How do I attach wires to this little thing.
Jan 23, 2024 08:23:16 #
BebuLamar wrote:
I give up because I found the chip mounted on the PCB with some other components and I ordered them. Check the post just before Jerry post.
Good result.
Jan 23, 2024 09:05:05 #
jerryc41 wrote:
Good result.
Yeah the board is less than $7 each and it cost $18 to ship it from Canada so I ordered 3 of them. I hate it when the cost of the item is less than the shipping cost. I bought 10 of the chips alone and it costs me $13 with $10 shipping from within Texas. The chip is only $1.30 each.
Jan 23, 2024 09:15:21 #
BebuLamar wrote:
Yeah the board is less than $7 each and it cost $18 to ship it from Canada so I ordered 3 of them. I hate it when the cost of the item is less than the shipping cost. I bought 10 of the chips alone and it costs me $13 with $10 shipping from within Texas. The chip is only $1.30 each.
I hate it when they add the same shipping charge for multiple items. It's the original package and postage that costs a lot. Adding one more tiny item doesn't increase the cost at the post office.
Jan 23, 2024 10:19:45 #
Jan 23, 2024 11:13:09 #
Lost Again
Loc: Middle of nowhere Oregon
Wyantry wrote:
This is not a good idea because there may not be a good ELECTRICAL Connection.
Get glue under any wire—>pad contact, and NO CONTACT.
Epoxy is an INSULATOR !
Get glue under any wire—>pad contact, and NO CONTACT.
Epoxy is an INSULATOR !
Another good point. Thanks for the info.
Jan 31, 2024 21:17:16 #
Well I gave up on trying to attach wires to that sensor. I found an outfit in Canada selling the same sensor mounted on a small circuit board with some components to convert to current output to voltage output.
The circuilt board works very well.
Here is a picture of the ciruit board and the sensor alone. The circuit board has a small connector to plug the cable in.
The circuilt board works very well.
Here is a picture of the ciruit board and the sensor alone. The circuit board has a small connector to plug the cable in.
Feb 1, 2024 07:20:42 #
BebuLamar wrote:
Well I gave up on trying to attach wires to that sensor. I found an outfit in Canada selling the same sensor mounted on a small circuit board with some components to convert to current output to voltage output.
The circuilt board works very well.
Here is a picture of the ciruit board and the sensor alone. The circuit board has a small connector to plug the cable in.
The circuilt board works very well.
Here is a picture of the ciruit board and the sensor alone. The circuit board has a small connector to plug the cable in.
Success!
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.