Posts for: walkurie
Jul 14, 2021 07:11:13 #
Jul 13, 2021 14:25:00 #
$15.00 + shipping for both D7200 guides. $10.00 + shipping for the D5300.
Jul 9, 2021 07:07:45 #
SX2002 wrote:
Someone said to me that I was suffering with OCD... 
Please explain...
Please explain...
Old Clothes Dryer
May 11, 2021 07:30:50 #
I painted a solution of nitrogen triiodide on our garage door hinge pins and waited for my father to open the doors. Pins flew up and doors fell off. Needless to say my chemistry set was confiscated. Working as a chemist in R&D for over 35 years, but this was something I will always remember.
Apr 25, 2021 08:26:40 #
Apr 15, 2021 07:10:43 #
Reikan FoCal Pro great value and works well.
Apr 10, 2021 09:56:21 #
Is the Tamron still available? If so could you provide some pictures?
Thanks
Gary
Thanks
Gary
Feb 8, 2021 09:26:51 #
I have owned several tripods. If you want stability, you should expect to be in the $500+ range.
Good hunting
Gary
Good hunting
Gary
Dec 29, 2020 08:58:32 #
Authorized Photo Services, Morton Grove IL.
Nikon specialists. Just repaired my 80-200 mm. f2.8 af-s. 1 week turnaround.
Best of luck.
Nikon specialists. Just repaired my 80-200 mm. f2.8 af-s. 1 week turnaround.
Best of luck.
Aug 27, 2020 09:58:37 #
Both Meade and Celestron make affordable "Go To" telescopes. It all depends on the budget and features desired.
Feb 23, 2020 16:22:02 #
Ravelli APGL4 70” Vertical Pistol Grip Ball Head Tripod with Upgraded Carry Bag
The APGL4 is unique due to its vertical pistol grip tripod head.
Squeezing the pistol grip allows the user to set the desired camera position simply by moving their hand. Gripping the tripod head and squeezing the ball release lever with the fingers, releases the ball joint and allows movement of the head to any angle. Releasing grip locks head in current position.
The height of the tripod head is set by adjusting the legs and center column. At a given height, gripping the head then allows the user to change pan, tilt and angle.
In the vertical position, the tripod legs support the ball as well as the head, camera, and lens above. As the head is tilted forward and back or to the side, the user’s hand is supporting more and more of the weight.
The Pistol Grip has a tension adjustment screw to set tension to the weight of your equipment.
The APGL4 is a substantial tripod weighing over 8lbs.
Each tripod leg has two horizontal flip locks which can be opened at the same time with one hand. Each leg flip lock has a tension adjustment screw.
FEATURES:
• Vertical Pistol Grip Ball Head – The APGL4 uses a unique tripod head. Squeezing the pistol grip allows the user to set the desired camera position simply by moving their hand. This allows for rapid changes in camera orientation without adjusting any knobs and only requires one hand.
This tripod is not recommended for use with long or heavy lenses. This tripod is not recommended for level panning video.
• Substantial Tripod – Please note that this
tripod weighs over 8lbs (4kgs) and collapsed is 34”(86cm) long. The tripod legs and head are made primarily of relatively thick aluminum.
• Upgraded Carry Bag – The APGL4 comes with a carry bag that uses 1680D Ballistic Nylon material and 8mm zippers. The bag includes two carry handles, a carry strap and a side pocket.
• Gearless Reversible Center Column and
High-Density Foam Grips – The center column is gearless, allowing for quick height adjustment. Each end of the center column has a 3/8” mounting post, allowing tripod heads to be mounted in the normal position or inverted.
Two of the three tripod legs are wrapped in
high-density foam grips for textile and thermal comfort.
• Quick Release Plate with Safety Button and Rubber/Spiked Tripod Feet – The quick release plate has both a screw lock and a safety button. Pressing the safety button is an additional required step to fully release the camera plate, providing additional security against accidental slide off. The rubber feet are retractable exposing metal spikes for use in alternate terrain.
SPECIFICATIONS:
Maximum Height: 70"
Minimum Height: 23”
Minimum Height with legs Inverted: 0“
Collapsed/Storage Height: 34”
Leg Sections: 3
Camera Screw Size: 1/4" 20
Max Load Capacity: 17lbs
Leg Diameter: 1”/30mm
Weight: 8lbs
Lightly used. $40.00, shipping included.
The APGL4 is unique due to its vertical pistol grip tripod head.
Squeezing the pistol grip allows the user to set the desired camera position simply by moving their hand. Gripping the tripod head and squeezing the ball release lever with the fingers, releases the ball joint and allows movement of the head to any angle. Releasing grip locks head in current position.
The height of the tripod head is set by adjusting the legs and center column. At a given height, gripping the head then allows the user to change pan, tilt and angle.
In the vertical position, the tripod legs support the ball as well as the head, camera, and lens above. As the head is tilted forward and back or to the side, the user’s hand is supporting more and more of the weight.
The Pistol Grip has a tension adjustment screw to set tension to the weight of your equipment.
The APGL4 is a substantial tripod weighing over 8lbs.
Each tripod leg has two horizontal flip locks which can be opened at the same time with one hand. Each leg flip lock has a tension adjustment screw.
FEATURES:
• Vertical Pistol Grip Ball Head – The APGL4 uses a unique tripod head. Squeezing the pistol grip allows the user to set the desired camera position simply by moving their hand. This allows for rapid changes in camera orientation without adjusting any knobs and only requires one hand.
This tripod is not recommended for use with long or heavy lenses. This tripod is not recommended for level panning video.
• Substantial Tripod – Please note that this
tripod weighs over 8lbs (4kgs) and collapsed is 34”(86cm) long. The tripod legs and head are made primarily of relatively thick aluminum.
• Upgraded Carry Bag – The APGL4 comes with a carry bag that uses 1680D Ballistic Nylon material and 8mm zippers. The bag includes two carry handles, a carry strap and a side pocket.
• Gearless Reversible Center Column and
High-Density Foam Grips – The center column is gearless, allowing for quick height adjustment. Each end of the center column has a 3/8” mounting post, allowing tripod heads to be mounted in the normal position or inverted.
Two of the three tripod legs are wrapped in
high-density foam grips for textile and thermal comfort.
• Quick Release Plate with Safety Button and Rubber/Spiked Tripod Feet – The quick release plate has both a screw lock and a safety button. Pressing the safety button is an additional required step to fully release the camera plate, providing additional security against accidental slide off. The rubber feet are retractable exposing metal spikes for use in alternate terrain.
SPECIFICATIONS:
Maximum Height: 70"
Minimum Height: 23”
Minimum Height with legs Inverted: 0“
Collapsed/Storage Height: 34”
Leg Sections: 3
Camera Screw Size: 1/4" 20
Max Load Capacity: 17lbs
Leg Diameter: 1”/30mm
Weight: 8lbs
Lightly used. $40.00, shipping included.
Feb 4, 2020 16:08:47 #
Added the.com and sent the $3.00
Regards
Gary Campbell
1 Discovery Drive
Swiftwater, PA 18370
Regards
Gary Campbell
1 Discovery Drive
Swiftwater, PA 18370
Feb 4, 2020 15:36:01 #
Larry,
PayPal does not recognize the address.
Is there a domain name (.com or net etc) associated with the account?
Regards
Gary
PayPal does not recognize the address.
Is there a domain name (.com or net etc) associated with the account?
Regards
Gary
Feb 4, 2020 12:01:36 #
Sold. Send me your preferred payment method.
Regards
Gary
Regards
Gary
Jan 24, 2020 16:27:15 #
Ravelli APGL4 70” Vertical Pistol Grip Ball Head Tripod with Upgraded Carry Bag
The APGL4 is unique due to its vertical pistol grip tripod head.
Squeezing the pistol grip allows the user to set the desired camera position simply by moving their hand. Gripping the tripod head and squeezing the ball release lever with the fingers, releases the ball joint and allows movement of the head to any angle. Releasing grip locks head in current position.
The height of the tripod head is set by adjusting the legs and center column. At a given height, gripping the head then allows the user to change pan, tilt and angle.
In the vertical position, the tripod legs support the ball as well as the head, camera, and lens above. As the head is tilted forward and back or to the side, the user’s hand is supporting more and more of the weight.
The Pistol Grip has a tension adjustment screw to set tension to the weight of your equipment.
The APGL4 is a substantial tripod weighing over 8lbs.
Each tripod leg has two horizontal flip locks which can be opened at the same time with one hand. Each leg flip lock has a tension adjustment screw.
FEATURES:
• Vertical Pistol Grip Ball Head – The APGL4 uses a unique tripod head. Squeezing the pistol grip allows the user to set the desired camera position simply by moving their hand. This allows for rapid changes in camera orientation without adjusting any knobs and only requires one hand.
This tripod is not recommended for use with long or heavy lenses. This tripod is not recommended for level panning video.
• Substantial Tripod – Please note that this
tripod weighs over 8lbs (4kgs) and collapsed is 34”(86cm) long. The tripod legs and head are made primarily of relatively thick aluminum.
• Upgraded Carry Bag – The APGL4 comes with a carry bag that uses 1680D Ballistic Nylon material and 8mm zippers. The bag includes two carry handles, a carry strap and a side pocket.
• Gearless Reversible Center Column and
High-Density Foam Grips – The center column is gearless, allowing for quick height adjustment. Each end of the center column has a 3/8” mounting post, allowing tripod heads to be mounted in the normal position or inverted.
Two of the three tripod legs are wrapped in
high-density foam grips for textile and thermal comfort.
• Quick Release Plate with Safety Button and Rubber/Spiked Tripod Feet – The quick release plate has both a screw lock and a safety button. Pressing the safety button is an additional required step to fully release the camera plate, providing additional security against accidental slide off. The rubber feet are retractable exposing metal spikes for use in alternate terrain.
SPECIFICATIONS:
Maximum Height: 70"
Minimum Height: 23”
Minimum Height with legs Inverted: 0“
Collapsed/Storage Height: 34”
Leg Sections: 3
Camera Screw Size: 1/4" 20
Max Load Capacity: 17lbs
Leg Diameter: 1”/30mm
Weight: 8lbs
Lightly used. $40.00, shipping included.
The APGL4 is unique due to its vertical pistol grip tripod head.
Squeezing the pistol grip allows the user to set the desired camera position simply by moving their hand. Gripping the tripod head and squeezing the ball release lever with the fingers, releases the ball joint and allows movement of the head to any angle. Releasing grip locks head in current position.
The height of the tripod head is set by adjusting the legs and center column. At a given height, gripping the head then allows the user to change pan, tilt and angle.
In the vertical position, the tripod legs support the ball as well as the head, camera, and lens above. As the head is tilted forward and back or to the side, the user’s hand is supporting more and more of the weight.
The Pistol Grip has a tension adjustment screw to set tension to the weight of your equipment.
The APGL4 is a substantial tripod weighing over 8lbs.
Each tripod leg has two horizontal flip locks which can be opened at the same time with one hand. Each leg flip lock has a tension adjustment screw.
FEATURES:
• Vertical Pistol Grip Ball Head – The APGL4 uses a unique tripod head. Squeezing the pistol grip allows the user to set the desired camera position simply by moving their hand. This allows for rapid changes in camera orientation without adjusting any knobs and only requires one hand.
This tripod is not recommended for use with long or heavy lenses. This tripod is not recommended for level panning video.
• Substantial Tripod – Please note that this
tripod weighs over 8lbs (4kgs) and collapsed is 34”(86cm) long. The tripod legs and head are made primarily of relatively thick aluminum.
• Upgraded Carry Bag – The APGL4 comes with a carry bag that uses 1680D Ballistic Nylon material and 8mm zippers. The bag includes two carry handles, a carry strap and a side pocket.
• Gearless Reversible Center Column and
High-Density Foam Grips – The center column is gearless, allowing for quick height adjustment. Each end of the center column has a 3/8” mounting post, allowing tripod heads to be mounted in the normal position or inverted.
Two of the three tripod legs are wrapped in
high-density foam grips for textile and thermal comfort.
• Quick Release Plate with Safety Button and Rubber/Spiked Tripod Feet – The quick release plate has both a screw lock and a safety button. Pressing the safety button is an additional required step to fully release the camera plate, providing additional security against accidental slide off. The rubber feet are retractable exposing metal spikes for use in alternate terrain.
SPECIFICATIONS:
Maximum Height: 70"
Minimum Height: 23”
Minimum Height with legs Inverted: 0“
Collapsed/Storage Height: 34”
Leg Sections: 3
Camera Screw Size: 1/4" 20
Max Load Capacity: 17lbs
Leg Diameter: 1”/30mm
Weight: 8lbs
Lightly used. $40.00, shipping included.
