sSpud wrote:
Ok..so, of course one of the newest sites having every bride on the edge of their seats with a photo op they want for the wedding day is Pinterest. That being said, there is a wedding photo posted there of a bride & groom at night with trees around them.. and a glowing light behind them that looks amazing. Obviously the photographer put the light (looks to be an LED light as its more of a bright white) behind them.. but what type of light would you use? The picture is amazing and I would love to try something along these lines for my brother at his wedding. Thanks all!!
~the Newbie =]
Ok..so, of course one of the newest sites having e... (
show quote)
Hi sSpud
From rts2568
An easy one really, but you have to know how and, the explanation is difficult to write about, much easier to show you how but you are too far away. So we have to settle for the former here, so here goes.
1\ Shoot at night or very poor light - adjust the flash intensity to compensate for the latter and experiment or wait until darker is necessary.
2\ Pick yourself an avenue of trees or shrubs or whatever,
3\ set up a flash some distance immediately behind the subject about 20 feet I'd suspect, in the example you offered(bride and groom in this instance), This can be varied - experiment on site (the beauty of digital).
4\ Tripod not necessary but is advisable to ensure the compositional positioning is as desired and doesnt adversely change - use a quick release shoe perhaps.
5\ Use delayed action or a cable release so that you can watch from away from the eyepiece and you can talk to the subjects telling them to hold it, stay still and for you to be sure they are in the position you want them to be. Make sure the heads are positionally correct, kissing or etc.
The difficult part:
a/ calculate the flash distance to the subject to over expose so that the flashgun highlights, rather than correctly exposes.
b/ With this example considered, possibly 2 stops, maybe more.
c/ If your flash has a zoom, set it to wide.
d/ Make sure you are positioned correctly,
e/ set your camera to manual, 1/250th second, if this is your cameras flash speed, and
f/ give\set an adequate aperture to maximize the sharpness over the depth of field needed to cover the flash to subject distance - will depend on the lens used.
g/ Either wide or medium tele can be used for this one but both will give different results, both pleasing, it's just necessary for you to position the camera correctly.
h/ Set the ISO to a non-noise setting.
Your camera will either be able to trigger the flash wirelessly, or by sinc cable. Trying to use the built in flash as the trigger might spoil everything unless you are using a super tele and are a long way from the subject.
I think that's the nux of it. Now go get them memorable images.
Wish you luck.
rts2568