Weddingguy wrote:
The purpose of bracket is to keep the source of light higher than the lens resulting in shadows falling more down and behind the subject than beside it. They work . . . with two caveats . . .
1) it does not change the harsh quality of the light from the flash . . .
2) it creates a very uncomfortable, unbalanced combination of camera/flash because of the weight of the flash being so far away from the camera. This is especially tiring when carried for hours at an event.
I have used several different models, all of which basically accomplish the same thing. I stopped using them about 10 years ago when I discovered the Lite-Scoops from Lite Genius. They keep the light source higher than the lens in both portrait and landscape modes . . keeps the flash in the hot shoe, so stays better balanced . . weighs about 60 grams . . improves the spectral highlights and softens shadows . . does not require a flash cord . . and costs about the same as a good bracket.
How's that for a rambling commercial???
Of course that is just my humble opinion.
The purpose of bracket is to keep the source of li... (
show quote)
Confusing......
Are you talking about flash brackets?
We're (most of us) are talking about L-brackets.
I use mine all the time. I have two camera bodies and each one has a "L" bracket. On every camera body I ever owned had a "L" bracket on it. You may not switch form H to V very often, but when needed, it is a simple switch.
I have them on both my digitals, love them. Gives a much more stable platform then moving the tripod head where the camera is hanging off the side of the head especially when I do macro where I also have a heavy focusing rail attached to the head. Also gives some protection to the camera.
grandpaw wrote:
Don't know how often I would use an "L" bracket but I am considering purchasing one. Anything to look out for other than the access to ports on the left side of the camera and access to battery compartment. Recommendations for use on a Nikon D500 or D600.
I thought I put this in the discussion forum and put it here by mistake. Is there a way for me to delete this and repost in the correct form?
I have an L-bracket on every camera. I always keeps the center mass of the camera over the central axis of the tripod unless of course you have a long lens with its only footplate attacked. If you have ever had a camera-lens combo tip over whether or not it is in the wind, you would understand.
rubble43
Loc: Oyster Bay, Long Island NY
I have L-brackets on both my Nikon D800 and D850; both are made by Sunwayfoto and are reasonably priced. I use a tripod quite often for panos and HDR photos and find the ability to quickly go from landscape to portrait orientation (aided by the QC mount) most useful. I use U-ring 1/4-20 screws to hold the brackets to the camera so I can quickly adjust or remove them without use of a hex wrench. With the bracket slipped to the left they also provide a grip for my left hand when carrying the camera..
rubble43 wrote:
I have L-brackets on both my Nikon D800 and D850; both are made by Sunwayfoto and are reasonably priced. I use a tripod quite often for panos and HDR photos and find the ability to quickly go from landscape to portrait orientation (aided by the QC mount) most useful. I use U-ring 1/4-20 screws to hold the brackets to the camera so I can quickly adjust or remove them without use of a hex wrench. With the bracket slipped to the left they also provide a grip for my left hand when carrying the camera..
I have L-brackets on both my Nikon D800 and D850; ... (
show quote)
Also, many cameras now include clips that attach to an L-bracket to fix cables in position.
I have a Really Right Stuff L Bracket. It's great.
Make sure you get the one that fits your particular camera model - or it may get in the way of connections/compartments.
I found that not all plates may not accept your L bracket.
I keep the RRS bracket on my D810 24/7 and it is worth every penny.
I really like the one I got from Sunwayfoto, it fits my camera and the arca swiss plate on my tripod head perfectly. They have one here
http://www.sunwayfoto.com/e_goodsDetail.aspx?gId=1202 that would fit the camera you were asking about. I find it invaluable shooting panoramas since I shoot them in portrait orientation.
always...........I prefer RRS as it's made in the USA, and because it's quality fit and finish is worth it to me.........
I have one and have it handy when I am taking my tripod along. Very convenient for portrait orientation images. Especially great when you are doing a panorama with multiple portrait oriented image shots. Worth the money.
I had bought one about five years ago. I have used it once perhaps twice. It was too clunky and complex to rotate the camera and flash. With all the things necessary to get a good shot off. So I really don't use it at all. I prefer a tripod or monopod. You could buy a TTL cable and use it exclusive of the bracket when you don't want flash shadows. I have thought that I could use my "L" bracket for beating people into submission for not smiling. Okay, I'm kidding. Save the 30 dollars or more for something else.
The topic is L bracket not flash brackets...
Scruples wrote:
I had bought one about five years ago. I have used it once perhaps twice. It was too clunky and complex to rotate the camera and flash. With all the things necessary to get a good shot off. So I really don't use it at all. I prefer a tripod or monopod. You could buy a TTL cable and use it exclusive of the bracket when you don't want flash shadows. I have thought that I could use my "L" bracket for beating people into submission for not smiling. Okay, I'm kidding. Save the 30 dollars or more for something else.
I had bought one about five years ago. I have used... (
show quote)
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.