Any idea what could have happend here,, I have a D90 and wanted to 'tether' to a 32in HDTV, so I bought a 5mtr HDMI type c cable from Ebay, hooked it all up, just to see the image I would normally see on the LED that's all I wanted,,, So the image came up on the TV for a split second there was a crackling sound from the TV and the screen went blue on the TV,, I tried again to show the image and again the same happend and the crackling was heard again,,, I took the D90 and the HDMI lead down to my main TV 42in led hd and tried the same operation and the image came up and worked perfectly,, I went back up to the first TV tried it again and the image stayed a split second crackled and the TV died,,No life at all,,checked the fuse its ok,,electricity getting to the TV along the mains lead but it's DEAD,,, any idea what has happend Please..By the way the D90 is ok,,Strange !!! Thank you for any advice,, Jimmy
BHC
Loc: Strawberry Valley, JF, USA
Does the cable have a loop through a ferrite coil?
No its just a straight through cable,,, Whats strange is it worked ok on my other TV,, both have HDMI inputs
BHC
Loc: Strawberry Valley, JF, USA
jimmix7 wrote:
No its just a straight through cable,,, Whats strange is it worked ok on my other TV,, both have HDMI inputs
Check to ensure there are no bent pins. Also see:
http://www.hdmi.org/index.aspx
have you used that input of the TV before? May be a bad input on the TV. Try a DVD player pluged into the same input.
Thanks for the helps and responses..I found the lead I bought off ebay was just a cheap piece of junk,, Had the TV fixed and new more expensive lead,, and its all ok now,,,,
Another you get what you pay for. Hope the TV repair didn't set you back too much.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.