Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Main Photography Discussion
Computer can’t read SD card
Page <prev 2 of 2
Nov 19, 2018 11:59:03   #
CPR Loc: Nature Coast of Florida
 
TKT wrote:
I had a similiar problem once but it wasn't the computer, it was a bad SD card. Once I removed the card from the camera the card fell apart and couldn't be used again. So check the card very carefully before reusing it. It seemed that the camera held the card so it could be read correctly, but once removed from the camera the card fell apart and couldn't be used again.


Had the same problem but just put a dab of super glue on and put the parts back together. The tiny little Write Protect piece was lost so I had to make a drop of superglue be the OK setting. Still use that card today..........

Reply
Nov 19, 2018 12:04:16   #
dsmeltz Loc: Philadelphia
 
Morning Star wrote:
Connect the camera to the computer by cable, and transfer the photos that way.
Or, in other words, use the camera as a card-reader.

(Asking the obvious: Your card is not locked, is it? Check the little switch on the side).




Except the lock button should have no effect on the card being read. The lock is a write lock.

Reply
Nov 19, 2018 12:08:42   #
47greyfox Loc: on the edge of the Colorado front range
 
dsmeltz wrote:


Except the lock button should have no effect on the card being read. The lock is a write lock.

Agree, but more importantly..... why would anyone risk using a card that has been gerryrigged when they are so damn cheap?

Reply
 
 
Nov 19, 2018 16:34:09   #
JeffDavidson Loc: Originally Detroit Now Los Angeles
 
Connect the camera directly to the computer via cable, transfer all of the pictures, verify that they have transferred and then reformat the card in the camera.

Reply
Nov 19, 2018 16:35:01   #
TheShoe Loc: Lacey, WA
 
Morning Star wrote:
Connect the camera to the computer by cable, and transfer the photos that way.

(Asking the obvious: Your card is not locked, is it? Check the little switch on the side).


That is irrelevant if the card cannot be read. The switch keeps anything from writing on the card. If it was write-protected when the pictures were taken and the camera did not complain about, it would be time to trade the camera for a different make.

Reply
Nov 19, 2018 16:49:09   #
TheShoe Loc: Lacey, WA
 
gordone wrote:
The SD card readers in the computer are always a crap shoot. Problems with some not supporting both SD and SDHC and different drivers on Windows updates, etc. Just buy a USB card reader and your worries will be over.

I have never had a problem with the computer's card readers. Maybe it is a problem with how the card is handled. The external readers are not a good solution if you think the drivers for the internal readers are at fault because the same drivers are used.

Reply
Nov 19, 2018 20:54:06   #
gordone Loc: Red Deer AB Canada
 
TheShoe wrote:
I have never had a problem with the computer's card readers. Maybe it is a problem with how the card is handled. The external readers are not a good solution if you think the drivers for the internal readers are at fault because the same drivers are used.


I can't agree with your statement that the same drivers are used. On my laptop the internal card reader uses a Realtek PCIE card reader driver. If you use an external USB reader it uses the Microsoft USB mass storage device driver. There are lots of issues with the internal card reader when updating to Win 10. Need to checks your facts..

Reply
 
 
Nov 20, 2018 00:14:40   #
tjw47 Loc: Michigan
 
Locking the card only prevents writing to the card. Does not affect reading the card

Reply
Nov 20, 2018 08:20:46   #
dsmeltz Loc: Philadelphia
 
JeffDavidson wrote:
Connect the camera directly to the computer via cable, transfer all of the pictures, verify that they have transferred and then reformat the card in the camera.




TheShoe wrote:
That is irrelevant if the card cannot be read. The switch keeps anything from writing on the card. If it was write-protected when the pictures were taken and the camera did not complain about, it would be time to trade the camera for a different make.


The Op says the card is read by the camera. He can see the photos on camera, so the OP should be able to transfer using a cable. see below:

Jacqui Burke wrote:
I just returned from a trip to Easter Island and Patagonia. I was limited in the camera gear I could take especially as the Patagonia part of the trip was completely on horseback. I chose to take my Nikon D7200 with a 18-200 mm lens which I left locked in my suitcase for the horseback riding portion. I took an old Fuji FinePix HS 30 bridge camera for a longer reach and because I wouldn’t mind getting it banged up in my saddle bags for the horseback riding portion. Now that I am home, none of my computers or my ipad will recognize the photos from the Fuji camera. The computers say the card needs to be formatted. Obviously I can’t do that or the photos will be lost. I can view all the photos with the Fuji camera, so they are on the card. What is the best way of recovering these photos from the card to make them useable? Thanks in advance for your help! The trip was fabulous, by the way!
I just returned from a trip to Easter Island and P... (show quote)

Reply
Page <prev 2 of 2
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Main Photography Discussion
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.