Check out Commercial and Industrial Photography section of our forum.
Epson R1900
Mar 21, 2019 10:10:09 #
Hi All,
I have a Epson R1900 and have used it very successfully for years. Due to a number of reasons have not used the printer for at least a year...
I want to start using it again...what would be my best method of cranking this printer up to print images
again?
All advice appreciated.
Thanks,
Bert
I have a Epson R1900 and have used it very successfully for years. Due to a number of reasons have not used the printer for at least a year...
I want to start using it again...what would be my best method of cranking this printer up to print images
again?
All advice appreciated.
Thanks,
Bert
Mar 21, 2019 11:09:58 #
jeryh
Loc: Oxfordshire UK
ind her up. and see what it says on start up; you will probably need to clean the heads, at the very least. But unless you switch icon, you won't find out !
Mar 21, 2019 11:17:29 #
Check out Wedding Photography section of our forum.
Mar 22, 2019 07:15:54 #
Mar 22, 2019 09:34:55 #
I have two Epson printers. According to Epson for long term storage you leave the ink cartridges in the printer. When ready to print again just run the head cleaning utility. I had one in storage for over 2 years with the ink cartridges still in the printer. I just cleaned the heads and printed perfectly again. Good Luck!
Mar 22, 2019 09:38:51 #
Mar 22, 2019 12:24:46 #
If you had no problem when you turned it off, simply turn it on, clean the heads and print your photos.
Mar 22, 2019 12:41:11 #
Mar 22, 2019 12:54:11 #
Mar 22, 2019 12:58:24 #
Mar 22, 2019 13:01:30 #
Check out Black and White Photography section of our forum.
Mar 22, 2019 13:11:15 #
Vincejr
Loc: Northern Kentucky
My printer heads dried out and I couldn't clean them out maybe if I ran a few gallons of ink though it
Mar 22, 2019 13:40:31 #
That’s why Epson says to keep your ink cartridges in the printer for storage. Removing the cartridges results in the printer heads drying out.
Vincejr wrote:
My printer heads dried out and I couldn't clean them out maybe if I ran a few gallons of ink though it
Mar 22, 2019 13:42:16 #
Change the oil, check the air in the tires, you might need jumper cables. Then just test it. It’s likely the heads will need a good cleaning and maybe some alignment. Should be good to go.
Oh yeah, make sure you change the muffler bearing. 😜
Oh yeah, make sure you change the muffler bearing. 😜
Mar 22, 2019 13:46:39 #
Vincejr
Loc: Northern Kentucky
I don't recommend an Epson printer to anyone that doesn't print once every day once a week if you want to let it sit there longer than that before between printing don't get an Epson
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Check out Panorama section of our forum.