Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Check out Smartphone Photography section of our forum.
Main Photography Discussion
Best Photo Prints
Page <<first <prev 3 of 3
Jun 16, 2021 17:26:57   #
Vince68 Loc: Wappingers Falls, NY
 
shieldsadvert wrote:
I am looking for recommendations for the best lab for photo prints without regard to price.


I have used both Bay Photo and Mpix. Both do great work and I will continue to use both of them.

Also... I have done prints on paper, canvas, and metal, and all have been great.

Reply
Jun 16, 2021 18:12:21   #
TriX Loc: Raleigh, NC
 
shieldsadvert wrote:
Thanks for the info. I have a 27" iMac and people say it doesn't need to be color corrected. Is this true?


No.

Reply
Jun 16, 2021 19:09:43   #
burkphoto Loc: High Point, NC
 
shieldsadvert wrote:
Thanks for the info. I have a 27" iMac and people say it doesn't need to be color corrected. Is this true?


All monitors need calibration and profiling. As good as that P3-capable monitor is, it is still subject to drift.

1) Turn off auto brightness and the auto “night shift” to a warm color balance. Do this before calibration and before any image editing session.

2) Calibrate and profile, using a kit from X-Rite or Datacolor.

Keep brightness moderate if you print. Typical photo lab aims, set in software used to calibrate:

> Gamma 2.2
> Black Level 0.5 candelas per square meter
> White Level 105 cd/m^2, +/— 15
> Color temperature set as software recommends (usually 5800K to 6500K).

Reply
 
 
Jun 16, 2021 20:06:02   #
Nikon1201
 
In Central Florida I use Ford Press.

Reply
Jun 17, 2021 00:49:00   #
chasgroh Loc: Buena Park, CA
 
WJB wrote:
Thank you ricardo00-I've been wondering about this for some. These folks look like they would be terrific.
Bill


...they are!

Reply
Jun 17, 2021 11:07:20   #
shieldsadvert
 
burkphoto wrote:
All monitors need calibration and profiling. As good as that P3-capable monitor is, it is still subject to drift.

1) Turn off auto brightness and the auto “night shift” to a warm color balance. Do this before calibration and before any image editing session.

2) Calibrate and profile, using a kit from X-Rite or Datacolor.

Keep brightness moderate if you print. Typical photo lab aims, set in software used to calibrate:

> Gamma 2.2
> Black Level 0.5 candelas per square meter
> White Level 105 cd/m^2, +/— 15
> Color temperature set as software recommends (usually 5800K to 6500K).
All monitors need calibration and profiling. As go... (show quote)


Thank you; good information.

Reply
Page <<first <prev 3 of 3
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Check out Black and White Photography section of our forum.
Main Photography Discussion
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.