Call Canon tech! They are terrific — helpful, thorough and kind.
When I was a workin' man, I serviced large format inkjets. A lot of customers used Canons instead of HPs because they were less expensive. Several of the Canons (not all, I worked on probably several hundred of them) would have issues caused by ink, non- Canon variety. With those Canons it was possible to drain the ink out of the printheads and the inkfeed tubes. I would refill the printer with Canon inks and it would usually work fine. (tried to not replace the printheads if possible as they were $500-$700 ea). Not every printer using non-eom inks would have this problem, but enough of them to convince me to use Canon inks in my Pro-100. Your description of the inks fading running the nozzle check indicates an issue with the printhead, not software. It could be caused by the ink or just a bad printhead. Possible bad connection to printhead, reseating it might help. Good luck.
mizzee wrote:
Call Canon tech! They are terrific — helpful, thorough and kind.
Agree with this. They were pretty good.
I have had same issue with two Canon printers..Pixma pro 9000 and same printer II version. Currently I have the Pro-100 and no issues (yet). I also use the cheap ink and have wondered if it may be less "pure" and subject to some residue deposit in the head. Anyway, the last printer purchase Pro - 100 I got for $80 brand new in box on Craigs list! That was cheaper than a Canon supply of ink. It has worked fine for a year now. Worth checking Craigs List if you live in a large metropolitan area. Canon apparently bundled the printer with camera equipment and a lot of folks dispose of the huge printer.
dpullum wrote:
Agreed, blaming the ink is the myth of purists and is bunk. Inks are not made in heaven with witches around a cauldron using Fillet of a fenny snake and other ingredients** that are impossible to analyze by modern chemistry instrumentation. The ingredients and formulations have been around for decades, nothing amazing and new.
UV stabilizers are common and low cost so are standard in aftermarket inks. OEM inks contain components that are analyzable by modern chemistry instrumentation and thus aftermarket can duplicate or improve on OEM inks.
**
http://www.shakespeare-online.com/plays/witcheschants.htmlAgreed, blaming the ink is the myth of purists and... (
show quote)
Perhaps they forgot, Eye of Newt and Toe of Frog. It happens from time to time with some batches.
Dennis
Sounds like you need a deep clean up cleaning back to like new condition
Sounds like you are in need of a good cleaning. Back to like new. Good printing.
finnmap wrote:
When I was a workin' man, I serviced large format inkjets. A lot of customers used Canons instead of HPs because they were less expensive. Several of the Canons (not all, I worked on probably several hundred of them) would have issues caused by ink, non- Canon variety. With those Canons it was possible to drain the ink out of the printheads and the inkfeed tubes. I would refill the printer with Canon inks and it would usually work fine. (tried to not replace the printheads if possible as they were $500-$700 ea). Not every printer using non-eom inks would have this problem, but enough of them to convince me to use Canon inks in my Pro-100. Your description of the inks fading running the nozzle check indicates an issue with the printhead, not software. It could be caused by the ink or just a bad printhead. Possible bad connection to printhead, reseating it might help. Good luck.
When I was a workin' man, I serviced large format ... (
show quote)
Appreciate your take on the problem. One more thing. Could it be that I didn't print enough with this machine? I used another for most of my requirements, but printed a 4x6 weekly on the Pro-100.
mborn wrote:
CartridgeAmerica sells ink head cleaner fluid at very reasonable cost
Never heard of them. Now I have and will check them out. Thanks for your suggestion.
Fredrick
Loc: Former NYC, now San Francisco Bay Area
djtravels wrote:
I have color problems with my Canon Pro-100 printer. This is one that Canon pushed out at a great savings
to the purchaser. Gradually, the colors went from great to complete loss of blue colors. I've run the maintenance nozzle cleaning many times. Each printer test page gave me fainter color renditions each time. I use Red River Paper exclusively.
I am not using Canon ink, but don't blame that since I've been using the same ink for several years.
I've done everything possible under the maintenance dropdown file with no good results. Anyone else have that problem with one of these "sale" model Pro 100s
Any suggestions to help me cure things are greatly appreciated. I won't be able to get back to you before tomorrow Am, at the earliest.
Thank you in advance,
djt
I have color problems with my Canon Pro-100 printe... (
show quote)
Sounds like you’re low on blue ink?? Have you tried new ink cartridges?
djtravels wrote:
I have color problems with my Canon Pro-100 printer. This is one that Canon pushed out at a great savings
to the purchaser. Gradually, the colors went from great to complete loss of blue colors. I've run the maintenance nozzle cleaning many times. Each printer test page gave me fainter color renditions each time. I use Red River Paper exclusively.
I am not using Canon ink, but don't blame that since I've been using the same ink for several years.
I've done everything possible under the maintenance dropdown file with no good results. Anyone else have that problem with one of these "sale" model Pro 100s
Any suggestions to help me cure things are greatly appreciated. I won't be able to get back to you before tomorrow Am, at the earliest.
Thank you in advance,
djt
I have color problems with my Canon Pro-100 printe... (
show quote)
I agree with Drmike99 - Use Canon ink. More expensive, but reliable. I already been there, done that, got the tee shirt (but the colors are off).
djtravels wrote:
Appreciate your take on the problem. One more thing. Could it be that I didn't print enough with this machine? I used another for most of my requirements, but printed a 4x6 weekly on the Pro-100.
If you are printing once a week, that should be plenty (canon support recommended that). In this case, size does not matter. Even just a nozzle check would be sufficient.
I sometimes go several weeks without printing. I do leave it turned on, tho. Jose Rodriguez (youtube printer guru) recommends that.
Buy a new printer and use OEM INK like canon , sorry but you probable have a clogged print head or 2 , printers and not that expensive any more . Mike
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.