Ugly Hedgehog - Photography Forum
Home Active Topics Newest Pictures Search Login Register
Main Photography Discussion
Never give up
Page <prev 2 of 2
Dec 24, 2013 09:31:58   #
sus Loc: Ripon,Ca
 
Camera strap on for sure.

Reply
Dec 24, 2013 17:02:37   #
ebrunner Loc: New Jersey Shore
 
Takes a lickin' and keeps on tickin': Good luck with the camera.

Reply
Dec 24, 2013 22:54:56   #
Elliern Loc: Myrtle Beach, SC
 
Jerry, thank you for the link. Have saved that but hope I never have to use it.

Reply
Check out Photo Critique Section section of our forum.
Dec 25, 2013 06:28:09   #
catinacabin Loc: central Minnesota
 
"CPR by rice..." you crack me up!

Reply
Dec 25, 2013 09:42:56   #
Clif Loc: Central Ca.
 
I hope you can get it to come back totally. I find it hard to resist a shot or 2 from Tunnel View each time we go up. I am just starting to get a feeling for The Park.

Jerry, as usual, thanks for the good information.

Merry Christmas to all.

Reply
Dec 25, 2013 11:37:22   #
Ka2azman Loc: Tucson, Az
 
I'm probably going over the hill here. While on duty in Viet Nam, during the rainy season, nothing would dry out. What we would do is build a wooden box and place a (lit) light bulb in it. (up to 100 watts) Anything placed in it would dry out in relative short order. Radio gear, clothing etc.

A second and scientific method of removing moisture is a vacuum. The reduced air pressure increases the evaporation rate. You will need (I'll say special gear) but it is relative easy to get and cheap THAT IS if you already have an air compressor. (that can be expensive.) They USE these vacuum's on air conditioners systems to service them. They vacuum the lines of the air conditioner systems to evacuate the moisture in them, prior to applying (old Freon) R12/R22 version. You can get it at Harbor Freight for under $20. A Compressor vacuum.

Or you could use your shop vac, place the camera in a some what larger plastic bag, make a one way valve on the bag and vacuum. Or get one of those space age vacuum bags that have the valve in them already. This probably would be the easiest and quickest and cheapest, since you can use almost vacuum cleaner that has a hose to use.

Remember a vacuum can crush an Aluminum cans, but your camera should be strong enough to within stand the crushing effects of the vacuum. or just don't suck out the max air it can. Myself I would release the vacuum after an hour, then reapply the vacuum, and do this several times to ensure complete removal of moisture.

The vacuum method should only take hours as to days with the rice method, which I have heard pros and cons for.

Reply
Dec 25, 2013 12:36:38   #
DanRobinson Loc: Charlotte, NC
 
As a (recently) retired Macintosh Consultant, I had several occasions to resuscitate clients' iPhones.

Turn device off. Remove battery if possible and disassemble -- like the lens from a camera. Remove the sim card and leave all the gates open.

In addition to blow-drying, I also used a hand vacuum to pull air through the drowned device. There's no such thing as too much, but eventually, you've sucked out as much moisture as you can expect to get. Then I set the phone on a couple pencils and directed an incandescent desk lamp from a few inches away. Don't get it too close. You want it good and warm, but not hot enough to melt plastic. Give it a day of that treatment.

Results:
Three iPhones, two fully functional and the third lost only the camera.

Reply
Check out The Pampered Pets Corner section of our forum.
Dec 25, 2013 18:10:27   #
speters Loc: Grangeville/Idaho
 
jerryc41 wrote:
The only time I had a camera fhit the ground was over forty years ago, and it was because a leg of a tripod loosened. I'm glad your camera and lens seem to be working. Below are more ideas to save it.

Saving a Wet Camera
March 19, 2013
http://www.redbubble.com/people/peterh111/journal/9049428-how-to-perform-cpr-on-a-drowned-dslr

1. Take the battery out as fast as you can. Yes, it doesn’t take more than a nanosecond to turn the camera OFF (which is the least you should do), but even after doing so there are still volts inside going where ever the water goes. If the charge meets that moisture, your electronics will be fried. End of story.
2. Take the card out. Simple step, but in the panic immediately following the drowning it’s easily forgotten. I know I have.
3. Don’t stand there wiping the exterior of the camera body. You are wasting valuable time. You need to get to a heat source ASAP.
4. Did you drive to your shoot? Get to the car pronto. Now take the lens off and wipe as much water as you can from inside the camera with your lens cloth or an absorbent cloth if you have one, without damaging the mirror or sensor. Tissues are NOT recommended because they will separate and strands will be left inside the body. Even shaking the body while holding it downwards will help. Turn on your car’s engine, turn the car’s airconditioning on full-bore and HOT, and hold the body up to the vents. Keep it there as you drive home or to your hotel, or get your passenger to do it if you have one. (Drive safe but don’t dawdle.)
5. Think as you drive home. How much rice do you have? You’ll need a good 4kgs, so if necessary buy some on the way home, but don’t stop for a Big Mac or a pie. Get long grain, basmati, jasmine, whatever. Just get the damn rice, ok?
6. When you get home, grab a blow dryer and give the body’s interior a good going over. (The camera’s, not yours.) Full blast. Give it a good 15-30 minutes or at least until you can’t see any more water and your camera body is nice and warm.
7. Ideally, whilst you are doing the blow job, someone else is grabbing a pillow slip and putting all the rice in it. Now find an item of clothing. The thinner the fabric the better. The BEST item to grab is a thermal top or thermal pants or similar.
8. Insert the camera body into a sleeve (or pant). This is to prevent rice grains from getting inside the body. Don’t “wrap” the item of clothing around the body because you want as little as possible coming between the moisture-sucking rice and the body. Now immerse the body in the rice. If the body is in a sleeve, you can leave the rest of the item of clothing hanging out, just make sure the body is immersed in rice.
9. Put the bag on a table next to a fan. This will help keep moisture from hanging around.
10. Leave the body in the bag of rice for as long as possible. Note that I haven’t said you can turn the camera on. That is the hardest bit – resisting the temptation. Give it a week. Seriously.
11. When you finally can’t wait any more and turn the camera back on, do not leave it on. Turn it back off and put it back in the bag of rice even if the camera seems to be working. CPR by rice takes time.
As I said, no guarantees any of the above will save your drowned buddy, but hopefully you can give it at least your best chance to survive. Bear in mind that repairing a drowned DSLR, if possible, can end up costing nearly as much as getting a new one, if not more.
The only time I had a camera fhit the ground was o... (show quote)

I got lucky a few years back, as a little kid ran around and into my tripod (with 5D MII attached), tipped the whole thing over. I could not get there in time to prevent it from hitting the pavement. So I watched it hit the ground. Luckely, the only thing that happened to it, was a cracked Sun shade.

Reply
Dec 26, 2013 02:00:29   #
busted_shutter
 
sus wrote:
The camera info is wrong but the camera settings all wrong.

You might try to download a camera firmware update. No guarantees, but it works when .exif. data is wrong in other situations.

Reply
Dec 26, 2013 02:09:17   #
busted_shutter
 
sus wrote:
Camera strap on for sure.

Dirty mind...lol...never mind! :-D

Reply
Dec 26, 2013 04:08:55   #
georgevedwards Loc: Essex, Maryland.
 
Do you remove the lens before immersing in rice? Do you let rice into the interior via the empty lens opening?
jerryc41 wrote:
The only time I had a camera fhit the ground was over forty years ago, and it was because a leg of a tripod loosened. I'm glad your camera and lens seem to be working. Below are more ideas to save it.

Saving a Wet Camera
March 19, 2013
http://www.redbubble.com/people/peterh111/journal/9049428-how-to-perform-cpr-on-a-drowned-dslr

1. Take the battery out as fast as you can. Yes, it doesn’t take more than a nanosecond to turn the camera OFF (which is the least you should do), but even after doing so there are still volts inside going where ever the water goes. If the charge meets that moisture, your electronics will be fried. End of story.
2. Take the card out. Simple step, but in the panic immediately following the drowning it’s easily forgotten. I know I have.
3. Don’t stand there wiping the exterior of the camera body. You are wasting valuable time. You need to get to a heat source ASAP.
4. Did you drive to your shoot? Get to the car pronto. Now take the lens off and wipe as much water as you can from inside the camera with your lens cloth or an absorbent cloth if you have one, without damaging the mirror or sensor. Tissues are NOT recommended because they will separate and strands will be left inside the body. Even shaking the body while holding it downwards will help. Turn on your car’s engine, turn the car’s airconditioning on full-bore and HOT, and hold the body up to the vents. Keep it there as you drive home or to your hotel, or get your passenger to do it if you have one. (Drive safe but don’t dawdle.)
5. Think as you drive home. How much rice do you have? You’ll need a good 4kgs, so if necessary buy some on the way home, but don’t stop for a Big Mac or a pie. Get long grain, basmati, jasmine, whatever. Just get the damn rice, ok?
6. When you get home, grab a blow dryer and give the body’s interior a good going over. (The camera’s, not yours.) Full blast. Give it a good 15-30 minutes or at least until you can’t see any more water and your camera body is nice and warm.
7. Ideally, whilst you are doing the blow job, someone else is grabbing a pillow slip and putting all the rice in it. Now find an item of clothing. The thinner the fabric the better. The BEST item to grab is a thermal top or thermal pants or similar.
8. Insert the camera body into a sleeve (or pant). This is to prevent rice grains from getting inside the body. Don’t “wrap” the item of clothing around the body because you want as little as possible coming between the moisture-sucking rice and the body. Now immerse the body in the rice. If the body is in a sleeve, you can leave the rest of the item of clothing hanging out, just make sure the body is immersed in rice.
9. Put the bag on a table next to a fan. This will help keep moisture from hanging around.
10. Leave the body in the bag of rice for as long as possible. Note that I haven’t said you can turn the camera on. That is the hardest bit – resisting the temptation. Give it a week. Seriously.
11. When you finally can’t wait any more and turn the camera back on, do not leave it on. Turn it back off and put it back in the bag of rice even if the camera seems to be working. CPR by rice takes time.
As I said, no guarantees any of the above will save your drowned buddy, but hopefully you can give it at least your best chance to survive. Bear in mind that repairing a drowned DSLR, if possible, can end up costing nearly as much as getting a new one, if not more.
The only time I had a camera fhit the ground was o... (show quote)

Reply
Check out Film Photography section of our forum.
Dec 27, 2013 21:39:31   #
doduce Loc: Holly Springs NC
 
busted_shutter wrote:
Dirty mind...lol...never mind! :-D


Well played, sir. :-D

Reply
Page <prev 2 of 2
If you want to reply, then register here. Registration is free and your account is created instantly, so you can post right away.
Check out Close Up Photography section of our forum.
Main Photography Discussion
UglyHedgehog.com - Forum
Copyright 2011-2024 Ugly Hedgehog, Inc.