I recently purchased the Godox V860iiN (Nikon). My initial attempts to fire the flash through the PW Mini and flex system failed. Doe/ anyone else have experience with this set up. Specifically, I have the flash on a PW Flex (Nikon) and a PW Mini (Nikon) on my Nikon 810. The flex and Mini communicate with each other until I fire the flash. When I press the shutter, the communication lights on the flex and Mini flash red.
All comments/suggestions are greatly appreciated.
NHinote wrote:
I recently purchased the Godox V860iiN (Nikon). My initial attempts to fire the flash through the PW Mini and flex system failed. Doe/ anyone else have experience with this set up. Specifically, I have the flash on a PW Flex (Nikon) and a PW Mini (Nikon) on my Nikon 810. The flex and Mini communicate with each other until I fire the flash. When I press the shutter, the communication lights on the flex and Mini flash red.
All comments/suggestions are greatly appreciated.
Just to eliminate this issue, you have the speedlight in normal mode, not any of the remote or transmitter modes, right?
See
this video at about 2:40
Why not get a Godox transmitter to use with the receiver that’s already built into the 860?
(I know, I know: you already have the PW’s, but the
Godox pro transmitter is a dream to use and will do Auto-FP, second curtain, TTL, manual, 32 channels in 16 groups... great system!)
Will the XproN work with the sb910 on a X1R N?
NHinote wrote:
Will the XproN work with the sb910 on a X1R N?
I've used the X1R-N with the SB 910 and the SB5000.
Should work with any modern Nikon speedlight.
Just leave the speedlights in TTL and use the Godox system to set to your preference..
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.