Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
HDR Photography -- Before and After
HDR color question
Sep 11, 2016 14:29:57   #
bdk Loc: Sanibel Fl.
 
The first pic is SOOC ,you can see that the wagon is blue gray and white, when I run the pic thru Photomatix it read the colors differently
I tried to tone it down, change the color settings the white balance etc. etc. I tried lightening the original pic
is PS6 but I got a lot of noise that Topaz wouldnt take out. when I originally shot the image in a near totally dark barn I opened
the Aperture , bumped up the ISO and slowed down the shutter to get more light, Most of the shots were very grainy because of the high ISO. Or blurry because I didnt have the Tripod with me and the shutter speed was too slow for me to hand hold. In this case I don't like the end result. I'm open to any helpful criticism or ideas concerning correcting the photo,





Reply
Sep 11, 2016 15:14:16   #
jeep_daddy Loc: Prescott AZ
 
This is not an instance where HDR is needed. You just have exposed for it properly, or used a speedlite. But HDR is really only useful if you have a setting where the dynamic range is beyond the camera's capability. That small window that would probably be blown out is not reason enough to use HDR in this case. But if you were shooting indoor pictures of a house, (realtors often use HDR) where you would like the view through the window to not be blown out, HDR can be incredibly handy.

If you are just playing with Photomatix, then go easy on the setting, then edit it again in Photoshop to remove noise, and set the W/B properly.

Reply
Sep 11, 2016 15:27:02   #
bdk Loc: Sanibel Fl.
 
I tried to properly expose by bringing in as much light as I could, I exposed for the wagon, not the window, I use HDR to bring out items in the dark, this time just not happy with how it came out. I also tried changing WB in ACR but none made it any better than what u see.

Reply
 
 
Sep 11, 2016 15:32:38   #
jeep_daddy Loc: Prescott AZ
 
bdk wrote:
I tried to properly expose by bringing in as much light as I could, I exposed for the wagon, not the window, I use HDR to bring out items in the dark, this time just not happy with how it came out. I also tried changing WB in ACR but none made it any better than what u see.


Yes, I played with it in Photoshop too. I couldn't do much better either. But if you had bumped the exposure up by about a stop and a half or two, it would have been good. If your shutter was too slow, it's time to bump up the ISO. If I remember you used a quite modern camera with a good sensor so why not take advantage of that sensor.

Reply
Sep 12, 2016 06:58:47   #
mallen1330 Loc: Chicago western suburbs
 
Try Photomatix's "Fusion - Natural" setting instead of tonemapping. It might result in more natural colors.

Reply
Sep 12, 2016 10:04:40   #
K7DJJ Loc: Spring Hill, FL
 
bdk wrote:
The first pic is SOOC ,you can see that the wagon is blue gray and white, when I run the pic thru Photomatix it read the colors differently
I tried to tone it down, change the color settings the white balance etc. etc. I tried lightening the original pic
is PS6 but I got a lot of noise that Topaz wouldnt take out. when I originally shot the image in a near totally dark barn I opened
the Aperture , bumped up the ISO and slowed down the shutter to get more light, Most of the shots were very grainy because of the high ISO. Or blurry because I didnt have the Tripod with me and the shutter speed was too slow for me to hand hold. In this case I don't like the end result. I'm open to any helpful criticism or ideas concerning correcting the photo,
The first pic is SOOC ,you can see that the wagon ... (show quote)


I just tried PS elements 14 and got this.



Reply
Sep 12, 2016 10:28:09   #
cjc2 Loc: Hellertown PA
 
Goes to show -- Get it right IN camera!

Reply
 
 
Sep 12, 2016 15:47:43   #
gsrunyan Loc: Aurora, CO
 
I liked the original.

Glenn

Reply
Sep 12, 2016 18:58:35   #
Wahawk Loc: NE IA
 
I like the original, but understand what you were trying to do.
I use PSPv6 to edit twice. #1 is just using the "auto-fix" option and then brightened that up a bit. #2 was my first edit plus some light tone-mapping.





Reply
Sep 12, 2016 20:21:37   #
bdk Loc: Sanibel Fl.
 
K7DJJ wrote:
I just tried PS elements 14 and got this.
Thats great, I'll go back to PS and try again.

Reply
Sep 12, 2016 20:22:38   #
bdk Loc: Sanibel Fl.
 
Yup get it right the first time, I was trying, just didnt do it this time,
cjc2 wrote:
Goes to show -- Get it right IN camera!

Reply
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
HDR Photography -- Before and After
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.