authorizeduser wrote:
I have the Canon 80D. I only have one Canon battery and would like another battery. The Canon is quite expensive and I will pay it if need be. Anyone have experiences with Watson or Wasabi batteries? Not worth saving 50% if they do not work as well as a real Canon battery. I am asking here as I do not trust reviewers to tell the absolute truth since they are being compensated ...........
Thanks
My experience with Wasabi batteries is that they don't seem to hold a charge for quite as long as the OEM battery, but close enough for what I do. They lasted three years before needing to be replaced. Saved a whole lot of money for a small loss in run time, but since I got two batteries and a charger, it was well worth it.
gmccaleb1 wrote:
I am planning to sell my film Canon AE-1 and have a 135mm lens, I used to enjoy using some 30 years ago. I just purchased a used Canon 5d Mark 1 and wonder if an adapter would be worthwhile and worth the cost to be able to use the lens. I also had a 50 mm for the 5d.
I asked your advice some time ago about upgrading my Nikon d7100 to a d750 due to the noise I was getting in low light. I am very happy to say, I upgraded and love it!! The difference in noise is unbelievable! I also got a stellar deal through Adorama buying a demo for $800. I am so very happy with their service and the quality of the equipment. I got the 5d Mark 1 or $269. I shoot mainly portraits of my grandchildren and landscapes.
I attempted research on the lens and an adapter , but my knowledge is limited and I knew you guys would know best.
Thanks again for all your wonderful advice!
I am planning to sell my film Canon AE-1 and have ... (
show quote)
I have purchased some old lenses and adapters to fit my current Canon DSLRs, but I haven't found getting an adapter for an old FD mount Canon lens to be worth it. You'll lose some quality through the adapter since it has to have a piece of glass to be able to focus to infinity. The alternative is to have the mount modified to fit your 5D MK 1.
If you get a mirrorless camera on the future, the old Canon lens should work with an adapter that doesn't have any glass in the way.
greymule wrote:
Why does one use irfanview?
What is good for?
Is it worth the disc space?
I've used it for years. Doesn't take much disc space. Handy for previewing / cropping / basic stuff like adjusting brightness, contrast, and being able to resize a photo. Really nice program for $0, and pretty fast.
whitehall wrote:
Am I having an issue with focusing.
I am shooting BIF. CANON 7d mk ii Tamron 150-600 G2. Back focus using a center focus extended.
I am having a problem locking on. Though the focus points are on the bird, when Look at the image in review, I see a single focus but not on the bird.
This seems to happen even if I shoot a stationary object but in that case the image is sharp.
Should the focus point in review be the same as when shooting.
Thanks.
On my 7D, I typically use large zone focus area to help it track.
Also, check your menu under Autofocus/Drive.
Look for:
AI Servo tracking sensitivity - Mine's currently set to 0 (middle).
AI Servo 1st/2nd img priority - Mine's currently set to AF priority / Tracking priority)
AI Servo tracking method - Mine's set to Main Focus point priority
Yours may differ some since it's the newer version, but those or something very similar are probably on yours, too. Mine misses occasionally, but most of the time I can capture a heron as it flies away and it'll track it on all or most shots.
kenrich53 wrote:
I happened to log onto my account with Canon at their website to make sure all of my items were registered. What I found out was that my items were no longer registered. I placed a call to Canon and was told that they had a got a new system and that a lot of items didn't cross over to their new system. You might want to check your account to make sure your gear is registered so that you are notified of updates for your gear. I had to dig through all of my receipts to find out when and where I had purchased all of my gear.
I happened to log onto my account with Canon at th... (
show quote)
My two lenses I bought new are listed, but not my T3. Maybe they dropped that because it's so old? Hmmm....
boberic wrote:
Get real. A Lens Band sells for about 5 bucks. How much is way less? BTW any one who is concerned with spending $5, should get another thing to do, other than photography.
Considering you can get several for a bit more than $5, I'd say that's quite a real difference. BTW, nice attitude. Go get a life.
Robdale wrote:
I have Canon zoom lens that has developed lens creep. Any suggestions would be helpful. Has anyone used the product Lens Band? Thanks
Search Amazon.com for "rubber wristbands". You can get several for way less than a Lens Band will cost.
benjismiller wrote:
Hi guys. Just looking for some ideas really. I have a Panasonic Lumix FZ200 and for Christmas I was gifted a lovely solid tripod. I haven't been taking many pictures of late and want to try something new. I will do a few car shows probably but as something more general I was thinking maybe landscapes or macro to put the tripod to use. Any other suggestions welcomed. Just want to use my camera to its strengths. TIA
Anything that requires a steady hand should require a tripod: slow-motion action, low light situations, macro, and time exposure shots like slick waterfalls or streaking clouds.
I couldn't figure out what to do with .pas files. How does this work? I ended up downloading something from that video someone posted a few days ago and it worked.
LITTLEBIT wrote:
Is there a way to find out the Shutter Count on a Canon EOS T5i Camera? I want to sale my camera which hasn’t been used much at all and would like to report this if it’s possible.
Someone posted this link a few days ago to a video with detailed instructions. It worked on both my T3 and 7D.
https://www.youtube.com/watch?v=Fec5A8T1RXA
This works on both my 7D and T3. The one I had been using seems to have forgotten how to do that, so I'm using this one now. Thanks!
tgreenhaw wrote:
ClarkG is right on, you need to use HDR. Most modern cameras have this built in now. I highly recommend using a tripod so when the camera combines the different shots for different exposures that it lines up well.
On my Canon, I have HDR settings I like programmed into C3 for convenience.
Brilliant! I hadn't thought of that.
RRiggins wrote:
This is definitely a broken shutter blade. DO NOT FIRE THE CAMERA FURTHER! This is a sure way to damage the low pass filter in front of the image sensor. I replace these all the time and recognize the familiar v shaped light pattern of the broken blade.
Hi. My name is Rick. I’m the owner and lead technician at Discount Camera Repair and a member in good standing here at the UHH. I’ve been doing repairs for other members here at greatly reduced rates and would be glad to help.
I'd be more than happy to repair the camera for you and keep the cost as low as possible. If you’re interested, please respond by private message.
This is definitely a broken shutter blade. DO NOT ... (
show quote)
I stand corrected. Didn't seem like it would be a shutter issue, but what else would cause that anyway, huh? So, I learned something today. Glad you can take care of his shutter issue.