I tried one once to see how it worked out and I didn't much like it. It was difficult to get it on the body and it interfered with some of the controls and it looked like I had a bloated rubber camera. Lens skins, on the other hand, I use all the time.
looks as if it would be a magnet for dust, dandruff and anything flying about to get trapped
between it abd the camera body
davidrb
Loc: Half way there on the 45th Parallel
tradio wrote:
Has anyone used these protective covers and would ... (
show quote)
When you put on a coat does it "become one" with your body? As much as I dislike having to use them they are a necessity. They do get in the way, but so does your coat. Photography is all about compromises, this is just another. How do you feel about the alternative? Me neither.
If you want the protection for taking outdoors photos in inclement weather, have you considered Optec Rainsleeves? They're inexpensive and easy to use.
I gave all four my sons a package of these (stocking stuffers), and they like them a lot. They "push the buttons" right through the sleeve.
Never cared much for mine and ultimately removed it. I found it *did* attract some dirt, made finding some of the controls clumsier and, since mine had a plastic insert to cover the viewfinder, was just too clutsy.
tradio wrote:
Has anyone used these protective covers and would ... (
show quote)
I looked at them and with so many buttons and controls needing access the cover hardly covers anything. Also with the synthetic bodies digs and dents are virtually unknown today as to when the bodies were thin brass or metal. I have found them a waste for me as to coverage and ease of use of all controls. Older covers covered most the body and the back completely.
I was in The Netherlands last April and experienced several days of rain and drizzle. The Op/Tech sleeves worked fine. They are lightweight, great for travel, and inexpensive. Since I was mostly walking and hand holding they were just what I needed. The buttons and controls were easily accessible.
I use one on my 7100 for the protection when walking in the rough. I don't find a problem with the one I have but when I first put it on, it was confusing because you can't read the button function very clearly. After you learn the buttons so you don't have to read to find them, that confusion goes away. Pushing the buttons is not difficult but not as easy as just pressing an uncovered button. I wonder if taking photos in cold weather if it would not help keep internal temperature a little warmer but summer would be the counter. I would take it off after shooting in a moist condition because anything made of rubber will hold moisture if it should get under the cover. I still use my cover so I guess I do like it to some degree but it may not be for everyone.
I had one and it didn’t fit tight enough and it got the way of the operation of the camera. Took it off.
I have one on my A7Rii at the moment. It is a very good fit. It has a certain 'waltzing in work boots' clumsiness but the controls are not effected nearly as much as I would have expected. Buttons are responsive and battery door and card door are not obstructed. Getting the flash on is a little awkward, you have to pull the cover back a good bit to get the flash into the shoe. Tripod mount does not grip well. It is stable but tends to rotate. I haven't tried it with an L bracket. Overall, it adds bulk but also increases grip which is a good thing on the A7Rii with heavier lenses. It should protect against nicks and scratches, but I am a little concerned that it may cause staining or discoloration in the long term. If the camera gets wet I would definitely take the cover off and dry it thoroughly. If you make a cut in the cover at the strap brackets it would be much easier to get on and off.
I got mine on eBay for less than $10. Jury is still out, but its worth a try.
billnikon
Loc: Pennsylvania/Ohio/Florida/Maui/Oregon/Vermont
tradio wrote:
Has anyone used these protective covers and would ... (
show quote)
I never had the need for them. However, if your going somewhere where your camera is going to be bouncing off concrete, I see it as a good idea. Otherwise, why?
A friend of mine used one on his D700. I thought it was very cool, at first. However, after using it for some time my friend took the cover off and found that dirt, etc. which had worked its way between the cover and the camera abraded the camera's outside. I thought secondly about getting one for mine.
--Bob
tradio wrote:
Has anyone used these protective covers and would ... (
show quote)
jeryh
Loc: Oxfordshire UK
One simple reason why you don't see them on shoots ; they are a pain in the butt; ok if you never use your camera- otherwise, forget it !
I'd say walking threw and old submarine it's almost mandatory
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.