208 next>>
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.