Advice on shoulder strap.
billnikon wrote:
Shoulder straps are fine, but that is one heavy rig. I used to use a padded Black Rapid strap like the following one
https://www.bhphotovideo.com/c/product/1278394-REG/blackrapid_361005_sport_breathe_single_strap.htmlMake sure you attach it to the tripod collar of your lens.(turn the collar so it faces up toward the top of the camera)
This rig was hard to use fast as I found the strap always got in the way.
Now I use the following one, the camera and lens sits on my hip, no more sour shoulders using a camera strap. It has a locking device so it cannot come loose.
https://www.bhphotovideo.com/c/product/1392299-REG/spider_camera_holster_200_spiderpro_single_camera_system.htmlYou will need one more plate, the plate that comes with the above comes with a plate for the camera, you will need the following plate for the lens collar.
https://www.bhphotovideo.com/c/product/1392303-REG/spider_camera_holster_305_spiderpro_lens_collar_plate.html?sts=pi&pim=YI now use my spider rig for my Sony a7r4 with the 200-600 sony lens. And I hand hold my Sony a9 with 600 f4 lens. If I need the 200-600 mm zoom, I simply place my 600mm with the a9 down, and then detach (easy to do) my sony a7r4 with the 200-600 and shoot away. Again, it is important to rotate the lens collar so it faces up, this way the camera and lens carries easier.
No more shoulder pain, it sits on your hip and now you look like a western gun slinger ready for any thing wildlife has to throw your way. If your set up properly the camera and lens faces behind you.
Again, I have used most of the shoulder strap companies out their and the spider system is the best I have found.
Good luck and keep on shooting until the end.
Shoulder straps are fine, but that is one heavy ri... (
show quote)
Wow! That Spider holster is a dandy! A little pricy but I may have a go at it. Thanks, Bill!
rmalarz wrote:
The only straps I use on any of my cameras are those made by Upstrap.
https://journeycamera.com/The company produces the straps here in the U.S. They also have a great customer relations approach.
--Bob
Classy, exclusive, and looks to be well made. I like they are made in the USA. This is on my short list.
Thanks, rmalarz!
I have used an UpStrap for many years. It is a quality strap with a simple design. With those two things, not much can go wrong with the strap.
V2volk wrote:
I have the Black Rapid Sport as well and like it
I see Black Rapid is very popular. Added to shortlist.
Thanks, V2volk!
This brand is definitely budget-friendly and made in the USA! I will most certainly check them out.
Stay safe and warm up there.
Thanks, jerryc41
Geofw wrote:
Personally I prefer Optech straps, as their system does not use the tripod mount.
https://www.optechusa.com/I feel it puts too much strain on one point, the Optech system can be configured for multiple mounting points using their system connectors fastened to the camera strap mounts.
I haven't tried any of the other straps mentioned, everyone has their own favorites.
Thanks, Geofw. Good points. Simpler the better.
SkyKing wrote:
Peak Design strap and the capture clip so my hands are free and it’s not swinging around...
Interesting concept and design. Mulling it over.
Thanks, SkyKing.
Rokko wrote:
I have used an UpStrap for many years. It is a quality strap with a simple design. With those two things, not much can go wrong with the strap.
Thanks, Rokko. I like the simple design.
Different ones work for different people. Personally I like op-tec.
I am happy with my Peak Designs straps, and use them with a full-frame body and long lenses including the 200-500. Always felt secure and reasonably comfortable given a somewhat awkward lens.
I've got a black rapid sport strap and I've also got a peak design slide version 3. For heavier lenses I'm much prefer the black rapid sport.
Jeffcs
Loc: Myrtle Beach South Carolina
First NEVER let a heavy lens hang from the body mount
As far as camera straps I like the peak design so I can quickly remove the strap if I want
For heavy camera-lens combinations, it’s best to connect a shoulder strap to the lens foot instead of the camera (as previously mentioned).
I have about 30 different camera straps that I use for different camera-lens combinations. For my heavy combinations, I use a replacement feet for my lenses and a Quick-Detach (QD) shoulder strap, both from Really Right Stuff. Call them. They are super helpful.
If you’re worried about weight with the QD connection, it may be helpful to know that I have carried very heavy combinations with Canon 1DX and Canon 200-400mm f/4L w/ 1.4TC (built in).
I just checked the RRS website and they do have a replacement foot for your lens and the MAGPUL MS4 DUAL QD SLING GEN2. (Read or call about a possible additional item that might be needed with the lens foot.)
DirtFarmer wrote:
I gave up on shoulder straps a decade ago or more. The straps were limiting and they were catching on things. I carry my camera in my hand. Large lenses are carried using the tripod foot as a handle. I have never had a problem with dropping a camera.
There are times when I need my right hand for something else. I either put the camera down or place the lens in my left bent elbow and press the camera into my body.
I have been able to do this during 12 hour events. There are always a few times I can take a break for a couple minutes.
I gave up on shoulder straps a decade ago or more.... (
show quote)
I use a neck strap only as a tether when I need both hands free for some reason. If I were to actually use a strap to CARRY, it would also be tethered to a waist belt to keep from flying around ! If I am going long distances, I will use a neck strap tether and the camera/lens will be a waist/chest belt supported soft case - yes, even and especially LARGE lenses. NO banging accidents !
.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.