Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
HDR Photography -- Before and After
Melbourne GPO Columns
Page 1 of 2 next>
May 11, 2013 21:33:30   #
andrew.haysom Loc: Melbourne, Australia
 
A seven-exposure Photomatix merge of the columns out front of the Melbourne GPO building in Elizabeth Street, Melbourne



Reply
May 11, 2013 22:14:28   #
Nikonian72 Loc: Chico CA
 
Very nice HDR! Now define GPO.

Reply
May 12, 2013 03:09:52   #
andrew.haysom Loc: Melbourne, Australia
 
Nikonian72 wrote:
Very nice HDR! Now define GPO.

Sorry about that, we IT guys use far too many acronyms in our work, it's spilling over into hobbies as well. GPO is General Post Office, this beautiful old building used to be Melbourne's main Post Office but is now offices, restaurants and shops.

Reply
 
 
May 12, 2013 05:13:11   #
amersfoort
 
That's a neat shot.

Was it taken early in the morning? I thought there were tables from cafes along that route.

Reply
May 12, 2013 05:16:28   #
andrew.haysom Loc: Melbourne, Australia
 
amersfoort wrote:
That's a neat shot.

Was it taken early in the morning? I thought there were tables from cafes along that route.


You're right there are cafe tables in there during the day. This shot was taken at about midnight, at the end of a photo walk with my friend Dave.

Reply
May 12, 2013 08:08:03   #
LoneRangeFinder Loc: Left field
 
andrew.haysom wrote:
A seven-exposure Photomatix merge of the columns out front of the Melbourne GPO building in Elizabeth Street, Melbourne


Very nice control of perspective and the light is wonderful. To nit-pick: That small bit of pink (reflected light from another source?) on the top left is a distraction for my "roving eye".

But it is a well-executed beautiful image

Reply
May 12, 2013 11:26:19   #
SoHillGuy Loc: Washington
 
You have great control of noise, dof, and clarity as usual. A very nice photo as already stated by our UHH friends. Those aren't ghost walking the halls at Midnight, it is Andrew.

Reply
 
 
May 12, 2013 20:25:56   #
Kimbee Loc: Dunedin, Florida, USA
 
Beautifully done!

Reply
May 12, 2013 20:37:56   #
Tom DePuy Loc: Waxhaw, N.C.
 
very nice!

Reply
May 13, 2013 04:00:55   #
conkerwood
 
Andrew, you make it difficult for picky people like me, so few nits to pick. Superb DOF, subject, control of light etc etc. And the colour is gorgeous. I do agree about the pink light but I guess thats what there is so thats what you get. My only thoughts are as usual about distortions. If you zoom right into the back to the doorway and also have a look at the levels across the top of the pillars the horizontal is marginally off but only to people like me who look very carefully. The verticals are pretty good but the second set of columns from the front on the right show a little curvature and are slightly off vertical. In short, very very tiny nits for an outstanding pic.

Peter

Reply
May 13, 2013 10:35:50   #
LoneRangeFinder Loc: Left field
 
conkerwood wrote:
Andrew, you make it difficult for picky people like me, so few nits to pick. Superb DOF, subject, control of light etc etc. And the colour is gorgeous. I do agree about the pink light but I guess thats what there is so thats what you get. My only thoughts are as usual about distortions. If you zoom right into the back to the doorway and also have a look at the levels across the top of the pillars the horizontal is marginally off but only to people like me who look very carefully. The verticals are pretty good but the second set of columns from the front on the right show a little curvature and are slightly off vertical. In short, very very tiny nits for an outstanding pic.


Peter
Andrew, you make it difficult for picky people lik... (show quote)


I was hoping you had a solution for the pink light!

Reply
 
 
May 13, 2013 14:31:40   #
Samuraiz Loc: Central Florida
 
Very Very Nice.

Reply
May 13, 2013 18:29:16   #
hminn Loc: Portage, Michigan
 
andrew.haysom wrote:
A seven-exposure Photomatix merge of the columns out front of the Melbourne GPO building in Elizabeth Street, Melbourne


Andrew, your work is awesome.

Reply
May 13, 2013 20:48:49   #
conkerwood
 
LoneRangeFinder wrote:
I was hoping you had a solution for the pink light!


I do actually and its quite simple but I was being a bit lazy and I didn't want to sound like I was being too picky because its a fantastic pic. I used PS but it works just as well in Elements. Firstly go to the colour picker and set your foreground colour to the colour you want. I just chose a bit off the left hand wall from Andrew's pic. Then do a big selection around the pink area and plenty of overlap into the wall area. The go to Image>Adjustments>Hue and Saturation. Then click 'Colourise'. Adjust the saturation and darkness sliders until you get the pink area looking how you want. Don't worry about any overlap areas being messed up at this stage. Then create a layer mask set to 'Hide All' select a soft brush at 100% and paint in the new colour over the pink. Ends up perfectly coloured and you cannot pick it as being recoloured as it retains all of the original surface structure which of course cloning would have removed.

Hope this makes sense, let me know if you need more details.

Peter

Reply
May 13, 2013 21:42:20   #
LoneRangeFinder Loc: Left field
 
conkerwood wrote:
I do actually and its quite simple but I was being a bit lazy and I didn't want to sound like I was being too picky because its a fantastic pic. I used PS but it works just as well in Elements. Firstly go to the colour picker and set your foreground colour to the colour you want. I just chose a bit off the left hand wall from Andrew's pic. Then do a big selection around the pink area and plenty of overlap into the wall area. The go to Image>Adjustments>Hue and Saturation. Then click 'Colourise'. Adjust the saturation and darkness sliders until you get the pink area looking how you want. Don't worry about any overlap areas being messed up at this stage. Then create a layer mask set to 'Hide All' select a soft brush at 100% and paint in the new colour over the pink. Ends up perfectly coloured and you cannot pick it as being recoloured as it retains all of the original surface structure which of course cloning would have removed.

Hope this makes sense, let me know if you need more details.

Peter
I do actually and its quite simple but I was being... (show quote)


It does. I don't have your skills/experience-- so I would probably opt to leave it as is. As you say, it's a fine image without the fix. Sometimes, I think I'm more easily distracted than the general populace

Reply
Page 1 of 2 next>
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
HDR Photography -- Before and After
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.