Canon MX922 multi-machine, hello.
Jun 5, 2019 10:23:46 #
Just wondering if anyone else has or had the same problem. After a few calls to Canon maybe UHH can help. Seems as if Canon has no answer for this problem. When on a voice call (optimum cable service) at times I get disconnected and then when I establish the connection again the person on the other end says that they heard a fax machine on the line.
Canon tried using different settings and still not corrected.
Combo unit is in the ON status and in the copy mode. I tried leaving in different modes but still the results are the same. Every so often I get knocked off the line by the MX922 trying to receive a fax.
I tried leaving this unit OFF, but when I start up again it takes a long time for it to get back on line. Maybe this is the only thing I can do to remedy this problem.
By the way this is the second unit I owned and had the same problem with being knocked off line once in a while. Don't ask why I purchased the same, I like it and it works for what I need to do. So guess I just might have to live with this kink in the MX922.
Canon tried using different settings and still not corrected.
Combo unit is in the ON status and in the copy mode. I tried leaving in different modes but still the results are the same. Every so often I get knocked off the line by the MX922 trying to receive a fax.
I tried leaving this unit OFF, but when I start up again it takes a long time for it to get back on line. Maybe this is the only thing I can do to remedy this problem.
By the way this is the second unit I owned and had the same problem with being knocked off line once in a while. Don't ask why I purchased the same, I like it and it works for what I need to do. So guess I just might have to live with this kink in the MX922.
Jun 5, 2019 10:37:43 #
Jun 5, 2019 10:38:35 #
jpgto
Loc: North East Tennessee
Not sure it is your printer combo. My SIL does not have a wireless printer in line period and every Sunday
night when she speaks with my wife, her sister, exactly at 8:17PM there is a noise that sounds like a FAX
machine! Then it goes into intermittent state of every couple of minutes for about 20 minutes.
She has spent hours on the phone with Opt(sp) cable with NO RESOLVE. They have been in
changed anything and everything they possibly could and it still happens!
Good luck with the evasive FAX noise!
night when she speaks with my wife, her sister, exactly at 8:17PM there is a noise that sounds like a FAX
machine! Then it goes into intermittent state of every couple of minutes for about 20 minutes.
She has spent hours on the phone with Opt(sp) cable with NO RESOLVE. They have been in
changed anything and everything they possibly could and it still happens!
Good luck with the evasive FAX noise!
Jun 5, 2019 11:40:23 #
Harry0
Loc: Gardena, Cal
It ain't them.
It's a robocall.
IF the caller determines this number is valid
AND this number responds
AND there is no voice
THEN check for fax response
THEN check for modem response
COPY to database
It's a robocall.
IF the caller determines this number is valid
AND this number responds
AND there is no voice
THEN check for fax response
THEN check for modem response
COPY to database
Jun 5, 2019 13:49:51 #
Earnest Botello wrote:
Have you tried changing phone numbers.
No I haven't....
Jun 5, 2019 13:50:52 #
jpgto wrote:
Not sure it is your printer combo. My SIL does not... (show quote)
Thanks...I know what you mean.
Jun 6, 2019 07:32:59 #
Wanderer2
Loc: Colorado Rocky Mountains
brooklyn-camera I wrote:
Just wondering if anyone else has or had the same ... (show quote)
I have the same printer and like it and have always been surprised as to how good the photo prints are. I've never had your problem but I only plug it into a telephone line when I need to send or receive a fax which is infrequent.
Jun 6, 2019 08:41:15 #
brooklyn-camera I wrote:
No I haven't....
Why not a dedicated phone line for the fax. When I was working I used 2 phone lines. The fax/printer'copier was on its own
Jun 6, 2019 10:01:49 #
Is it possible that your provider's fax signal overrides your vox for just the instant needed to tell the 922 to answer the fax? I would think that the provider's service should know that you are engaged in a voice contact and that *their* server shouldn't allow the knock-off.
If you're using a hard-wired connection to the phone system and the 922, would unplugging the 922 help?
If you're using a hard-wired connection to the phone system and the 922, would unplugging the 922 help?
Jun 6, 2019 12:57:57 #
boberic wrote:
Why not a dedicated phone line for the fax. When I was working I used 2 phone lines. The fax/printer'copier was on its own
Rarely use the fax to send or receive, not worth it to have two telco lines.
Jun 6, 2019 15:14:06 #
Ed Chu
Loc: Las Vegas NV
[quote=brooklyn-camera I]Just wondering if anyone else has or had the same problem. After a few calls to Canon maybe UHH can help. Seems as if Canon has no answer for this problem. When on a voice call (optimum cable service) at times I get disconnected and then when I establish the connection again the person on the other end says that they heard a fax machine on the line.
Canon tried using different settings and still not corrected.
Combo unit is in the ON status and in the copy mode. I tried leaving in different modes but still the results are the same. Every so often I get knocked off the line by the MX922 trying to receive a fax.
I tried leaving this unit OFF, but when I start up again it takes a long time for it to get back on line. Maybe this is the only thing I can do to remedy this problem.
By the way this is the second unit I owned and had the same problem with being knocked off line once in a while. Don't ask why I purchased the same, I like it and it works for what I need to do. So guess I just might have to live with this kink in the MX922.
i have had 2; great machine; 1st one, after a year started printing with yellow overtone; was only $69, couldn’t correct problem; after a year 2nd one wouldn’t print right; not aval. any more at cheap price; printed great; buy generic cartridges on Amazon - really cheap ( no, I don’t believe they were the problem )
Canon tried using different settings and still not corrected.
Combo unit is in the ON status and in the copy mode. I tried leaving in different modes but still the results are the same. Every so often I get knocked off the line by the MX922 trying to receive a fax.
I tried leaving this unit OFF, but when I start up again it takes a long time for it to get back on line. Maybe this is the only thing I can do to remedy this problem.
By the way this is the second unit I owned and had the same problem with being knocked off line once in a while. Don't ask why I purchased the same, I like it and it works for what I need to do. So guess I just might have to live with this kink in the MX922.
i have had 2; great machine; 1st one, after a year started printing with yellow overtone; was only $69, couldn’t correct problem; after a year 2nd one wouldn’t print right; not aval. any more at cheap price; printed great; buy generic cartridges on Amazon - really cheap ( no, I don’t believe they were the problem )
Jun 6, 2019 16:06:24 #
[quote=brooklyn-camera I]Just wondering if anyone else has or had the same problem. After a few calls to Canon maybe UHH can help. Seems as if Canon has no answer for this problem. When on a voice call (optimum cable service) at times I get disconnected and then when I establish the connection again the person on the other end says that they heard a fax machine on the line.
Canon tried using different settings and still not corrected.
Combo unit is in the ON status and in the copy mode. I tried leaving in different modes but still the results are the same. Every so often I get knocked off the line by the MX922 trying to receive a fax.
I tried leaving this unit OFF, but when I start up again it takes a long time for it to get back on line. Maybe this is the only thing I can do to remedy this problem.
By the way this is the second unit I owned and had the same problem with being knocked off line once in a while. Don't ask why I purchased the same, I like it and it works for what I need to do. So guess I just might have to live with this kink in the MX922.
[/quote
Just unplug the phone line when you are on voice calls, or put a switch on the fax phoneline to disconnect fax while in voice mode.
Canon tried using different settings and still not corrected.
Combo unit is in the ON status and in the copy mode. I tried leaving in different modes but still the results are the same. Every so often I get knocked off the line by the MX922 trying to receive a fax.
I tried leaving this unit OFF, but when I start up again it takes a long time for it to get back on line. Maybe this is the only thing I can do to remedy this problem.
By the way this is the second unit I owned and had the same problem with being knocked off line once in a while. Don't ask why I purchased the same, I like it and it works for what I need to do. So guess I just might have to live with this kink in the MX922.
[/quoteJust unplug the phone line when you are on voice calls, or put a switch on the fax phoneline to disconnect fax while in voice mode.
Jun 9, 2019 08:15:59 #
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.