Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Main Photography Discussion
Best Photo Prints
Page <<first <prev 3 of 3
Jun 16, 2021 17:26:57   #
Vince68 Loc: Wappingers Falls, NY
 
shieldsadvert wrote:
I am looking for recommendations for the best lab for photo prints without regard to price.


I have used both Bay Photo and Mpix. Both do great work and I will continue to use both of them.

Also... I have done prints on paper, canvas, and metal, and all have been great.

Reply
Jun 16, 2021 18:12:21   #
TriX Loc: Raleigh, NC
 
shieldsadvert wrote:
Thanks for the info. I have a 27" iMac and people say it doesn't need to be color corrected. Is this true?


No.

Reply
Jun 16, 2021 19:09:43   #
burkphoto Loc: High Point, NC
 
shieldsadvert wrote:
Thanks for the info. I have a 27" iMac and people say it doesn't need to be color corrected. Is this true?


All monitors need calibration and profiling. As good as that P3-capable monitor is, it is still subject to drift.

1) Turn off auto brightness and the auto “night shift” to a warm color balance. Do this before calibration and before any image editing session.

2) Calibrate and profile, using a kit from X-Rite or Datacolor.

Keep brightness moderate if you print. Typical photo lab aims, set in software used to calibrate:

> Gamma 2.2
> Black Level 0.5 candelas per square meter
> White Level 105 cd/m^2, +/— 15
> Color temperature set as software recommends (usually 5800K to 6500K).

Reply
 
 
Jun 16, 2021 20:06:02   #
Nikon1201
 
In Central Florida I use Ford Press.

Reply
Jun 17, 2021 00:49:00   #
chasgroh Loc: Buena Park, CA
 
WJB wrote:
Thank you ricardo00-I've been wondering about this for some. These folks look like they would be terrific.
Bill


...they are!

Reply
Jun 17, 2021 11:07:20   #
shieldsadvert
 
burkphoto wrote:
All monitors need calibration and profiling. As good as that P3-capable monitor is, it is still subject to drift.

1) Turn off auto brightness and the auto “night shift” to a warm color balance. Do this before calibration and before any image editing session.

2) Calibrate and profile, using a kit from X-Rite or Datacolor.

Keep brightness moderate if you print. Typical photo lab aims, set in software used to calibrate:

> Gamma 2.2
> Black Level 0.5 candelas per square meter
> White Level 105 cd/m^2, +/— 15
> Color temperature set as software recommends (usually 5800K to 6500K).
All monitors need calibration and profiling. As go... (show quote)


Thank you; good information.

Reply
Page <<first <prev 3 of 3
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Main Photography Discussion
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.