Xtreme66 wrote:
Well, after a very long internal debate I finally took the leap and ordered the D7000 . I currently shoot with the D3100 and D50, and after reading about a million posts and reviews and comparing it's features against the new D5200, I decided that the more professional features that the D7000 offers over the D5200 will make it the ideal body for what I'm interested in doing. I should have it by next Wednesday. I'm already studying the manual and watching the videos in it, but if anybody has any hands-on tips or tricks that aren't widely published, I'd love to hear them.
Thanks in advance...
Well, after a very long internal debate I finally ... (
show quote)
I make little six-sided laminated tips cards for my cameras so I can make adjustments when I'm out shooting. Below is the text from my D7000 card.
Nikon D7000
Active D-Lighting In P, S, A, M. Good for shadows. Menu > Shooting > Active D-Lighting. Choose.
Focus: AE-L Set meter to (.) or . Put subject in focus point, press shutter halfway, and press AE-L.
AF Area Press the AF button, and rotate the Sub Command Dial. You can choose which focusing points the camera will use. 9-point gives faster focus than 21 or 39-point.
AF Mode Set switches on camera and lens. Press the autofocus button and rotate the Command Dial (rear).
AF-A Good choice. Camera
selects AF-S or AF-C, as needed.
AF-C Camera will focus on action and take picture when shutter button is pressed, regardless of focus.
AF-S Focuses then locks.
AF Point Have the AF not set to Auto. Move the multi-control to relocate the focusing spot.
Bracketing Custom Menu > Bracketing > e5 > set type > exit Menu. Hold BKT and rotate Command Dial to set # of frames and Sub Command to set exposure difference if set to AE Only.
Double Exposure Menu > Shooting Menu > Mult Exp On
Exposure Compensation In P, S, or A modes, press the +/- square top right and rotate the Command Dial. This remains until reset.
Flash Press Flash button and rotate Command Dial.
Rear Flash fires at end of exposure, producing streaks behind moving subject. In P and A, you also get a slow shutter. In M and S, you must set shutter speed.
Slow Sync Slower shutter to brighten background.
Flash Compensation Adjust flash power by pressing the Flash button and turning the Sub Command Dial. This remains until reset.
Fv Lock Locks flash output on the subject. Assign Fv to Fn by going to f3. With flash up, focus on the subject, press shutter halfway, and press Fn to lock flash output. Recompose, take picture, press Fv again.
Image Quality Press Qual and rotate the Command Dial for Basic, Norm, Fine, RAW.
Image Size Press Qual and rotate the Command and Sub Command Dial for L , M, or S; Basic, Norm, Fine, RAW.
Interval Shooting Menu > Interval. Select Now or Start Time. Move the Multi-Selector right and make your choices. Press right again to get to the choices. Press right again to get to the Start screen and select On.
ISO Press the ISO button, left
rear, and rotate the Command Dial.
Long Exposures Rotate dial to M. Set shutter speed to bulb wiith the Command Dial, or Timer with the Release Dial.
Metering Mode Press the rectangular metering icon, top right, and rotate the Command Dial. Rectangle = Matrix; (.) = Center; . = Spot
Movie Rotate the Lv lever and push the red dot to turn on/off.
Multiple Exposures Menu > Shooting > Mult Exp > On
My Menu Menu > My Menu > select and add items
Interval Menu > Shooting > Interval. Set options.
Release Mode Press the small
black release button, top left, and rotate the dial. S = single; Cl = continuous low speed; Ch
= continuous high speed; Q = quiet; Clock = timer; Remote icon = remote; Mup = mirror lock up.
Restore Default Hold two green
dot on rear back.
Retouch Menu > Retouch Menu > select.
Scene Mod Turn dial to Scene and rotate Command Dial to select the scene in the monitor.
White Balance Press/hold WB button, rotate Command Dial.
quote=Xtreme66 Well, after a very long internal d... (