Architect1776 wrote:
Wrong.
An unexpected contribution from our site's favorite fool ....
Cleaning your sensor is not that hard of a deal. I've cleaned mine many times after a shoot, even if there is no indication that the sensor needs it. Just be careful and lay off the steel wool.
pdsdville wrote:
Cleaning your sensor is not that hard of a deal. I've cleaned mine many times after a shoot, even if there is no indication that the sensor needs it. Just be careful and lay off the steel wool.
Haha, good one neighbor. Steel wool, one of the best replies I have read here.
bruce
burkphoto wrote:
http://www.cleaningdigitalcameras.com
https://photosol.comThe first link takes you to a guide to cleaning dSLR and Mirrorless camera sensors.
The second site takes you to the source of the cleaning supplies I use.
I've cleaned many sensors. It's an easy procedure, but you must pay attention and use a gentle touch. Sometimes, dust can be stuck on pretty firmly, so you have to clean multiple times. Have plenty of options on hand. Start with a blower bulb to knock off grit and surface dust. End with wet cleaning (purified methanol on a lab-grade, lint-free swab) if needed. That usually removes oil, grease, and stuck-on goo.
MOST important is to cap your camera body when no lens is attached, AVOID changing lenses outdoors or in dusty, windy environments, DISCHARGE yourself of static before changing lenses or starting a cleaning, and never re-use a swab on a sensor.
http://www.cleaningdigitalcameras.com br br https... (
show quote)
Wish I could avoid changing lenses outdoors. I mostly do but when I'm hiking I only carry one body so if I need to change the lens, the best I can do is try to shelter the operation. But the results are clear. Outdoor lens changes are the culprit!
Hal Masover wrote:
I've never attempted to clean my sensors. But now with so few camera shops, there's no place to take a camera for cleaning. I'm terrified to do this for fear I'll damage my sensor. But I'm thinking this probably isn't that hard. Suggestions please.
Check out
Visible Dust. There you will find exact sensor sizes for different cameras, dry and & wet sensor cleaning products, and most importantly guides to using their products.
its not that hard, i use q-tips & 70% alky, wipe off w/a dry 1 after? or you can visit ebay & see what they have 2 offer?
Architect1776 wrote:
So says the sites idiot.
No, that would be you.
We can think of more slots to file you in but those should be sufficient.
Hal Masover wrote:
I've never attempted to clean my sensors. But now with so few camera shops, there's no place to take a camera for cleaning. I'm terrified to do this for fear I'll damage my sensor. But I'm thinking this probably isn't that hard. Suggestions please.
Ok, after two pages of replies I think it is time for me to step in.
First of all, do you have spots or dust on your sensor ?
If so, how much and how long has it been there.
So, this could be a simple procedure of just vacuuming out the particles if loose enough to get them or could take a little more like the swabbing procedure.
I truly understand your concern because I screwed up a cleaning one time and ruined my sensor because the flap came down and pushed against the swab I was using and pinched it in and such it damaged the sensor.
I had cleaned mine before with no problems but that day I screwed it up.
So, with all the very good feed back you have received from the brain trust here I think you are in a position to decide what to do IF you have a sensor issue.
IF you are really not ready to try this I would suggest if there is not a photography group near you or place to take it then either send it off of just do for it and try it yourself.
Best of hope for you brother and please let us know how it works out.
Bruce.
selmslie wrote:
No, that would be you.
We can think of more slots to file you in but those should be sufficient.
They need to meet up and give each other a big loving hug and get over this. Or, just fist fight it out and let us all know how it came out.
bruce
riderxlx wrote:
They need to meet up and give each other a big loving hug and get over this. Or, just fist fight it out and let us all know how it came out.
bruce
They are not equally to blame here.
CHG_CANON knows what he is talking about and Architect1776 is just trolling.
The solution to dust on the sensor is to start with the least harmful solution which is to blow or shake it off with the lens off facing down. The next step would be to try to brush it off with a clean soft brush. Cleaning it off with wet swabs would be the last resort.
selmslie wrote:
They are not equally to blame here.
CHG_CANON knows what he is talking about and Architect1776 is just trolling.
The solution to dust n the sensor is to start with the least harmful solution which is to blow or shake it off with the lens off facing down. The next step would be to try to brush it off with a clean soft brush. Cleaning it off with wet swabs would be the last resort.
Yes I think we all know that but it is still entertaining to see the shit fights between members.
bruce
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.