Tripod Release Plates
Dec 15, 2011 18:12:51 #
Dave Clark Photography wrote:
Just search for Arca Swiss plates in the Camera and photo caterory. I purchased both ball heads that already had arca swiss mounts, just plates, and new base plates to change out on my exsisting ball heads. It all started because I bought a gimbal head with an arca swiss mount. You will also have to search for arca swiss ball heads to get the other side and there are some combination sets as well.
Have fun.
Have fun.
Since I don't have any Arca Swiss equipment now, I would have to buy a plate to mount on top of my tripod and ball head, correct?
I understand that I can buy Arca release plates, but what do I look for to attach the release plate to?
Dec 15, 2011 19:09:46 #
Yes I had to do that on some of mine. If you search the previous mentioned searches you will find all that you need. Pay attention to the thread size on yor tripod base if you decide to change ball head and all or the tread size on the ball head if just changing the quick release plate.
Dec 15, 2011 19:23:56 #
Old Timer
Loc: Greenfield, In.
I have made several plates for tripods, and found the best material is plexsan or plexiglas which you can buy at most box hardware stores. I use the 1/4 thick and it is easy to work with, and more durable than plywood. I counter drill it and use with counter sink bolts 1/4 20 at the proper length. I have mono pod that I leave in my truck made of pcv and using a 1/4 20 screw that I carry with me at all times. If you want pics pm me.
Dec 15, 2011 19:24:59 #
You might find a better selection on [www.shopzilla.com] and just search for arca swiss. they have some good combinations. Dave
Dec 16, 2011 06:17:29 #
Dave Clark Photography wrote:
You might find a better selection on [www.shopzilla.com] and just search for arca swiss. they have some good combinations. Dave
I have a Vanguard Tracker 4 tripod witha GH-100 lever ballhead. If I wanted to use Arca plates, I'd have to put an Arca-type mount on the tripod/ballhead and then get Arca release plates, correct?
Dec 16, 2011 10:25:44 #
That is correct you just have to match up thread sizes most have adapters so the will work with both the comon sizes.
Dec 16, 2011 10:51:11 #
Dave Clark Photography wrote:
That is correct you just have to match up thread sizes most have adapters so the will work with both the comon sizes.
Thanks for the info. I think that for the expense involved, I'll stick with my two styles of release plates.
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.