Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Main Photography Discussion
Battery door removal
Page 1 of 2 next>
Mar 15, 2012 12:24:36   #
Bill MN Loc: Western MN
 
Done a search, can't find it. I assume you have to remove the battery door to install a battery grip on a Nikon D90 or D7000. How do you remove the door? Please no nasty stupid remarks.

Reply
Mar 15, 2012 13:08:53   #
JustBNme Loc: The Darkside...
 
Bill MN wrote:
Done a search, can't find it. I assume you have to remove the battery door to install a battery grip on a Nikon D90 or D7000. How do you remove the door? Please no nasty stupid remarks.


I'm not sure about Nikons but on a Canon there is a spring loaded pin at the hinge point. Open the battery door and where the hinge is there should be a pin that just slides back, You should be able to slide it back with your fingernail... Hope this helps...

Reply
Mar 15, 2012 13:40:21   #
MT Shooter Loc: Montana
 
You do NOT remove the battery door for the D7000 grip, it installs with the original battery already in place. You remove the power port plug from the bottom of the body. The grip allows you to use a second battery in the grip, or with the included adapter, you can use AA batteries also. The only real drawback is that the grip has to be removed to take the body battery out for charging. But you don't NEED to use the body battery unless you want to, it can be left out and all will still work just fine. The body will sense where a battery is. You can also tell the body what battery to use first, either the body or the grip batteries, it will switch to the other when the first one gets low. The body even has a feature in the menu that will tell you the exact amount of power remaining in each battery.

On the D90, the battery and door both have to be removed, but the grip will take a pair of batteries in it.

Reply
Check out Traditional Street and Architectural Photography section of our forum.
Mar 15, 2012 13:43:29   #
GoofyNewfie Loc: Kansas City
 
Not on the D7000.
Just take off the rubber covering the connecting terminals and store it in the place provided on the grip

Reply
Mar 15, 2012 13:45:28   #
tkhphotography Loc: Gresham, Or, not Seattle
 
Bill MN wrote:
Done a search, can't find it. I assume you have to remove the battery door to install a battery grip on a Nikon D90 or D7000. How do you remove the door? Please no nasty stupid remarks.


On the D300s and the D80 you lift up the door at a 30 (?) degree angle and pull it out. It took me a couple times practicing before it became natural....

Reply
Mar 15, 2012 13:46:14   #
MT Shooter Loc: Montana
 
GoofyNewfie wrote:
Not on the D7000.
Just take off the rubber covering the connecting terminals and store it in the place provided on the grip


Damn Goofie, that avatar pic looks like my HS grad picture! LOL

1972

Reply
Mar 15, 2012 13:50:19   #
GoofyNewfie Loc: Kansas City
 
MT Shooter wrote:
GoofyNewfie wrote:
Not on the D7000.
Just take off the rubber covering the connecting terminals and store it in the place provided on the grip


Damn Goofie, that avatar pic looks like my HS grad picture! LOL

Funny you say that, my mom lost track of another son she had...hmmmm.
For those who don't know, that's a Mamiya C-330 on the left and a Miranda G on my other shoulder. 1973

Reply
Check out Infrared Photography section of our forum.
Mar 15, 2012 14:09:25   #
Bill MN Loc: Western MN
 
MT Shooter wrote:
You do NOT remove the battery door for the D7000 grip, it installs with the original battery already in place. You remove the power port plug from the bottom of the body. The grip allows you to use a second battery in the grip, or with the included adapter, you can use AA batteries also. The only real drawback is that the grip has to be removed to take the body battery out for charging. But you don't NEED to use the body battery unless you want to, it can be left out and all will still work just fine. The body will sense where a battery is. You can also tell the body what battery to use first, either the body or the grip batteries, it will switch to the other when the first one gets low. The body even has a feature in the menu that will tell you the exact amount of power remaining in each battery.

On the D90, the battery and door both have to be removed, but the grip will take a pair of batteries in it.
You do NOT remove the battery door for the D7000 g... (show quote)

How do you remove the door on the D90? Does the pin slide sidways?

Reply
Mar 15, 2012 14:21:20   #
tkhphotography Loc: Gresham, Or, not Seattle
 
Bill:
I'm assuming the D90 is the same as the D80, as it is an "upgrade" of the D80.

As I said above, on the D80 lift the door at about a 30 (?) degree angle and it will pop off.

Reply
Mar 15, 2012 14:57:53   #
Bill MN Loc: Western MN
 
tkhphotography wrote:
Bill:
I'm assuming the D90 is the same as the D80, as it is an "upgrade" of the D80.

As I said above, on the D80 lift the door at about a 30 (?) degree angle and it will pop off.

That worked . Thank you.

Reply
Mar 15, 2012 16:33:24   #
MT Shooter Loc: Montana
 
The D80 and the D90 take the same battery grip, so its reasonable the install would be the same. Glad you got it figured out.

Reply
Check out Professional and Advanced Portraiture section of our forum.
Mar 16, 2012 00:44:52   #
BigDaveMT Loc: Plentywood, MT
 
MT Shooter wrote:
GoofyNewfie wrote:
Not on the D7000.
Just take off the rubber covering the connecting terminals and store it in the place provided on the grip


Damn Goofie, that avatar pic looks like my HS grad picture! LOL

1972


You mean you had hair MT Shooter?

Ducking & running for the door! LOL

Reply
Mar 16, 2012 07:19:54   #
jerryc41 Loc: Catskill Mts of NY
 
GoofyNewfie wrote:
Not on the D7000.
Just take off the rubber covering the connecting terminals and store it in the place provided on the grip

New avatar!

Reply
Mar 16, 2012 08:00:27   #
pounder35 Loc: "Southeast of Disorder"
 
GoofyNewfie wrote:
MT Shooter wrote:
GoofyNewfie wrote:
Not on the D7000.
Just take off the rubber covering the connecting terminals and store it in the place provided on the grip


Damn Goofie, that avatar pic looks like my HS grad picture! LOL

Funny you say that, my mom lost track of another son she had...hmmmm.
For those who don't know, that's a Mamiya C-330 on the left and a Miranda G on my other shoulder. 1973


The C330 was (is) an awesome camera. I'll not comment comment on the Miranda.

Reply
Mar 16, 2012 09:05:31   #
GoofyNewfie Loc: Kansas City
 
pounder35 wrote:
GoofyNewfie wrote:
MT Shooter wrote:
GoofyNewfie wrote:
Not on the D7000.
Just take off the rubber covering the connecting terminals and store it in the place provided on the grip


Damn Goofie, that avatar pic looks like my HS grad picture! LOL

Funny you say that, my mom lost track of another son she had...hmmmm.
For those who don't know, that's a Mamiya C-330 on the left and a Miranda G on my other shoulder. 1973


The C330 was (is) an awesome camera. I'll not comment comment on the Miranda.
quote=GoofyNewfie quote=MT Shooter quote=GoofyN... (show quote)


The Miranda was not the best built in the world, but I liked it. Miranda G, 135mm Soligor lens, Tri-X... not that it matters



Reply
Page 1 of 2 next>
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Check out True Macro-Photography Forum section of our forum.
Main Photography Discussion
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.