Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Main Photography Discussion
How often should you clean your camera and sensors
Page <<first <prev 3 of 6 next> last>>
Sep 28, 2020 17:32:38   #
billnikon Loc: Pennsylvania/Ohio/Florida/Maui/Oregon/Vermont
 
JD750 wrote:
That is a silly statement as DSLRs can have IBIS as well. Any system with IBIS will require more caution when cleaning. There is a process that must be followed.

And my experience with mirrorless (since circa 2005) is they need much much less cleaning. There are variables of course, lens changing hygiene being a big one. So YMMV. But with mirrorless there is no mirror fanning the air and Stirring up dust and flipping oil everywhere. My DSLRs sensors need cleaning a LOT more often than my mirrorless cameras.
That is a silly statement as DSLRs can have IBIS a... (show quote)


Mirrorless are more prone to sensor dust than DSLR's

Reply
Sep 28, 2020 17:38:52   #
drrobins Loc: San Francisco East Bay (Walnut Creek)
 
Pixel-pusher wrote:
All of the previous comments are excellent.

However; I own seven bodies ranging from D300 to D850. I have a lens change technique I used on a nuclear submarine and none of my cameras have ever needed cleaning!
[The camera's innards & the rear lens element are only exposed to the air for a maximum of three seconds.]

(If necessary take a soft lint free rag from my pocket and place it on a suitable surface)

Place the camera on its back, push the lens release button and rotate but DO NOT remove the lens.

Take the new lens, place it face down next to the camera or (if necessary, between my legs) and and rotate but DO NOT remove the lens cap.

Lift the lens from the camera body and transfer the rear lens cap from the new lens onto the old, set the old lens down and install the new lens onto the camera.

I must admit that this technique would not be suitable during dust storms in the Sahara or in burning buildings.
All of the previous comments are excellent. br br... (show quote)


I do almost the same, with one exception: rather than face the camera up at the start, I handle it such that the camera never faces up. The old lens is removed facing almost fully downwards, and the new lens is attached just angling the camera up enough to see how you are attaching the lens.

The less the camera is facing up, less chance of dust settling in. Excepting airborne eddy carrying dust.

That's "how I was trained ..."

Reply
Sep 28, 2020 17:48:01   #
Architect1776 Loc: In my mind
 
Pixel-pusher wrote:
All of the previous comments are excellent.

However; I own seven bodies ranging from D300 to D850. I have a lens change technique I used on a nuclear submarine and none of my cameras have ever needed cleaning!
[The camera's innards & the rear lens element are only exposed to the air for a maximum of three seconds.]

(If necessary take a soft lint free rag from my pocket and place it on a suitable surface)

Place the camera on its back, push the lens release button and rotate but DO NOT remove the lens.

Take the new lens, place it face down next to the camera or (if necessary, between my legs) and and rotate but DO NOT remove the lens cap.

Lift the lens from the camera body and transfer the rear lens cap from the new lens onto the old, set the old lens down and install the new lens onto the camera.

I must admit that this technique would not be suitable during dust storms in the Sahara or in burning buildings.
All of the previous comments are excellent. br br... (show quote)


Many times this is impractical.
Also I as much as possible keep the camera opening face down as dirt. Lint, hair etc. does not generally fall up.
Then get the new lens ready and take the mounted off and quickly put the new lens on. Then cap the lens just taken off and you are quickly ready to go.

Reply
 
 
Sep 28, 2020 17:52:00   #
JBGLADSTONE Loc: Oregon
 
I was told " When changing lens, always turn off the camera AND point the camera down."
Reasons is the sensors is still charged when the lens is remove(I Think)
and

by point the camera down is a much better chance of keeping dust out of the camera.

Reply
Sep 28, 2020 18:17:51   #
Architect1776 Loc: In my mind
 
JBGLADSTONE wrote:
I was told " When changing lens, always turn off the camera AND point the camera down."
Reasons is the sensors is still charged when the lens is remove(I Think)
and

by point the camera down is a much better chance of keeping dust out of the camera.



Reply
Sep 28, 2020 20:53:23   #
Toment Loc: FL, IL
 
Michael S wrote:
Last year I purchased a Nikon 7500. As part of the dealers warranty package I get 3 free cleanings. The warranty package is over a 3 year period. How often should I get the camera cleaned. Also how should I handle lens. Thank you.

Clean it when it needs it with care of course.
Professionally if you aren’t up to it
Have fun

Reply
Sep 28, 2020 21:44:04   #
Larry Powell Loc: Columbus OH
 
Is such an annoying reply necessary?

Reply
 
 
Sep 28, 2020 22:50:06   #
Foto Fun
 
Those hostels can very hostile.

Sorry.

Reply
Sep 28, 2020 23:51:42   #
Real Nikon Lover Loc: Simi Valley, CA
 
Michael S wrote:
Last year I purchased a Nikon 7500. As part of the dealers warranty package I get 3 free cleanings. The warranty package is over a 3 year period. How often should I get the camera cleaned. Also how should I handle lens. Thank you.


Reading through the thread, I agree that you should only clean when necessary. A couple of minor dust spots won't necessarily ruin a photo, but it is frustrating if you are trying to capture the best image possible. I use the Aurora brand cleaning swabs with an electronic magnifying scope to view the sensor. I have cleaned my D810 and D850 with absolutely flawless results. Very happy with that product and have also used VSGO brand with same good results. Here is the link to Aurora.

https://jcristina.com/product/acc-apsc/?v=1d20b5ff1ee9

Reply
Sep 29, 2020 02:02:28   #
JD750 Loc: SoCal
 
brooklyn-camera I wrote:
Guess that means never outdoors? Shooting from the side lines in sports at times I must change a lens and that's it.


Seems like you have just justified buying more camera bodies.

Reply
Sep 29, 2020 02:06:01   #
JD750 Loc: SoCal
 
JBGLADSTONE wrote:
I was told " When changing lens, always turn off the camera AND point the camera down."
Reasons is the sensors is still charged when the lens is remove(I Think)
and by point the camera down is a much better chance of keeping dust out of the camera.


I have heard about the sensor “charge” I would like to see a study or report on that.

The reason for pointing it down is dust particles normally don’t fall up.

Reply
 
 
Sep 29, 2020 02:08:26   #
JD750 Loc: SoCal
 
billnikon wrote:
Mirrorless are more prone to sensor dust than DSLR's


My experience using mirrorless since 2005 is exactly the opposite of what you say. YMMV.

Reply
Sep 29, 2020 06:06:16   #
hobbit123 Loc: Brisbane, Australia
 
Jack47 wrote:
The OP has stated that he gets three free cleanings over a three year warranty. Why not get a cleaning at the end of every year? They’re free.


As usual the most sensible answer gets overlooked.

Reply
Sep 29, 2020 07:40:49   #
coolhanduke Loc: Redondo Beach, CA
 
Michael S wrote:
Last year I purchased a Nikon 7500. As part of the dealers warranty package I get 3 free cleanings. The warranty package is over a 3 year period. How often should I get the camera cleaned. Also how should I handle lens. Thank you.


As needed.

Reply
Sep 29, 2020 08:04:58   #
no12mo
 
Michael S wrote:
Last year I purchased a Nikon 7500. As part of the dealers warranty package I get 3 free cleanings. The warranty package is over a 3 year period. How often should I get the camera cleaned. Also how should I handle lens. Thank you.


On the camera sensor etc: Go out and get an 18% grey card:
Amazon = https://www.amazon.com/s?k=18%25+grey+card&crid=82BZ6QTY8UQK&qid=1601379612&sprefix=18%25%2Caps%2C174&ref=sr_pg_1

BH Photo
https://www.bhphotovideo.com/c/search?Ntt=18%25%20grey%20card&N=0&InitialSearch=yes&sts=ma

Keep the grey card absolutely clean. Set up a photo shoot filling the sensor completely. This is your reference shot. If you have any question regarding your sensor do a shoot with the grey card and compare with the original grey card. Better yet set up an interval where you take more grey card shoots and compare the results carefully by zooming in with your photo editor.

If you see anything that represents a piece of dust or maybe even another problem with your sensor it's time to take your camera into the shop for them to take a look.

I find it incredulous that we need to be reminded not drop our lens or handle it in a hostile environment. That's why I have two D500 bodies so I can go into a shoot without needing to change my lens. If changing a lens is necessary, whenever possible work over a soft flat surface while changing any lens. Anyone who finds finger smudges on their lens should have an expert friend see how lens changes are made and perhaps there is a bad habit that has been picked up over the years and his expert friend can point the bad habit out.

Reply
Page <<first <prev 3 of 6 next> last>>
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Main Photography Discussion
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.