Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Links and Resources
Nikon D7000 Firmware Update
Apr 8, 2013 11:37:17   #
Jack Fisher Loc: New Mexico, USA
 
Nikon USA released update A1.03 B1.04 for the D7000 with miscellaneous changes.
It is available at http://support.nikonusa.com - click on "update" link.

Reply
Apr 8, 2013 15:30:21   #
traveler90712 Loc: Lake Worth, Fl.
 
The update includes the below;


Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.

Modifications enabled with this upgrade of firmware, release date November 10, 2011

An error where the card may not have been recognized when some memory cards were used has been addressed.
The following issues occurred when the mode dial was rotated from U1 or U2 to another shooting mode or from another shooting mode to U1 or U2 when the power was off or when the exposure meters are off (Auto meter-off). These issues were resolved.
A new folder is sometimes created despite the fact that the current folder does not yet contain 999 files and none of the files are numbered “9999”.
The number of remaining exposures may not be displayed as specified in the settings.
The setting for Role played by card in Slot 2 may change between Overflow, Backup, and RAW Slot 1- JPEG Slot 2.
An issue where Battery info in the setup menu sometimes showed sufficient remaining charge even when the remaining charge for the AA batteries inserted in the MB-D11 battery pack was low has been resolved.
An issue where a saved photo may not have been displayed properly when a movie was displayed in playback mode while saving the photo has been resolved.
An issue where zoom in or zoom out may not have performed properly when the playback zoom in or playback zoom out button was pressed while in Live view has been resolved.
The message displayed when the internal memory of the Wireless Transmitter WT-4 is formatted from the Format transmitter's memory under Device settings in Wireless transmitter of the camera’s setup menu was changed from Done to Built-in memory formatted.
The message displayed when the internal memory of the Wireless Transmitter WT-4 is formatted from the Format transmitter's memory under Device settings in Wireless transmitter of the camera’s setup menu was changed from Done to Built-in memory formatted.

Reply
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Links and Resources
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.