Printing in Photoshop
Feb 3, 2020 07:36:02 #
NewEnglandPhotoguy
Loc: Chelmsford, MA
Have you checked your image size in PS? Sometimes I forget to reset those numbers after resizing. That is when it won't print correctly.
Feb 3, 2020 07:39:08 #
Gene51 wrote:
Qimage is without a doubt the best printer application. Output exceeds the quality from Photoshop, Lightroom, or anything else I have tried.
http://www.ddisoftware.com/qimage-u/
http://www.ddisoftware.com/qimage-u/
Feb 3, 2020 08:00:24 #
mborn wrote:
Me too, easier printing from LR
I may be the odd duck out, but I have problems printing from LR! Especially if I want a borderless print. PS is my go to application for printing.
Feb 3, 2020 08:12:32 #
Feb 3, 2020 08:44:33 #
Ditto on Gene's recommendation for Qimage - look no further if you're interested in printing and don't want to buy a RIP.
Feb 3, 2020 09:11:12 #
yssirk123 wrote:
Ditto on Gene's recommendation for Qimage - look no further if you're interested in printing and don't want to buy a RIP.
There is not a MAC version of Qimage.
Feb 3, 2020 09:12:44 #
DavidPine
Loc: Fredericksburg, TX
Tinker wrote:
I have periodic problem with Photo Shop ignoring c... (show quote)
I'm assuming you are using a Canon or Epson printer. Do not print from Photoshop, Lightroom or any editing application. Canon and Epson provide software specifically for their printers that are very good.
Feb 3, 2020 09:20:52 #
GrandmaG wrote:
There is not a MAC version of Qimage.
Qimage One is the Mac version
Feb 3, 2020 09:42:11 #
DavidPine wrote:
I'm assuming you are using a Canon or Epson printer. Do not print from Photoshop, Lightroom or any editing application. Canon and Epson provide software specifically for their printers that are very good.
And you can print directly from Windows Explorer (probably the same for Mac) using the Epson or Canon drivers. The results are the same.
Qimage just makes it easier to deal with multiple images. It also uses the same Epson or Canon drivers.
Feb 3, 2020 10:04:58 #
rwm283main
Loc: Terryville, CT
First, check the document dimension (lower left corner in PS) to make sure it says 11x14
Next, in the PS Print Settings dialogue, I suspect the 11 x 14 format is a Custom Setting, so click on the Print Settings, click on Paper size, click on the 11x14 listing and then Manage Custom Settings. Make sure the size is correct.
Hope this helps
Next, in the PS Print Settings dialogue, I suspect the 11 x 14 format is a Custom Setting, so click on the Print Settings, click on Paper size, click on the 11x14 listing and then Manage Custom Settings. Make sure the size is correct.
Hope this helps
Feb 3, 2020 10:08:10 #
duffy021049 wrote:
Qimage One is the Mac version
Thanks, I didn’t see that!
Feb 3, 2020 10:23:43 #
GrandmaG wrote:
There is not a MAC version of Qimage.
Sure there is - check out Qimage One. I think you might like it.
Feb 3, 2020 10:43:57 #
Tinker wrote:
I have periodic problem with Photo Shop ignoring c... (show quote)
You do not mention anything about which printer you are using and what size etc it is set to. Your problem may be caused by the printer settings, including size you have set. FWIW.
Feb 3, 2020 11:10:59 #
I print both using Lightroom and Photoshop. They frequently default to a prior size setting instead of to the paper size setting for the image that I want to print based on paper size that I set. I, therefore, find that right before printing I go into the print settings to make sure that it is set for the proper size paper. I'm guessing that this is some sort of bug.
Feb 3, 2020 12:16:43 #
Tinker wrote:
I have periodic problem with Photo Shop ignoring c... (show quote)
The printer driver may be the culprit. Did you define a custom paper size for your printer? If Epson, then must...
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.