[quote=gvarner]I often allow space around subject so I can crop and level in post production (photoshop) David
Swamp Gator wrote:
It is a very common thing.
Don't know if your camera has it, but check in the settings and see if you can select an option to display a grid right on your viewfinder.
That way, when taking the photo, you can make sure your image is level by lining up a horizon aspect with the appropriate grid line.
The grid helps for sure. I always have it on. It is most important to pay attention to it.
Sometimes I align a vertical (e.g. tree) and sometimes a horizontal (e.g. building roof line or horizon), depending on the image.
Some cameras have other level aids. My Nikon can show little arrows and my Sony a level. But I don't use them often because the grid helps me get close enough most of the time that at most a slight tweak in Lightroom fixes it up.
Al Beatty wrote:
Hi gvarner,
If you think the "grid" would be helpful go to d2 page 216 in your D7000 manual for information (that's where I found it in my manual). Take care & ...
BTW, my gripe with Nikon's grid is that they seem to like a "rule of fourths"; i.e. three lines in each dimension, instead of using the "rule of thirds", like my Sony does. I guess Nikon isn't into photography as much.
gvarner wrote:
I've noticed that most all of my pics have a 10° tilt to them because I'm holding the camera lower on the right than the left. Is this a common thing, a characteristic of not holding the camera level in the first place, poor technique? What's a good way to overcome it? I'm thinking check for plumb or level against a vertical item in the frame. Maybe move the frame edge close to a vertical or level item to double check. It seems that I just have a natural tendency to frame things out of kilter. When I bring the camera up it seems like everything looks right in the viewfinder but the end result says otherwise. Don't want to have to always use live view with the level option in view. I have a D7000 and 18-200 DX. Your advise would be appreciated. Thanks.
I've noticed that most all of my pics have a 10° t... (
show quote)
Download Picassa 3 they have an app to straighten photos, very easy.
When you are taking the picture lean to look for something vertical and make sure it is parallel to the side of the frame
Stan
As I do so much architectural photography, I am a perfectionist about getting the images level. BUT, even though I use the grid in the viewfinder, 95% of my architectural images require straightening in post processing. Seems I am almost always off a degree or more. For many subjects, leveling is not important though.
Bozsik
Loc: Orangevale, California
RicknJude wrote:
Try taking one shoe off. :lol:
Or high heel on one side. Actually Swampgator had the best suggestion. The first thing I set on a new camera when I get on is the grid display. It is useful for architecture and horizon lines. Also great with wide angle lens and structures.
gvarner wrote:
I've noticed that most all of my pics have a 10° tilt to them because I'm holding the camera lower on the right than the left. Is this a common thing, a characteristic of not holding the camera level in the first place, poor technique? What's a good way to overcome it? I'm thinking check for plumb or level against a vertical item in the frame. Maybe move the frame edge close to a vertical or level item to double check. It seems that I just have a natural tendency to frame things out of kilter. When I bring the camera up it seems like everything looks right in the viewfinder but the end result says otherwise. Don't want to have to always use live view with the level option in view. I have a D7000 and 18-200 DX. Your advise would be appreciated. Thanks.
I've noticed that most all of my pics have a 10° t... (
show quote)
Try this link...
http://www.amazon.com/Altura-Photo-MagicFiber-Microfiber-Cleaning/dp/B0045DIO6A/ref=sr_1_6?ie=UTF8&qid=1404752209&sr=8-6&keywords=hot+shoe+levelAlso you might have something in your menu that shows a horizontal bar or even a 1/3 grid. It would put it in your live view.
I know my 7100 has it and I think my old D90 did as well.
Strangely enough, I used to have more issues when using my old viewfinder camera; I was more concerned with what I was seeing than how I was holding the camera. Cameras with displays, held further away from one's body, do allow you to see the camera as well as the subject. Having said that however, I still like viewfinders because I take many outdoor photos.
Get a tripod that has a quick release platform with a bubble level. Leave the platform on the camera - it will also make setting up on the tripod much faster.
LFingar wrote:
Oh great! Now you make an offer like that! Where were you when I had that problem with my Canon? :-(
Probably because he was out of loose change :)
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.