Is there an online photo print supplier that will do a 9x16 print? All I have found online are the standard photo sizes. I have two photos that I have sized in LR to 9x16 that looks best in this size and would like to get prints made. Thanks, Barbara
Order your images to the size you've specified but on a 11 x 17 page then trim them to size.
That's my WAG
Good luck
twowindsbear wrote:
Order your images to the size you've specified but on a 11 x 17 page then trim them to size.
That's my WAG
Good luck
I was thinking along those lines, but wasn't sure of myself. Thanks Barbara
twowindsbear wrote:
Order your images to the size you've specified but on a 11 x 17 page then trim them to size.
That's my WAG
Good luck
Simplest.
Even if a place (I talked to one UPS outlet that also did printing) has a large printer and can print any size up to xxx, someone would have to trim it.
LittleRiver wrote:
Is there an online photo print supplier that will do a 9x16 print? All I have found online are the standard photo sizes. I have two photos that I have sized in LR to 9x16 that looks best in this size and would like to get prints made. Thanks, Barbara
Two suggestions. Find a local camera club and find a member who has a large printer that can do it for you.
Second, go to FedEx office, they can print it for you.
TriX
Loc: Raleigh, NC
Bay Photo will print a 9x16
Send the pictures and address on a PM I'll send then out in 2 days. I have a new Canon 13 x 19 coming today, what paper would you like fine art, museum etching. matte, semi gloss, or gloss. Cost just help someone for free pass it on, anGODbless
revhen
Loc: By the beautiful Hudson
twowindsbear wrote:
Order your images to the size you've specified but on a 11 x 17 page then trim them to size.
That's my WAG
Good luck
Or 13x19 and trim. Whoops. While writing this someone even offered to print and trim at this size. Great minds . . . .
twowindsbear wrote:
Order your images to the size you've specified but on a 11 x 17 page then trim them to size.
That's my WAG
Good luck
Wouldn't that require cutting away part of the picture, since it wouldn't be printed 9 x 16?
This place looks like they'd print it for $16.90.
http://www.epingo.com/Pro_photoprints.aspx
revhen
Loc: By the beautiful Hudson
Take 2" off 11" and you have 9". Take 1" off 17" and you have 16". Voila! All you have to do is set the print at 9x16 borderless and center on the 11x17 sheet or the 13x19 (you'd have to trim more off but still have the whole picture).
revhen wrote:
Take 2" off 11" and you have 9". Take 1" off 17" and you have 16". Voila! All you have to do is set the print at 9x16 borderless and center on the 11x17 sheet or the 13x19 (you'd have to trim more off but still have the whole picture).
If you put the image along 2 sides instead of centering, you just need to make 2 cuts instead of 4. Since you will have the image against the edge, you will know where to start your cut.
revhen
Loc: By the beautiful Hudson
GoofyNewfie wrote:
If you put the image along 2 sides instead of centering, you just need to make 2 cuts instead of 4. Since you will have the image against the edge, you will know where to start your cut.
Sure. ABSOLUTELY. But I find that some printers don't print exactly where you tell them to. Thus it's safer to print toward the middle. You can only find out by trying.
revhen wrote:
Sure. ABSOLUTELY. But I find that some printers don't print exactly where you tell them to. Thus it's saver to print toward the middle. You can only find out by trying.
Good point if you're sending it out!
In the print module set up a 11x17 or whatever background and center your 9x16 in it. Then set print to jpg and there you go. I would get you more detailed instructions but I am sitting down stairs in my jamies and it has been a while since I did something like that. Being cheap I have set up templates like that for 8x10 and 8x12 in 11x14 with black background. Have them mounted on foam board slap precut mat on them and put in a metal 11x14 frame.
revhen
Loc: By the beautiful Hudson
GoofyNewfie wrote:
Good point if you're sending it out!
But I'm not sending it out. I'm talking in house. No matter. We're just discussing the fine points. We all agree that you can print 9x16 on a larger sheet.
If you want to reply, then
register here. Registration is free and your account is created instantly, so you can post right away.