Well, thought I'd post this: Normally, when done shooting with my speedlite, I remove the batteries. Well, for some reason, I didn't the last time and went to use my SB-600 yesterday and when I went to install batteries, realized that I had never removed them from the last shoot. One was already corroded and the light would not function. Removed all four batteries and tried the eraser method on the contacts, etc. This did not work. Finally went to the kitchen and got the wife's bottle of apple vinegar. With a cotton swab (cu-tip), I gently cleaned the contacts, both inside the holder and externally. Then used another swab and used rubbing alcohol to remove the vinegar residue. Left lid open and air dried. Re-installed new batteries and all worked again. This time, removed the new batteries for the next shoot.
In posting this, I hope it will help someone remember to remove the batteries afterwards and if not, hopefully a way to fix the speedlite if something like this should happen to you.
Good advice, thanks for that, having just bought a speedlight I hadn't even thought about removing the batteries when not being used for a while.
juicesqueezer wrote:
Well, thought I'd post this: Normally, when done shooting with my speedlite, I remove the batteries. Well, for some reason, I didn't the last time and went to use my SB-600 yesterday and when I went to install batteries, realized that I had never removed them from the last shoot. One was already corroded and the light would not function. Removed all four batteries and tried the eraser method on the contacts, etc. This did not work. Finally went to the kitchen and got the wife's bottle of apple vinegar. With a cotton swab (cu-tip), I gently cleaned the contacts, both inside the holder and externally. Then used another swab and used rubbing alcohol to remove the vinegar residue. Left lid open and air dried. Re-installed new batteries and all worked again. This time, removed the new batteries for the next shoot.
In posting this, I hope it will help someone remember to remove the batteries afterwards and if not, hopefully a way to fix the speedlite if something like this should happen to you.
Well, thought I'd post this: Normally, when done ... (
show quote)
From the numerous reports I have read this appears to be a common problem especially with alkaline. I use rechargeable NiMH and remove them always when not in use.
Very good information. Thanks for posting.
Madman
Loc: Gulf Coast, Florida USA
juicesqueezer wrote:
Well, thought I'd post this: Normally, when done shooting with my speedlite, I remove the batteries. Well, for some reason, I didn't the last time and went to use my SB-600 yesterday and when I went to install batteries, realized that I had never removed them from the last shoot. One was already corroded and the light would not function. Removed all four batteries and tried the eraser method on the contacts, etc. This did not work. Finally went to the kitchen and got the wife's bottle of apple vinegar. With a cotton swab (cu-tip), I gently cleaned the contacts, both inside the holder and externally. Then used another swab and used rubbing alcohol to remove the vinegar residue. Left lid open and air dried. Re-installed new batteries and all worked again. This time, removed the new batteries for the next shoot.
In posting this, I hope it will help someone remember to remove the batteries afterwards and if not, hopefully a way to fix the speedlite if something like this should happen to you.
Well, thought I'd post this: Normally, when done ... (
show quote)
I'm going to hazard a guess that if your batteries leaked it's because you are using alkalines.
I quit using them decades ago in favor of rechargeables. I now use NiMH. One reason is the safety factor; never had or saw one leak. Another reason is quicker recycle time and third, lower cost in the long run.
However, I still recommend that you remove batteries when the equipment will not be used to prevent the contacts from fatiguing.
I would not suggest using vinegar to clean anything electronic. It is an acid and any residue will cause corrosion on it's own. WD40 is a safer choice or Contact Cleaner.
Thanks for your post. I pretty much always leave the batteries in unless I am not planning on using something for a long time. You prompted me to rethink this practice. ;)
FWIW I have eneloop rechargeables in my SB600 for years and have never had any corrosion. They hold their charge very well too.
juicesqueezer wrote:
Well, thought I'd post this: Normally, when done shooting with my speedlite, I remove the batteries. Well, for some reason, I didn't the last time and went to use my SB-600 yesterday and when I went to install batteries, realized that I had never removed them from the last shoot. One was already corroded and the light would not function. Removed all four batteries and tried the eraser method on the contacts, etc. This did not work. Finally went to the kitchen and got the wife's bottle of apple vinegar. With a cotton swab (cu-tip), I gently cleaned the contacts, both inside the holder and externally. Then used another swab and used rubbing alcohol to remove the vinegar residue. Left lid open and air dried. Re-installed new batteries and all worked again. This time, removed the new batteries for the next shoot.
In posting this, I hope it will help someone remember to remove the batteries afterwards and if not, hopefully a way to fix the speedlite if something like this should happen to you.
Well, thought I'd post this: Normally, when done ... (
show quote)
Thanks for that. I hate it when I pick up a flash I haven't used in a while, and it's heavy. I try to remember to remove the batteries when I'm done, but I don't always know when I'm completely done.
I have had Energizer Ultimate Lithium (non-rechargable) in my 430EXII for about 2 1/2 yrs now. I never take them out. Can't seem to wear them out either. Never even checked or replaced them before going on vacation a few weeks ago. Just stuck the flash in my bag. Took a whole bunch of interior shots of the USS Missouri with no problem. It still test fires and recycles as quickly as when I first put them in. I've never used a rechargable that lasts as long as these things have.
LFingar wrote:
Can't seem to wear them out either.
You're not flashing enough. :D
jerryc41 wrote:
You're not flashing enough. :D
I gave that up years ago! :lol:
juicesqueezer wrote:
Well, thought I'd post this: Normally, when done shooting with my speedlite, I remove the batteries. Well, for some reason, I didn't the last time and went to use my SB-600 yesterday and when I went to install batteries, realized that I had never removed them from the last shoot. One was already corroded and the light would not function. Removed all four batteries and tried the eraser method on the contacts, etc. This did not work. Finally went to the kitchen and got the wife's bottle of apple vinegar. With a cotton swab (cu-tip), I gently cleaned the contacts, both inside the holder and externally. Then used another swab and used rubbing alcohol to remove the vinegar residue. Left lid open and air dried. Re-installed new batteries and all worked again. This time, removed the new batteries for the next shoot.
In posting this, I hope it will help someone remember to remove the batteries afterwards and if not, hopefully a way to fix the speedlite if something like this should happen to you.
Well, thought I'd post this: Normally, when done ... (
show quote)
I never remove batteries from my speedlights between uses...they've never showed a hint of corrosion.
Not sure why yours did.
I use Eneloops.
Madman
Loc: Gulf Coast, Florida USA
rpavich wrote:
I never remove batteries from my speedlights between uses...they've never showed a hint of corrosion.
Not sure why yours did.
I use Eneloops.
You should not see any corrosion from them. They are a NiMH rechargeable battery developed by Sanyo and now marketed under the Panasonic brand. I use the equivalent battery made by Watson, but I also have some other brands.
I agree, Eneloops are great batteries.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.