Be Careful inserting & removing your SD cards....
Long live CF cards! OOPs guess they’re already dead. Too bad. Although bent pins are an occasional problem I think they’re just built better.
Dngallagher wrote:
Never blamed the card.
There are some really tough people on UHH.
Smile,
JimmyT Sends
That is the reason that I almost never remove the card from my cameras, instead using the cable to load images from the camera to computer. I know it's a little slower and uses battery power, that doesn't bother me. The exception would be if I shoot many hundreds of photos , then I'll use a card reader or plug the card directly into the computer.
nimbushopper wrote:
That is the reason that I almost never remove the card from my cameras, instead using the cable to load images from the camera to computer. I know it's a little slower and uses battery power, that doesn't bother me. The exception would be if I shoot many hundreds of photos , then I'll use a card reader or plug the card directly into the computer.
I was gonna say unless you have a full 128GB card...by cord. You can go on vacation and you will need to take a different camera. When you get back, the download on the first camera "should" be ready shortly.;~)
Thank you for sharing! Very valuable info and I will check my cards today. so glad you were able to identify the problem.
I guess that's one reason to use a USB cable.
Thanks. I never think of things like that.
Thanks for the heads up Don!! I'm usually careful, but I appreciate the info.
Mark
Bear123
Loc: Wild & Wonderful West Virginia
Thanks for the info. Will check my cards more closely now.
Dngallagher wrote:
FWIW - Yesterday noticed my 90D camera's SD card door was harder to slide and it no longer sprung open as it normally did. It still opened, but was noticably harder to open. The day before when I inserted my SD card after transferring some files it was a little difficult to insert, but eventually went in OK.
This morning I looked closer at the door hinge points and saw something odd sticking out of one side. I was able to use a pair or needle nose pliers to grab it and pull it out with a little effort.
The SD card door went back to normal easy operation and sprung open as usual. Turns out during the card insert the previous night I had broken off a piece of plastic above the lock switch on the card.
Luckily for me it had lodged in the door hinge where the spring goes into the body and had not fallen inside the card slot.
FWIW - Yesterday noticed my 90D camera's SD card d... (
show quote)
Wow, glad all worked out OK, will strive to remember your issue when inserting and removing my SD Cards. Thanks
Regardless of fault this was a good reminder. I think we all tend to force things, even unintentionally, when hurrying. I will endeavor to be more careful in the future, that’s for sure.
47greyfox
Loc: on the edge of the Colorado front range
I've had card readers, computers, and (maybe even) cameras that use a metal sleeve to ensure proper alignment when inserting cards. Unless the user is careful, the edge of the metal sleeve can nick the card as it's being inserted, especially if there's any kind of gap between the top of the sleeve and the body slot. Granted, I've never had an issue except for an occasional repositioning of the lock tab on the side. Pleased to hear this instance ended up okay.
Lucky you ! Thanks for the tip
Dngallagher wrote:
FWIW - Yesterday noticed my 90D camera's SD card door was harder to slide and it no longer sprung open as it normally did. It still opened, but was noticably harder to open. The day before when I inserted my SD card after transferring some files it was a little difficult to insert, but eventually went in OK.
This morning I looked closer at the door hinge points and saw something odd sticking out of one side. I was able to use a pair or needle nose pliers to grab it and pull it out with a little effort.
The SD card door went back to normal easy operation and sprung open as usual. Turns out during the card insert the previous night I had broken off a piece of plastic above the lock switch on the card.
Luckily for me it had lodged in the door hinge where the spring goes into the body and had not fallen inside the card slot.
FWIW - Yesterday noticed my 90D camera's SD card d... (
show quote)
Yes. Be very careful. My XQD card lodged in my Z7. Nikon repair had to remove it. Sony eventually replaced the broken card.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.