Filter quality
Dec 19, 2018 01:18:02 #
Senior Photog wrote:
Hi Richard,
I want the filter mainly to protect the front
element from scratches. I would rather
not shoot through another piece of glass.
...Joe
I want the filter mainly to protect the front
element from scratches. I would rather
not shoot through another piece of glass.
...Joe
Sorry, I've been reading from the end to the beginning so I'm out of sequence. Question, do you truly believe the front element of your lens is really that fragile? If you are concerned about stuff coming into contact with the front of the lens, use a hood.
If your lens is that fragile, I really recommend getting a better lens, seriously.
Dec 19, 2018 03:56:21 #
wdross
Loc: Castle Rock, Colorado
Senior Photog wrote:
Fellow Hogs, br br I need a 77mm UV filter for my... (show quote)
There was another person asking the same question I believe earlier in the week. My opinion is if you are going to spend money, buy the best you can afford. rmalarz has given good advice as far as B+W is concerned. Two other brands that I think are worthwhile considering are Hoya and Breakthrough. Be aware that digital cameras are somewhat insensitive to UV below 5000'. That does not mean "do not buy one". Some brands of lenses are more prone to sand scratching the front element than others and it will help protect from that. And if you should get out here to Colorado, most of Colorado is above 5000' (I live at 6553' and I am not even in the foothills). Many people use the filter as a lense protector. My opinion is a lens cap and lens hood will provide the best protection possible. I have been banging around my filters and lenses since 1975 and have yet to scratch a filter or lens. Even with a lens cap and lens hood on, a filter and lens can get scratched and/or damaged, but it is rare.
Dec 19, 2018 06:04:55 #
Dec 19, 2018 06:09:40 #
Leitz wrote:
Someone has given you some bum advice - the filter goes on the lens.
I guess you are the only one who didn't know what he meant.
Dec 19, 2018 06:36:14 #
billnikon
Loc: Pennsylvania/Ohio/Florida/Maui/Oregon/Vermont
Senior Photog wrote:
Fellow Hogs, br br I need a 77mm UV filter for my... (show quote)
I do not use filters, especially UV filters. There is no need for a UV filter. For protection always have your lens hood attached. Yes, it is that easy.
Dec 19, 2018 06:40:29 #
Dec 19, 2018 06:43:38 #
Mr. SONY
Loc: LI, NY
Leitz wrote:
Someone has given you some bum advice - the filter goes on the lens.
Dec 19, 2018 07:01:29 #
catchlight..
Loc: Wisconsin USA- Halden Norway
Don't forget that two stacked "UV" filters can be a better solution...
When the first one shatters the second will stop the shattering glass from destroying the lens coating. The only other solution are plastic filters but that seems silly to me.
I know someone who has stacked 5 due to his obsessive paranoia... poor guy
When the first one shatters the second will stop the shattering glass from destroying the lens coating. The only other solution are plastic filters but that seems silly to me.
I know someone who has stacked 5 due to his obsessive paranoia... poor guy
Dec 19, 2018 07:16:39 #
I only use B&W filters. Don't put cheap glass in front of a $$$ lens. It's cheaper to replace a filter than a lens also always use a lens hood when you can.
Dec 19, 2018 07:20:02 #
Dec 19, 2018 08:36:56 #
I all was remember from when I used film that the final picture can only be as good as your cheapest piece of glass used ie lens, filter or enlarging lens.
Dec 19, 2018 08:52:34 #
I like Hoya, and yes all my lens have a UV filter attached. And yes I know that filter not needed or any other really needed except when doing certain shooting or conditions.
I find it easier to clean filters then lens glass. I also go without lens cap most of the time usually on only when lens or camera not in use.
I find it easier to clean filters then lens glass. I also go without lens cap most of the time usually on only when lens or camera not in use.
Dec 19, 2018 09:01:51 #
To get 80% plus or minus 10% it will cost you X, but to get 100% it can cost 2, 3 or 4X and at time more. I had to send in and have AF-S Nikkor 24-70 1:2.8E ED lens refurbished, the front lens got badly scratched. I now have and use Hoya filters on all my lens.
Dec 19, 2018 09:26:53 #
LWW
Loc: Banana Republic of America
rmorrison1116 wrote:
Just out of curiosity, what are you filtering?! I suggest, instead of a UV filter, use a lens cap.
I tried that but my photos kept coming out black.
Dec 19, 2018 09:55:53 #
timcc
Loc: Virginia
High quality UV or clear filters can help protect your lens in dusty, sandy, or damp conditions, and you are unlikely to notice any degradation in image quality. Personally, I would also rather keep cleaning a filter than the lens surface.
Except at high altitudes, UV filters do not help your IQ. Good polarizing and neutral density filters, on the other hand, serve specific purposes and can enhance your photos.
Except at high altitudes, UV filters do not help your IQ. Good polarizing and neutral density filters, on the other hand, serve specific purposes and can enhance your photos.
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.