I am trying to use my SB-800 as a remote slave flash to supply some side light for a portrait. My problem is that i don't want to induce any strait on light from my pop-up flash on my Nikon D7000. I've tried to delete the pop up flash on the camera menu with no luck. I'm assuming there is no IR data just flash data, from the camera to the slave without the popup flash. Is there a way to use just the slave and eliminate the popup flashs additional light.
Welcome Mavenmatt,
The CLS system works great. I even use it outside.
Supposedly you set the Pop-up flash in the commander mode to "---" so it won't affect the exposure as much. It will still flash, it has to so it can trigger the remote, but it's a low-power flash. Nikon says to use low ISO and a small aperture to minimize the effect. For me it doesn't always work as well as I want, I like using wide apertures.
I have the two Nikon accessories listed below:
Nikon makes an accessory that costs less that $15 (!!!) that will take care of the problem: the SG-3IR flash panel.
http://www.bhphotovideo.com/c/product/410445-REG/Nikon_4905_SG_3IR_IR_Panel_for.htmlA more expensive but versatile fix is the SU-800 commander.
http://www.bhphotovideo.com/c/product/410490-USA/Nikon_4794_SU_800_Wireless_Speedlight_Commander.htmlLeast expensive fix is to rig a flash divertor out of foil to re-direct the light away from the subject but still let the remote see it.
Good luck!
Thanks goofynewfie!!!
Your answer is exactly what i had expected but needed to hear it from someone else. BUT the little diverter for 12 bucks is the ticket!! I'll have to jump on one next time i order something from B&H!!! In the mean time i'll try the aluminum trick???
Mavenmatt wrote:
Thanks goofynewfie!!!
Your answer is exactly what i had expected but needed to hear it from someone else. BUT the little diverter for 12 bucks is the ticket!! I'll have to jump on one next time i order something from B&H!!! In the mean time i'll try the aluminum trick???
The little diverter works well. It's included in the R1 Macro lighting kit sold by Nikon-- and is a useful replacement for the IR command unit
Mavenmatt wrote:
Thanks goofynewfie!!!
Your answer is exactly what i had expected but needed to hear it from someone else. BUT the little diverter for 12 bucks is the ticket!! I'll have to jump on one next time i order something from B&H!!! In the mean time i'll try the aluminum trick???
Hope you can afford the Nikon IR panel! I've never done the foil trick it myself, but have heard of others who have.
Good luck!
LoneRangeFinder wrote:
The little diverter works well. It's included in the R1 Macro lighting kit sold by Nikon-- and is a useful replacement for the IR command unit
Masked Man- Do you have trouble getting the Nikon flash panel out of the shoe?
It's almost like the spring is to strong.
Mavenmatt wrote:
I am trying to use my SB-800 as a remote slave flash to supply some side light for a portrait. My problem is that i don't want to induce any strait on light from my pop-up flash on my Nikon D7000. I've tried to delete the pop up flash on the camera menu with no luck. I'm assuming there is no IR data just flash data, from the camera to the slave without the popup flash. Is there a way to use just the slave and eliminate the popup flashs additional light.
Yes. Nikon sells a thingee for about $15 you put in front of the pop-up flash. It allows enough light to trigger the remote but not enough to affect exposure.
GoofyNewfie wrote:
LoneRangeFinder wrote:
The little diverter works well. It's included in the R1 Macro lighting kit sold by Nikon-- and is a useful replacement for the IR command unit
Masked Man- Do you have trouble getting the Nikon flash panel out of the shoe?
It's almost like the spring is to strong.
I did initially-- but as I've used it... not so much. I guess this means it could become too loose....
LoneRangeFinder wrote:
Masked Man- Do you have trouble getting the Nikon flash panel out of the shoe?
It's almost like the spring is too strong.
I did initially-- but as I've used it... not so much. I guess this means it could become too loose....[/quote]
Thanks
BboH
Loc: s of 2/21, Ellicott City, MD
Haven't looked at this for a while but my memory tells me that what Nikon provides with the pop-up flash is a Commander mode. In this mode, the pop-up does NOT flash - it does send a pre-flash to get a reading to make whatever adjustments back in the instant before the actual flash is made.
I have used this method with the pre flash about a foot away from my dogs eyes, , and the flash off the camera only just could be seen in his eyes,I don't really think it throws much light onto the main subject at all, If I was concerned I would most certanly just make a baffle from tinfoil to bounce the pre-flash,, I would not buy such a product. Jimmy..
BboH wrote:
Haven't looked at this for a while but my memory tells me that what Nikon provides with the pop-up flash is a Commander mode. In this mode, the pop-up does NOT flash - it does send a pre-flash to get a reading to make whatever adjustments back in the instant before the actual flash is made.
I have a D7000 sitting in front of me.
It does flash in commander mode.
It shows up in photos occasionally, depending on the circumstances. Best just to get the panel.
How often can you get a Nikon accessory for less than $15?
Mavenmatt wrote:
I am trying to use my SB-800 as a remote slave flash to supply some side light for a portrait. My problem is that i don't want to induce any strait on light from my pop-up flash on my Nikon D7000. I've tried to delete the pop up flash on the camera menu with no luck. I'm assuming there is no IR data just flash data, from the camera to the slave without the popup flash. Is there a way to use just the slave and eliminate the popup flashs additional light.
I have the same issue, thanks for asking the question!
Set the SB800 and camera to nikons command mode... on camera flash will not fire... otherwise use the "deflector- diffuser on the on camera flash" ...
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.