Now that is a possibility and of course a much wiser choice. I have a number of 45 Colt revolvers, one I just shot yesterday, a 1939 Colt New Service, using an old Elmer Keith load of 9 grains of Unique powder under a 260 grain cast 454 bullet. I would have no problem dropping a deer or elk if the bullet was placed in the right place. Another I shot yesterday was a Freedom Arms Model 97 lightweight 5 shot, also in 45 Colt. I have shot that one with some 300 grain cast bullets and would feel comfortable using it if necessary on a charging bear. It does not handle those cartridges well though due to a very heavy recoil. Those 300 grain bullets are more likely to be used in either one of two Ruger Bisley 45 Colt revolvers I have. Those bullets would give great penetration but of course would have to be placed well on a charging bear. Even a shot from a heavy rifle would have to be placed correctly on a charging bear.
I like your terminology of 45 Long Colt. Many say it is not a proper name for the old 1873 Colt cartridge but I think it is properly named. The shorter 45 cartridge of the time would have been the 45 Schofield, shorter than the Long Colt and used in the Smith and Wesson top break revolver.
We really need to get together to do some shooting and fishing.
One more comment is my personal 1911-A1 series 70 45 ACP has Smith and Wesson adjustable rear sights installed by an old gunsmith in the 1970's, James Hoag. It was somewhat common at the time and was a great addition to a 1911 giving it target sights but very low on the slide. I carried it off duty most of the time back in the 70's.
Dennis
Now that is a possibility and of course a much wis... (show quote)
That Elmer Keith load with a hard swaged bullet would probably take care of a bear with any head shot...the heck with aiming for that little ear while under a "bit" of stress.
One of my favorite Ruger single action revolvers (I have them in four calibers) is an early Blackhawk Convertible with a 4.6" barrel in .45 ACP/.45 Long Colt. I practice with the somewhat cheaper .45 ACP.
I can't argue with that. They come prepared for battle. There's a fabulous watering hole on the ground floor of this condo. I have to go in there and steele myself up before I hit the beach to duke it out with that bunch.
That makes sense. Our Ash are dying right and left and much faster and sooner than they predicted. We don’t have Beech in northern Missouri so no problem there. Dutch Elm Disease has been killing elms for nearly a century yet there are still plenty of elms around because most live long enough to produce seeds. Just yesterday I saw ash that were maybe 3” dbh and too young to produce seeds. Ash may go the way of the American Chestnut.
There may be some isolated ashes that survive on their own. The Emerald Ash Borer may starve itself out of existence unless it finds an alternate host. There is also some research going on to develop tools for combatting the beetle. Here's the latest from the University of Minnesota:https://mitppc.umn.edu/news/entomopathogenic-fungi-may-be-key-biocontrol-emerald-ash-borer
We went on a cruise thru Carnival on the Mardi Gras ship at the end of January for 7 days. Stopped at Nassau Bahamas, Amber Cove and Grand Turk. Went with my sister and her family as well as other friends...was a blast hanging with family but don't think I would do another cruise like that.
After the cruise we went directly to PA to visit my father and the rest of the family. Hubby is from the same town and his family is still there as well. So it was busy visiting and trying to see everyone but I loved it.
Here are a few from the cruise as well as from one of the hikes we took in PA. I really didn't have much time in PA to get out and about. My dad is 87 and I was working on getting the VA to setup various benefits for him, so I was on the phone ALOT. But I have to say I just love the Butler PA VA center...they are amazing!
We went on a cruise thru Carnival on the Mardi Gra... (show quote)