Quite suitable as travel tripod.
I have this tripod for almost a year now and have to say I'm quite satisfied with it. It is a aluminum tripod however, as I was trying to keep the price down at the time of purchase. It still does not weigh a lot, about 2.9 lbs (head incl.) I bought it as a kit (ball head incl.), while they had a special at adorama. I've got it for $155.00. The tripod itself is rated to hold 30lbs., while the ball head is rated at 44.3lbs. Due to it's small dimensions (folded 17.3")and relative light weight, I think it would make a good travel companion. I have attached a few images, for which I have to ask for some forgiveness, because they are terrible. I just did a few snapshots showing the bag and such, without paying attention to shutterspeed, focus and such, just snapshots like I said (triggered the remote with my mouth, to have arms free). I did checked the focus when shooting the ball head though. As you can see, the tripod comes with a nice, padded case, that has an interior and an outside, zippered pocket. In the inside you will find a short center column (if you want to remove the standard one) also a mounting platform (for ball head) and a hand strap for the monopod (one leg unscrews and acts as a monopod). You will also find the needed allen wrenches and a carrying strap for carrying the tripod by itself (without the case). A nice padded little bag for the ball head is in there too. The tripod is the Siriui N-1004 and it came with the ball head K-10x. Again, sorry for the bad quality pictures, but they will give you an idea. I use this tripod with the 5D M III and the 70-200/2.8 II and/or heavier lenses and had no trouble with it. The ball head movements are very smooth and ones you set it, the camera stays put. I think it was a good deal for the money.
The ball head has separate tension control and the release plate is Acra Swiss style. I always used to prefer the flip-leg-logs ( for ease and speed of use), but these twist lockes are just as fast ( a1/4 turn unlockes and lockes the legs).
speters wrote:
I have this tripod for almost a year now and have to say I'm quite satisfied with it. It is a aluminum tripod however, as I was trying to keep the price down at the time of purchase. It still does not weigh a lot, about 2.9 lbs (head incl.) I bought it as a kit (ball head incl.), while they had a special at adorama. I've got it for $155.00. The tripod itself is rated to hold 30lbs., while the ball head is rated at 44.3lbs. Due to it's small dimensions (folded 7.3")and relative light weight, I think it would make a good travel companion. I have attached a few images, for which I have to ask for some forgiveness, because they are terrible. I just did a few snapshots showing the bag and such, without paying attention to shutterspeed, focus and such, just snapshots like I said (triggered the remote with my mouth, to have arms free). I did checked the focus when shooting the ball head though. As you can see, the tripod comes with a nice, padded case, that has an interior and an outside, zippered pocket. In the inside you will find a short center column (if you want to remove the standard one) also a mounting platform (for ball head) and a hand strap for the monopod (one leg unscrews and acts as a monopod). You will also find the needed allen wrenches and a carrying strap for carrying the tripod by itself (without the case). A nice padded little bag for the ball head is in there too. The tripod is the Siriui N-1004 and it came with the ball head K-10x. Again, sorry for the bad quality pictures, but they will give you an idea. I use this tripod with the 5D M III and the 70-200/2.8 II and/or heavier lenses and had no trouble with it. The ball head movements are very smooth and ones you set it, the camera stays put. I think it was a good deal for the money.
I have this tripod for almost a year now and have ... (
show quote)
What tripod?
All I see is a hand holding a carry case.
Edit: Thanks for adding the other pics.
sp, did you mean to include a shot of the pod itself?
Also, did you mean 17"?
Would be nice to see it set up.
SS
speters wrote:
I have this tripod for almost a year now and have to say I'm quite satisfied with it. It is a aluminum tripod however, as I was trying to keep the price down at the time of purchase. It still does not weigh a lot, about 2.9 lbs (head incl.) I bought it as a kit (ball head incl.), while they had a special at adorama. I've got it for $155.00. The tripod itself is rated to hold 30lbs., while the ball head is rated at 44.3lbs. Due to it's small dimensions (folded 17.3")and relative light weight, I think it would make a good travel companion. I have attached a few images, for which I have to ask for some forgiveness, because they are terrible. I just did a few snapshots showing the bag and such, without paying attention to shutterspeed, focus and such, just snapshots like I said (triggered the remote with my mouth, to have arms free). I did checked the focus when shooting the ball head though. As you can see, the tripod comes with a nice, padded case, that has an interior and an outside, zippered pocket. In the inside you will find a short center column (if you want to remove the standard one) also a mounting platform (for ball head) and a hand strap for the monopod (one leg unscrews and acts as a monopod). You will also find the needed allen wrenches and a carrying strap for carrying the tripod by itself (without the case). A nice padded little bag for the ball head is in there too. The tripod is the Siriui N-1004 and it came with the ball head K-10x. Again, sorry for the bad quality pictures, but they will give you an idea. I use this tripod with the 5D M III and the 70-200/2.8 II and/or heavier lenses and had no trouble with it. The ball head movements are very smooth and ones you set it, the camera stays put. I think it was a good deal for the money.
The ball head has separate tension control and the release plate is Acra Swiss style. I always used to prefer the flip-leg-logs ( for ease and speed of use), but these twist lockes are just as fast ( a1/4 turn unlockes and lockes the legs).
I have this tripod for almost a year now and have ... (
show quote)
Hi speters
What does Acra Swiss style mean when you describe the ball head please?
photosarah wrote:
Hi speters
What does Acra Swiss style mean when you describe the ball head please?
It does describe the style of the quick release plate used ( there are many different ones), many manufacturers create their own, but over the years, the Acra Swiss style (used to be a Swiss company, hence the name) has established itself as the norm/standard, that is used by most, so its compatible across a very wide range of products and I guess, is the most used around the world (by pros and amateurs alike).
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.