My computer cannot find (recognize) my Memory Card.
Oct 11, 2023 18:40:40 #
I'll give that a try. I put a brand new MC in the computer but the computer didn't read it, but I didn't format that new MC either, but thanks for the suggestion. I'll give that a try. I would never waste spirits on an MC card. I'm not that desperate. LOL
Oct 11, 2023 20:52:11 #
I've never had luck getting an SD card to show up in my computer, so what I do is attach the camera directly to it with a mini-usb cable. Boot up the camera once it's connected to a usb port. No harm in trying.
Oct 12, 2023 03:15:12 #
Oct 12, 2023 14:59:30 #
Oct 13, 2023 08:18:15 #
I put the MC in a "reader" I think it is called, then plugged the reader into another USB port on my computer and downloaded it like that. A circuitous route but I can view the images now.
Oct 13, 2023 08:52:37 #
moosus wrote:
I put the MC in a "reader" I think it is called, then plugged the reader into another USB port on my computer and downloaded it like that. A circuitous route but I can view the images now.
Hooray!
Oct 13, 2023 11:15:34 #
therwol
Loc: USA
moosus wrote:
I put the MC in a "reader" I think it is called, then plugged the reader into another USB port on my computer and downloaded it like that. A circuitous route but I can view the images now.
Get all of the pictures off of that card. Start over with a new one, formatted in the camera. Just a thought.
Oct 13, 2023 13:36:50 #
Oct 13, 2023 13:37:16 #
therwol wrote:
Get all of the pictures off of that card. Start over with a new one, formatted in the camera. Just a thought.
Wil-co
Oct 13, 2023 14:14:09 #
Oct 15, 2023 15:06:33 #
Urnst
Loc: Brownsville, Texas
moosus wrote:
I'm not sure where to post this so I guess admin. ... (show quote)
I have the same problem but none of the suggestions offered here solved it. Apparently something is wrong with my computer. CAn this be repaired and if so how expensive would the repair be? Thanks'
Oct 15, 2023 15:39:55 #
Urnst wrote:
tI have the same problem but none of the suggestions offered here solved it. Apparently something is wrong with my computer. CAn this be repaired and if so how expensive would the repair be? Thanks'
In my original post, I mentioned the same day I had trouble with my computer not initiating my Nikon d7200 prompt to import, I eventually discovered all the images in the slideshow feature in Photos were enlarged so that the top and bottom parts of the images were cut off. I think this was caused by a Microsoft update. I finally put the MC in a "card reader" (I think it's called) that I use with my laptop and then plugged the reader into a USB port on my computer and finally the computer showed the Nikon d7200 prompt in the "External Devices" on the left sidebar and in the bar on top where it always showed up before, allowing me to import the images off the MC. There were a lot of suggestions and I tried various ones and kept banging around until I stumbled upon this fix. Hope this helps. MM
Oct 15, 2023 15:53:23 #
Urnst
Loc: Brownsville, Texas
moosus wrote:
t br ... (show quote)
Thanks. I went round and round with MS before agreeing with them that I had a hard ware issue.
Oct 15, 2023 18:28:31 #
FrankN
Loc: Maryland, USA
My Dell Inspiron periodically will not recognize memory cards and/or USB flash drives.
In my case this appears to be related to my use of a USB hub. If I shut down the PC and disconnect the hub, then reboot and plug in the card reader directly to a USB port on the PC (not using the hub at all) after the reboot is complete, the PC will recognize the card.
I realize this is somewhat different from your scenario, but it might be helpful.
In my case this appears to be related to my use of a USB hub. If I shut down the PC and disconnect the hub, then reboot and plug in the card reader directly to a USB port on the PC (not using the hub at all) after the reboot is complete, the PC will recognize the card.
I realize this is somewhat different from your scenario, but it might be helpful.
Oct 15, 2023 18:34:23 #
Urnst
Loc: Brownsville, Texas
FrankN wrote:
My Dell Inspiron periodically will not recognize memory cards and/or USB flash drives.
In my case this appears to be related to my use of a USB hub. If I shut down the PC and disconnect the hub, then reboot and plug in the card reader directly to a USB port on the PC (not using the hub at all) after the reboot is complete, the PC will recognize the card.
I realize this is somewhat different from your scenario, but it might be helpful.
In my case this appears to be related to my use of a USB hub. If I shut down the PC and disconnect the hub, then reboot and plug in the card reader directly to a USB port on the PC (not using the hub at all) after the reboot is complete, the PC will recognize the card.
I realize this is somewhat different from your scenario, but it might be helpful.
Thanks
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.