The colors and tones on my computer monitor are different then what come out when I print them. I have a Canon 100 pro printer and use good photo paper
SonyA580
Loc: FL in the winter & MN in the summer
Adjust your monitor to match the print.
Recommend a monitor calibration device such as Spyder. Prior to calibration each of the two monitors showed the photos much differently, the colors were different. We were amazed how much our monitors changed when we calibrated them.
Welcome to UHH. You might get some useful advice by posting your question on UHH's "Printers and Color Printing Forum" which you can access by clicking on the "All Sections" link at the bottom of this page. While you are scrolling down the list, take note of the many other resources available to you at UHH.
Gene51
Loc: Yonkers, NY, now in LSD (LowerSlowerDelaware)
Mike57 wrote:
The colors and tones on my computer monitor are different then what come out when I print them. I have a Canon 100 pro printer and use good photo paper
They will never match.
But you can get really close if you profile your display. I suggest an Xrite i1 Display Pro - great software, enough granularity, accurate color results. Use Canon ink and paper and you should be able to bypass the printer profile part. If you use someone else's paper, then make sure you can download a profile for the paper on your printer. Or get a profiling tool that will create a printer profile.
Read up on monitor calibration and ICC color profiles for your printer paper.
cjc2
Loc: Hellertown PA
First Step is to calibrate your monitor and for that you will need a device such as a Spyder or Xrite. Second step is to get and use the proper profile for your paper and ink. Third step, and the one many folks forget about that will produce poor prints, is to MAKE SURE you are only performing color correction once. Software correction is the correct choice as opposed to printer-based correction when using the method I mentioned. Takes a while to get this straight, but when you do, you will get awesome results! Best of luck.
cjc2 sums the process up very nicely. If you follow that approach you will be getting some very nice results.
ecurb1105 wrote:
Read up on monitor calibration and ICC color profiles for your printer paper.
Right on Search UHH many Topics about this subject
Mike57 wrote:
The colors and tones on my computer monitor are different then what come out when I print them. I have a Canon 100 pro printer and use good photo paper
Calibrate your monitor and let the printer manage the printing.
JCam
Loc: MD Eastern Shore
alolewis wrote:
Recommend a monitor calibration device such as Spyder. Prior to calibration each of the two monitors showed the photos much differently, the colors were different. We were amazed how much our monitors changed when we calibrated them.
I only calibrated my 27" monitor and left the laptop not calibrated; I was and still amazed at the differences in color!
Mike, calibrate your monitor and make sure the color profile of the images you are outputting matches the color profile the printer is expecting to see.
--Bob
Mike57 wrote:
The colors and tones on my computer monitor are different then what come out when I print them. I have a Canon 100 pro printer and use good photo paper
TriX
Loc: Raleigh, NC
And after calibrating your monitor and downloading the profile of your outside printing service or your paper if doing your own printing, take the final step and enable soft proofing in your post processing application.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.